How do you calibrate the monitor??

for graphic design, the monitor's calibration is way off. but i can't figure out how to calibrate it!@#$%
PLEASE HELP
I can't be the only guy out there with this issue...
Thanks
This question was solved.
View Solution.

Hi,
Please try:
   http://windows.microsoft.com/en-au/windows7/calibrate-your-display
As a graphic designer, I would not use the screen of an AIO machine to do my work, I need a proper screen which may cost hundreds dollars more.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do you calibrate the iPad battery?

    How do you calibrate the iPad battery and is it necessary to discharge battery 100%. I have  the 3 rd generation iPad, it has been almost a year since I purchased it and the battery when fully charged reads 100%. Recently, I visited my local Jump Plus store and the staff said I should drain the batteries on my iPad & iPhone completely until they are dead and recharge once a month. Is this accurate?  It is my understanding that you should not drain the batteries completely? Also, is that the same as calibrating the battery?

    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    http://www.apple.com/batteries/ipad.html

  • How do I calibrate the monitor to the printed photo for equal color tone and brightness?

    Where in the program do I calibrate the monitor color to the resulting printed color.  My printed photo is much duller and "blacker" than the monitor.  Other color programs has a setup section to plug in the monitor's ICC profile along with the printer used so the resulting printed photo is very close to your adjusted photo on the monitor.

    blessedby3 wrote:
    I just got my laptop and I'm a photographer.  It is very important to get my laptop similar in color to my photos.  So when they are printed they look similar to most basic commercial printer (Walgreens etc)  I had no problem on my old computer. My Satellite seems very bright and the people looked washed out.  I used th ctrl, alt f12 key and there was a contrast adjustment.  I just can't seem to get a nice natural color from the computer.  Can someone let me know what they use or what looks good to them.  The factory default seems way to bright and people look to bright??  Thanks so much in advance...
    Katie<><
    Perhaps this gadget might help:  Pantone huey MEU101

  • Apple Loops - How do you change the monitoring output?

    Anyone know how to change the default output of the Apple Loop player to another output (eg. 5-6), or is this just wishful thinking?

    Very easy. Go to the mixer tab, and select the ALL button at the top of that window. You should see a channel strip called Prelisten, usually on audio channel 256. Change that output to whatever, and that will change the monitoring output for loops, the bin, and the Sample Editor.

  • How do you calibrate the touch display on an HP B210a?

    Well, I screwed up. I was messing around in the service menu (stupid me). I hit calibrate touch screen thinking it would be beneficial, but it ended up with me not knowing what I was doing, and now I cannot get the printer to respond to touch. So, how do I calibrate it so it works if I can't get it calibration? Please DONT say send it to HP, I really need to know how to do this on my own.

    I still need help

  • How do you calibrate the compass iphone with ios7 out by 35deg.

    Cant find anyway to calibrate the compass, is there one? Its out by 30-40 degs. And when changing it to true north it changes nothing, it still out by 30-40degs.

    I just got a new 5S and I can't seem to get the calibration to be accurate. I have redone the calibration several times and it is always off by a few degrees.
    I also have a 5 which once calibrated is totally fine.
    Both phones were calibrated in the same spot so I doubt interference is a factor. Is there an issue my new 5S? Like I said I used the same procedure to calibrate both. The 5s is 2 -3 degrees off and the 5 is perfect.

  • How do you tell the free hard drive space on macbook pro 10.6.8

    how do you tell the free hard drive space on macbook pro 10.6.8

    Open Activity Monitor and look at the drive space info
    see graphic here
    Why is my computer slow?

  • How do you reduce the size of the print diolog box when printing a pdf file?

    How do you reduce the size of the print diolog box when trying to print a PDF file? The print button is below the task bar.

    What is your monitor's screen resolution?  See http://www.adobe.com/products/reader/tech-specs.html

  • U410 Windows 8 how do you split the screen in two?

    I have an IdeaPad U410 with Windows 8 as an Operating system. I would like to know how do you split the screen in two. Also I would like to know if I can put my screen as a touch?
    Moderator Note; subject edited for relevancy

    hi BoJ,
    Welcome to the Lenovo Forums.
    If you're referring to having an extended display , you will need to have an external monitor and enable extended mode by pressing the Winkey+P and select Extend.
    If you want to split the screen to work with 2 documents or 2 windows at a time, you can snap the windows by pressing Winkey+ Left or Right arrow - check this article in reference.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How do you connect two monitors to macmini

    how do you connect two monitors to macmini

    Hello, is this the latest Mini?
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    768 MB*
    Details:
    *With 4 GB of RAM installed, this model uses 512 MB of RAM for graphics. With additional RAM installed, more RAM is reserved for graphics use.
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html

  • How do I calibrate the on screen ruler

    How do I calibrate the on screen ruler so it measures the same as a hand held ruler?

    http://www.photoshopessentials.com/essentials/print-size/
    After you follow the instructions, the onscreen rulers in View > Print Size will match a physical ruler.

  • How do you lock the screen on iphone 4?

    How do you lock the screen on iphone 4 while on a call? I mute calls, activate face time and I have even called someone by accident during a call. I know there has to be a way to fix this. Please HELP!

    It locks automatically when you hold it to your head.
    If it fails to do this, then remove the case and see if it solves it.
    If it does not, then do the basics - restart, reset, restore.
    If that does not solve it, then make an appointment at the genius bar.

  • From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    Hi,
    Use NVL or COALESCE:
    NVL (col_a, col_b)
    Returns col_a if col_a is not NULL; otherwise, it returns col_b.
    Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
    For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

    I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
    Thanks

    Hi,
    This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
    You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
    https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
    http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
    Benoit Lecours | Blog: System Center Dudes

  • How do you modify the web.xml to lock down the pages from a user role

    how do you modify the web.xml to lock down the pages from a user role

    I'll make a stab at your question:
    The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:
    <!-- security constraints -->
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>protectedA</web-resource-name>
    <url-pattern>/protectedA</url-pattern>
    </web-resource-collection>
    <!-- authorization -->
    <auth-constraint>
    <role-name>sr_developer</role-name>
    </auth-constraint>
    </security-constraint>
    Sun's explaination here:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

Maybe you are looking for