How do you calibrate the touch display on an HP B210a?

Well, I screwed up. I was messing around in the service menu (stupid me). I hit calibrate touch screen thinking it would be beneficial, but it ended up with me not knowing what I was doing, and now I cannot get the printer to respond to touch. So, how do I calibrate it so it works if I can't get it calibration? Please DONT say send it to HP, I really need to know how to do this on my own.

I still need help

Similar Messages

  • How do you calibrate the iPad battery?

    How do you calibrate the iPad battery and is it necessary to discharge battery 100%. I have  the 3 rd generation iPad, it has been almost a year since I purchased it and the battery when fully charged reads 100%. Recently, I visited my local Jump Plus store and the staff said I should drain the batteries on my iPad & iPhone completely until they are dead and recharge once a month. Is this accurate?  It is my understanding that you should not drain the batteries completely? Also, is that the same as calibrating the battery?

    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    http://www.apple.com/batteries/ipad.html

  • How do you disable the "Touch to return to call" banner on the top of the screen?

    How do you disable the "Touch to return to call" banner on an iPhone 4s and it is factory unlocked?
    Thank you.

    If your trying to just simply have it not show while navigating the OS during a call, then there is no option to disable it. If it's a problem where it's continuing to show after you disconnect a call it could be a fault in code that fails to run the script to terminate the banner need upon disconnect. I would restore the phone using itunes as a first troubleshooting step. Another avenue might be an issue with the phone failing to recognize the end of call signal from the carrier. In which case I would have the SIM card changed. Easy thing to do at your local carrier store.

  • How do you disable the touch screen (Broken and handicapping normal mouse use)

    Hi, I have an ideacentre B540. My two year old daughter did something to my computer when I wasn't in the room and ended up busting it right on the top left corner. There is only one hairline crack that was visable in the upper left corner. I've found a replacement LCD screen, but cannot afford it right now, so... Meanwhile, I would like to just disable the touch portion of my computer, because often, it will think it is active (probably damaged the sensor in the fall :-P and take the power away from my  mouse, open random windows, and generally... Make an otherwise normal PC unuseable. Is there ANYTHING that I can do to disable the touch pad? Even a list of the touch specific processes that I can immediately delete upon startup would be great, because it seems to give me a few minutes before it decides to start acting up. Thanks!

    hi SharaLynn,
    Sorry to hear about your trouble.
    Can you try these methods to disable the touchscreen:
    For Windows 7:
    1. Click on Start > type Pen and Touch and run the app
    2. On the Pen and Touch window,  click on the Touch Tab and uncheck Use your finger as an input Device and hit apply the settings (Source: Disable touchscreen on Windows 7)
    For Windows 8:
    Check this website for screenies
    Let me know your findings.
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How do you calibrate the compass iphone with ios7 out by 35deg.

    Cant find anyway to calibrate the compass, is there one? Its out by 30-40 degs. And when changing it to true north it changes nothing, it still out by 30-40degs.

    I just got a new 5S and I can't seem to get the calibration to be accurate. I have redone the calibration several times and it is always off by a few degrees.
    I also have a 5 which once calibrated is totally fine.
    Both phones were calibrated in the same spot so I doubt interference is a factor. Is there an issue my new 5S? Like I said I used the same procedure to calibrate both. The 5s is 2 -3 degrees off and the 5 is perfect.

  • How do you calibrate the monitor??

    for graphic design, the monitor's calibration is way off. but i can't figure out how to calibrate it!@#$%
    PLEASE HELP
    I can't be the only guy out there with this issue...
    Thanks
    This question was solved.
    View Solution.

    Hi,
    Please try:
       http://windows.microsoft.com/en-au/windows7/calibrate-your-display
    As a graphic designer, I would not use the screen of an AIO machine to do my work, I need a proper screen which may cost hundreds dollars more.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do you get the Touch to not shuffle a playlist?

    I created a playlist for a class I teach, in a specific order. When I go to play it, it shuffles the playlist even though I did not hit the shuffle button. What am I missing? The shuffle is there to "shuffle" if I ask it to, so why is it doing it when I don't? Makes it hard to teach when it keeps changing the order.

    The problem may not be Shuffle. iTouch changes the order of my playlists when they are put in a folder for syncing or transferring from iTunes to the iTouch - before they are ever transferred/synced. I am still trying to find out how to get it to maintain the order I set up when I created the Playlist of Songs in the first place in iTunes on my Mac. Very annoying and frustrating and that goes for the rather paltry instructions offered with this $300 device, too.

  • How do you use the Thunderbolt display without having to charge the MacBook Pro ?

    It seems my MacBook Pro retina has to be charging in order to use theThunderbolt display. When I close the Macbook lid and I remove the charger the display goes off. Is there anyway I do not have to be charging my laptop in order to use the display?

    No,  Clamshell mode needs external power.

  • How do you change the fields that are displayed on the email preview list after a search?

    How do you modify the fields that are displayed in the mail preview list in the center column of Mac mail after you conduct a search of your email?   All of a sudden the displayed fields changed on me whenever I do a search in mail.   When I have not filtered my email with a search, the default field shown in bold at the top of each message's preview is the "From" field.   However, when I do a search this changes to the "To" field.   Can anyone help?   Thanks, ccarey

    ipicus
    But why would you want this?
    iTunes is responsible for the File Management, let it get on with it, you do your organisation in the iTunes window. And everything you need to do, you can do via the iTunes Window. Want to find the file of a track quickly? Right click on it in the iTunes Window and select Show File: A finder window pops open with the file already selected.
    Regards
    TD

  • Zen Vision M: How do you get the Display to st

    How do you get the display to stay on when using a transmitter to play songs on the radio? Everytime I connect the transmistter, the Zen display shuts off so I can't select and change songs without disconnecting then reconnecting to play. I don't know if there is a simple option that I'm just not getting. Any suggestions?Message Edited by SKC909 on 04-26-20070:42 PM

    SKC909,
    Are you connecting the transmitter to the player headphone jack or the AV out? From your post, it sounds like you're doing it from the AV out. If that's the case, go to the player System->Video setting and disable Video out.
    Jason

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • I have the Apple IPod touch 4th generation. How do you update the iOS HELP!

    how do you update the ios on an ipod touch 4th gen.

    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972

  • How do you know the best iMac display size

    how do you know the best iMac display size
    Only on them fits in the screen window and that makes the font so tiny.  The others are too wide or too tall.  I usually view at 150 - 200% for vision issues.

    You say it's better to do the Media Browser?  I'm fairly new to movie, dvd and garage band.  How would I go about using the Media Browser instead of straight to iDVD?
    Select Your project - go up to Share - Share to Media Browser and as Large (Not HD)
    In iDVD select a nice theme - click on Media button - click on Movie - Select Your movie.
    NOW - Save as a DiskImage - and test this before burning DVDs - if this Plays OK then either burn the Image by using Disk Util tool (and set down burn-speed to x4) - or burn via iDVD (will take more time)
    I want to keep as much quality as I can.
    Then don't use iMovie'08 or 09 or 11 - as they all discard every second line resulting in less quality on the DVD. I use iMovie HD6 or FinalCut any version.
    Also...I tried to split my project in iMovie...but couldn't find a way.  I wound up just making a copy and then deleting out a handful of scenes from the copy...I still have the original at 4:12hrs.  Is there a way in iMovie to split a project? 
    I would make a copy and cut away a bit from the end - calling this Part 1 and from start of the other copy Part 2.
    OR - there are other programs that can squees in more to a DVD e.g. Roxio Toast™ - BUT this has two cons.
    • It costs - to me it was well spent mony as it can so much more e.g. back engineer a DVD to an editable form
    • Squeesing in more on a DVD - costs in QUALITY - and as You want as much as it can be - then 90 minuts portions encoded with Pro-Quality encoding and full quality interlasced material from a video-editor that delivers this is the way to get 100% of what DVDs can do.
    DVD is as standard only SD-Video - HD not possibly. Then You need Blu-Ray. (also Roxio Toast™)
    Yours Bengt W

  • HT4972 how do you change the default email on an ipod touch?

    How do you change the default email on an ipod touch so i can verify it?

    Settings>Mail>Default account.
    I do not understand what that has to do with verifying the email address.

  • How do you adjust the brightness on a Thunderbolt Display

    How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

    I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare  - thanks Andrew - got me there. It seems daft!
    The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
    At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
    So:-
    Apple menu >
    System Preferences>
    Displays>
    Click Arrangement [at the top]
    Click Mirror Displays [at the lower left]
    That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
    Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
    Hope this works for others.

Maybe you are looking for