How do you change the 4 seconds preset duration when selecting clips?

When you select piece of clip in an event, how do you change the 4 seconds preset duration?

Hi
in iMovie'11 (as I don't have any iMovie'13 (v10)) and You note that You also use iM11
Go up to the top row Menu and select "Setings" (Inställningar)
and here select Browser (Bläddrare)
and at bottom of this You got three options
and can select ALL or up to 10 seconds
I use click + alt (option-key) to select all of the Clip in Events - then fine tune it in my project.
Good Luck
Yours Bengt W

Similar Messages

  • How do you change the speed of a detached audio clip?

    I have a piece of detached audio.  Video Frame rate is 23.98.  The piece of Video above it is Video Frame Rate 24.
    How do I change the speed of this detached audio clip?

    Nope, the Automatic Speed did not work.  I exported the XML, and then ran it through X2Pro to try and get my AAF, and it still spits out conform warnings/errors on those same spots.  Automatic Speed apparently did nothing helpful to my situation.  (Can Anyone explain Automatic Speed?)
    Will have to try going through Cinema Tools per the similar issues noted in this conversation: http://forums.creativecow.net/thread/344/28007
    Curious to see what FCPX would do with this media, importing the 24p file to a 25 Project cause a noticeable shift in both time and pitch.
    I imported the time coded audio separately, and played it against the obviously speed and pitched changed video with embedded audio. The files did not sync.
    The audio remained in time and pitch, while the video didn't. So the audio tc doesn't seem to effect playback in FCPX, but video definitely does, and it seems rather buggy.
    So, if your video is 24.0 and your audio is 23.98 and you are in a 23.98 timeline, FCPX might be changing the speed of the video without really reporting it. Resetting speed doesn't do anything, hitting "automatic speed" screws it up a bit more (it goes the wrong way). Changing the speed to something like 96% (FCPX reports 96% but I know it's really ((24000/1001)/25) which is just short of 96%. Turning off the "preserve pitch" checkbox actually pitched the audio back to normal.
    I didn't create the 24.0 vs 23.9 media that you have, but perhaps you are having similar issues, or a different combination/permutation therein.
    But to answer your question, the time coded audio was not changed, only embedded audio.
    and
    But here some notes which makes things hopefully clearer.
    Resampling and changing playback speed are two totally different things.
    Samplerate for audio is the same as fps for video (not dpi for video) so let's call it sps.
    You can record audio at any sampling rate. But let's take 48 kHz and 32 kHz here.
    Record 60 seconds. Once recorded both files as stand alone files will play 60 seconds.
    But forced to play back in a NLE timeline with a fixed sps of 48 the first file will playback correctly. The second one will play at 2/3 of the time (32/48). The other way round the 48 sps file will play longer in a 32 sps timeline.
    Now for those poor guys who have to work with NTSC:
    A real world second is not a second in NTSC video world. Its 1001/1000 seconds.
    So selecting a 48k sps audio preset in a timeline preset means that a real world audio of 60 seconds is only 1000/1001x60. That means that those 60 seconds are only 59.94 seconds long. Its too short.
    One way - if you stay strictly in NTSC - is to record audio with 48048 Hz. This way a real world 1 second audio will match a 1 second NTSC video.
    Next option with BWAVE files is to change the playback settings in the BEXT header of the file. This won't resample the file!!!
    Now about the TC. BWAVE doesn't have a TC in a way you're used when handling video. It has a timestamp in the header. This timestamp contains the Samples after Midnight. Based on that the NLE will convert this to TC which can be displayed. So in NTSC world this might give a wrong interpretation.
    For example if you have a "Start TC" of 00:10:00:00 (thats what you see on your audio recorder) it means that using 48kHz the timestamp is at 600x48,000 = 28,800,000 samples. Since the real sampling rate in the timeline though is 48048 Hz you have to divide the source stamp by this number. This results in 9.99000999000999 minutes. So for a 23.976 fps project this is a TC of 00:09:59:10.
    So setting the Bext header and/or iXML chunk to the correct playback speed will keep everything intact. Again this is without resampling!
    Using an AIFF there aren't these options.
    So you can edit all the stuff without resampling when using BWAVE. But resampling will happen when you export a final movie.

  • How do you change the default return email when distributing a PDF form

    Hello everyone,
    I am trying to distrube a pdf form as a customer survey to various client/contact emails.  As a test, I chose to distribute the form, filled in the form distribution information and I send the form to myself. However, when I filled it out and chose 'submit form' it prompted me with the return email address that I know is incorrect and want to change.
    As the author of the form, I need to change the default return email address, but there is no option to do so when I choose to distribute the pdf form  or any new form that I create (only prompted me the very first time I chose to distribute a form). 
    Does anyone know how to change the return email address and information for form distribution?  Can someone please help me with this? 
    Thank you very much!
    -Ryan

    The email address that it uses it what is set in the Identity user preference: Edit > Preferences > Identity > Email Address
    so change it there before you distribute.

  • How do you change the font InDesign uses when no style is applied?

    All my InDesign templates (CS4) are now looking for [Times (T1)] in odd places such as spaces between words in a header, the space after the last period in a paragraph or blank returns between paragraphs. I tried all the normal suggestions (checking every character and paragraph style including "basic paragraph", selecting a font in the charater pallette with and without a document open, and even clearing indesign preferences and cache files). After all this, I created a brand new blank document to test whether or not this occured in anything other than my template files. I didn't create any styles at this point, just drew a text box and started typing. In the new document the first line is in the font I chose, but when I hit return the next is in Times. It appears that after the return InDesign switches from Basic Paragraph back to "no styles". Is there a way to change this default font or prevent blank spaces and returns between paragraphs from turning to this setting? Thanks for any suggestions. With one file it's not that big of a deal to find and replace but when you start working with a book containing many files it is quite a hassle to wade through the missing font windows in order to verify it is only this and not an actual font missing. 

    With no documents open.
    Go the Paragraph Styles Panel
    Clear Overides for the Basic Paragraph
    Edit the style
    And change "Apply Next Style" to "[Same Style]"

  • How do you change the timeline duration in Photoshop CC?

    There seems to be 5 second limit on the duration of the timeline in Photoshop version 2014.
    How can you extend the duration of the animation? There's a timeline window, but no "animation" window as mentioned in many of the help files.
    How do you change the duration in Photoshop  2014?
    I'm using Windows 8.1 as my OS.
    Thanks.

    Thanks for the reply, but my point was not about the lack of creating animations.
    It seems that in Photoshop CC, you cannot change the duration of the timeline unless you click on the end of a clip and drag it out which will then give you more time.  As the original post mentioned, you automatically get a 5 second duration unless you have a video clip that is of longer time.  This all makes sense for videos, I understand that nobody (usually) wants to stretch video.  Video by nature will extend the timeline based on how much footage is present.
    Now take an animation scenario where you want to create something from scratch that spans longer than the default 5 seconds.  There is no option!!! No document settings, nothing that will allow you to extend the timeline.  I now have to click and drag each layer clip on the timeline to give it more time for the animation, one by one might I add (you can't even highlight multiple clips and extend them all at once, which is crazy).
    So what does this mean?  Well if you create a mockup of something with all of these intricate layers including backgrounds, copy etc. and you only intended to animate a certain piece for say 8 seconds, you'll have to extend each and every single layer clip in the timeline otherwise they will magically disappear and the only thing displaying is that which you have extended manually.
    The reason why you need a document settings in the timeline is to prevent content from disappearing if something extends for a certain amount of time.
    Frame by frame animations only allow for so much functionality, try to animate multiple objects at once with frames and go back and make a change to one part...
    CS5 would simply show everything regardless if they did nothing on the timeline, it allowed you to see all of your elements present.
    Again, I stand by my statement saying that the new timeline is flawed.

  • In the latest version of iMovie how do you change the duration of the clips

    In the latest version of iMovie how do you change the duration of each clip?

    Try 'window' (in the menu bar)>movie properties>settings
    http://help.apple.com/imovie/mac/10.0/#mov4e66c1a8b

  • How do you change the time of day presets in ical?

    How do you change the time of day presets in ical?  I would like them to be only 1 hour difference, with the preset start times of 10:00 am and end time of 6:00 pm, if I have anything starting after 4:00 pm it also changes the date to the next day.  Incredibly annoying!

    Hi there jenni6,
    It looks like this is possible in the Calender prefernces. Take a look at the article below for more infromation.
    Calendar (Mavericks): General preferences
    http://support.apple.com/kb/PH14994
    -Griff W.

  • How do you change the direction of a Tween Wipe effect

    Hi all,
    Completely new to the forums and I hopefully my query is straight forward.  How do you change the direction in the pre-built tween effects available within Flash CS3 (primarily the Wipe effect).  Example code:
    var Animate_Box:Tween = new Tween(Box, "height", Strong.easeInOut, 0, 200, 1, true);
    OR
    var Animate_Box_2:Object = {type:Wipe, direction:Transition.IN, duration:1, easing:Strong.easeInOut};
    TransitionManager.start(Box_2, Animate_Box_2);
    Many thanks in advance.
    Kam
    ANSWERED:
    Sorry for posting something so pointless!
    You simply add 'startPoint:5' onto the end i.e.
    var Animate_Box_2:Object = {type:Wipe, direction:Transition.IN, duration:1, easing:Strong.easeInOut, startPoint:5'};
    TransitionManager.start(Box_2, Animate_Box_2);
    startPoint:5' = can be any number depending on the direction of the Wipe you want.
    Thanks,
    Kam

    What you really want is a way of automatically mirroring the the X and/or Y coordinates of the keyframes within the effect. This ability would be very useful.
    But right now there's no way to do that. You'd have to do it manually. That effect actually uses the Slide parameter to generate the movement (instead of a discreet X/Y coordinate for the position.) Changing the first keyframe value of the Slide parameter to a negative number still doesn't give the effect I think you're looking for.
    So, it's probably easier to just rebuild the effect the way you want it from scratch.
    Bony

  • How do you change the name of a folder/file on an expansion drive

    How do you change the name of a folder/file on an expansion drive or external hard drive?

    The same way you change it on the internal drive; click on the name and wait a second or two for the field to drop into editing mode, then just type the new name. Or Get Info on the file/folder and change the name there.
    Regards.

  • Hello how do you change the account name

    Hello I've bought a second hand Mac mini.
    Under system  preferences...users and groups...user admin...advanced options
    How do you change the user ID, Group, Account name and home directory name?
    When I go to do this there is a warning sigh that the user won't be able to log in. As I'm the new owner of the Mac mini I'd like to put my own name there but not share if I'm doing it right.
    Thanks Edd

    Hello Eddie,
    Good thing you asked, not that easy, & can be dangerous...
    http://support.apple.com/kb/ht1428
    If it were me, I'd just make a new admin account, leave the old one for emergency use.

  • How do you change the My Info data?

    I have a couple of questions I hope someone can help me with.  First, how do you change the data listed on MY INFO?  Secondly, when I go to MY CONTACTS I do not get the + to add or the edit function.  Can someone please help with these questions?

    go to Settings -> General -> Siri->my info and choose from the contact list the right info. If your information in the contact list is wrong, then yu might want to start with correcting that info first

  • How do you change the number of rings before a call goes to voicemail?

    How do you change the number of rings before a call goes to voicemail.

    You can't; it's set by Verizon at 30 seconds.

  • How do you change the name on how your seen on air drop?

    How do you change the name on how your seen on air drop?

    When the ipod is plugged in and showing up in the left sidebar in iTunes (under devices), click once on the name in the sourcelist, and pause with the cursor hovering over the name for about a second. The name should become editable for you.

  • HT5312 How do you change the email address used to send security answers?

    How do you change the email used to send the security answers you have forgotten? I have changed the alternative email adress in Name, ID and Email Addresses but this does not change the email address in the Password and Security section.

    Jus what do you want to accomplish? The Apple ID email address is used for variosu thing onthe iPod like:
    - For purchasing media. Srrings.iTunes and App stores. Sing out and sign into anoterh account
    - Settings>iCLoudl for iCloud account
    - Settings>FaceRome for Apple ID and where You can Be Reached At email address
    - Settings>Messages for Send And Receive email address.
    - Maybe for Game Center

  • Same question for the "2 iPhones in one account".....How do I change the name.  My iPhone is showing my wife's iPhone name when I am syncing it.  Why is that?  I know about using one iTunes account....But how do you change the name w/o erasing your data?

    Hi....How do you change the name?  When I sync my iPhone, it shows my wife's name on it?

    Unfortunately it is not doing it....
    Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
    Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update. 

Maybe you are looking for

  • Query regarding validation in a BPEL process

    Hi, I need to validate an XML document( a BPEL variable) against a schema.I used the validate activity.But when the exception is thrown by the validate activity in case of an invalid document, it is only reporting the first error that it encounters.A

  • I canot open a pdf file on my galaxy tablet, but i do can in my macpro

    why can i not open a file in my galaxy tablet, I saved a book from college in your cloud from my mac pro, but when i try to access the same thru my tablet i cannot unlocked.  why?

  • Commissions

    Dear experts, we have a legal requirement to process the payment of Intra-company commissions with a debiting process instead of a crediting process (as we are using up to now). Currently we are collecting the commission values on Rebate Agreements w

  • MYSQL Query

    I have a question to a MYSQL query (using PHP) in a site I created for a client. I need to output the sum of one particular column in a table. I created an "exercise counter" for subscribers to this particular page, which is supposed to help them kee

  • Eap-tls configuration assistance

    I am trying to get eap-tls working on my wireless network, with machine authentication. I have followed the numerous configuration guides on CCO but seem to be running around in circles. So can someone please give me a sanity check. Scenario MS CA (W