How do you change the document settings of an alternate layout?

When you create an alternate layout this modal pops up allowing you to choose a page size with width and height dimensions. After you've selected "OK" how to you get back to this modal? When you go to File > Document Settings it only shows the settings for the main layout (frist layout created). How do you get to the doucment presets for an alternate layout?

You could use the Page tool.
In the Pages panel, highlight the master page used by the alternate layout you want to change. Choose the Page tool. Enter a new page size. Because you're applying this to the master page, it will apply to all the document pages based on it.

Similar Messages

How do you change the dpi settings in iPhoto

How do you change the dpi settings in iPhoto

Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

How do you change the light settings in Nokia C3

The light is too bright and I don't know how to change the light settings Help me please!

It would be very useful to have this feature, but it's a fixed setting in many Series 40 phones. You cannot change brightness on the C3.
Nokia Lumia 520 3046.0000.1329.2001 RM-914
Nokia Asha 302 V15.09 22-05-13 RM-813

How do you change the facetime settings on a macbook pro

i let a friend use the FaceTime app on my macbook pro but i no longer want to be on her account i want to be on mine. How do i switch the account settings?

Hi casey here what to do open ur face time on dock station then go to facetime menu top left screen then go to preferences and then u see id account,select ur prefer id account what ever you like.

How do you change the following settings...

I am an adult education teacher who needs to scan a large amout of material for my students. I scan them to the computer as pdf files. I foumd some old scans in my My Documents folder but I cannot find the ones I just scanned two minutes ago.
Is there a way I can change:
1. The default directory that scans are sent to
2. The scan prefix so they don't all say "scan" at the beginning of the file name.
Here are my specs
I use the OfficeJet 6700 Premium on Windows 7 and the printer is being used wirelessly.
I just have to say how much I love this printer! It prints faster than the 7200 I had previously and is much easier to use! The scan cover is also lighter and I can lift it up myself even with my weak arms and hands due to my splastic cerebral palsy. Thanks for making a great product!

Hi @cparissi ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
First off, very happy to hear you love the product, it truly is a great one! I understand you are having trouble with the whole scanning portion of the printer.
Here is a document that will help you learn to scan from the software not the hardware. Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers
Let me know if this helps you understand the software scanning process better. Look forward to hearing back from you.
I worked for HP.

How can you change the import settings in iTunes 8?

The option in "Advanced Preferences" to say what format you want to import tracks no longer seems to be available in iTunes 8. Where is it?

I too have problems importing CDs. I get an error message that says, "Error occurred while converting the file, you do not have enough privileges". Being a very recent convert from PCs I am a relative novice I cannot find my way around this machine very well and do not know how to change the privileges. I have got as far as altering permissions in Get Info, and have done the Repair disk permissions in the Disk Utility, but to no avail. Can anyone help please, I have to rescue the situation before my wife throws the machine out the window and forces me back top the dark side!!
Thanks

How do you change the default setting for RTF documents from TextEdit to MS Word

How do you change the default setting for RTF documents from TextEdit to MS Word, I download forms from the Canadian government and they use RTF as a standard, they are supposed to open as MS Word documents (Yes I have Office for MAC 2011) but when download the document it goes to TextEdit which messes up the form format. I can down load it right click and go "open with" MS Word but how can I get the default chnaged to save this step.

richr604 wrote:
Thanks I knew this, I like Safari as I want to keep everything MAC, but if I use Firefox the documents open in MS Word straight away, I was just curious if there was some setting I could change?
In Firefox > Preferences, click the Applications tab. If RTF is there, use the pulldown menu in the Action column to pick MS Word. If RTF is not there, there are instructions here for how to add file types.

How do you change the phone number on an ipad mini in the imessage settings?

How do you change the phone number on an ipad mini in the imessage settings?

The Phone number of a Cellular iPad is assigned by the carrier the iPad is connected to. Usually changing the sim card will change this number.
If that is not what you mean can you please explain in more detail

HT3529 How do you change the settings so when you search your iPad it doesn't show the iMessages?

How do you change the settings so when you search your iPad it doesn't show the iMessages?

You could adjust the mailnews.tcptimeout preference, as explained in the 2nd point in [http://kb.mozillazine.org/Can_not_send_large_attachments this article]. Also, make sure there's no security program scanning outgoing mail attachments.

How do you change the lettering style of a adobe document that has been sent to you?

How do you change the lettering style of a adobe document that has been sent to you?

You can do this with Acrobat, but, as Claudio says, it's not possible in Adobe Reader.
If you do have Adobe Acrobat, you can learn how to modify text styles here.

How do you change the nominal range settings from 0-10v to 0-1v

Currently using a PCI-6052E with Mac OS, how do you change the resolution accuracy? In other words from say
0-10V full scale for an AI to 0-1V full scale?

Here is the information that you should follow when using DAQ with a Macintosh. I'm not sure whether you are using LabVIEW or some other programming language, so the two main references that you should refer to are the NI-DAQ Software Reference Manual for Macintosh and the LabVIEW Data Acquisition VI Reference Manual. Both of these resources are excellent sources of information and will explain to you anything you need to know about programming DAQ on a Macintosh.
The NI-DAQ Software Reference Manual for Macintosh can tell you how to configure things such as Analog Input Mode (differential, RSE, NRSE), Range, Polarity, Analog Output Range, P
olarity, Voltage Source, etc. Even reading just the first chapters of either of the above mentioned reference manuals should have you on your way.
Hope this helps.
Jared A

How do I change the default settings on ical

how do I change the default settings on ical - I upgraded to Lion and now every event is automatically clicked as an "all day" and when I unclick the "all day" it gives me an 8 hour window for my event instead of the 1 hour that I prefer! Help!

Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
You can only assign one default application to one type of document.

How do you change the default setting in the motions tab?

Greetings!
We have two macs in our editing suite. Both are running FCP studio 2. One of the macs has a default setting for the drop shadow of 2 in the motion tab. The other mac has the default setting of 10. How can I change the default settings (not as a favorite) so that when I open a clip in the viewer the default setting will always be my preference (1.5) instead of the standard 10. I also want to change the opacity to 90% as the default.
Thanks for your help.
YmirJr

Larry, et.al.
Below is a step-by-step process for changing the default font in CS6, Illustrator, Mac, Mountain Lion, 10.8.2.
There are several additiional steps needed to make this work.
Please feel free to us this for other inquiries.
To Change Default Font in CS6-Ai-Mac-Mountain Lion, 10.8.2
On desktop menu bar, hold down Option key, go to GO, pull down to Library.
Open Application Support, ~ Adobe, ~ Adobe Illustrator CS6, ~ en_us ~ New Document Profiles
Six choices appear (you can change each that you use, one at a time)
Example: Double click Basic RGB.ai
A Basic RGB.ai blank document window opens
In Menu Bar, go to Window ~ Type ~ Character Styles
A sub-window opens with (Normal Character Style) highlighted in Blue
Double click the highlighted name and another sub-window opens
In left of this window, choose Basic Character Formats
Change to desired Font Family, Font Style, Size, etc.
Click OK when finished, widow disappears to reveal Character Styles sub-window
Click anywhere on the blank document in order to get option to Save
Save the document
Close Character Styles sub-window
Quit Illustrator
Re-launch Illustrator CS6 ~ New document … check Font tool to confirm changed default font
Hope this works for other "Lost Adobe Souls" like myself.
George

How do you change the timeline duration in Photoshop CC?

There seems to be 5 second limit on the duration of the timeline in Photoshop version 2014.
How can you extend the duration of the animation? There's a timeline window, but no "animation" window as mentioned in many of the help files.
How do you change the duration in Photoshop 2014?
I'm using Windows 8.1 as my OS.
Thanks.

Thanks for the reply, but my point was not about the lack of creating animations.
It seems that in Photoshop CC, you cannot change the duration of the timeline unless you click on the end of a clip and drag it out which will then give you more time. As the original post mentioned, you automatically get a 5 second duration unless you have a video clip that is of longer time. This all makes sense for videos, I understand that nobody (usually) wants to stretch video. Video by nature will extend the timeline based on how much footage is present.
Now take an animation scenario where you want to create something from scratch that spans longer than the default 5 seconds. There is no option!!! No document settings, nothing that will allow you to extend the timeline. I now have to click and drag each layer clip on the timeline to give it more time for the animation, one by one might I add (you can't even highlight multiple clips and extend them all at once, which is crazy).
So what does this mean? Well if you create a mockup of something with all of these intricate layers including backgrounds, copy etc. and you only intended to animate a certain piece for say 8 seconds, you'll have to extend each and every single layer clip in the timeline otherwise they will magically disappear and the only thing displaying is that which you have extended manually.
The reason why you need a document settings in the timeline is to prevent content from disappearing if something extends for a certain amount of time.
Frame by frame animations only allow for so much functionality, try to animate multiple objects at once with frames and go back and make a change to one part...
CS5 would simply show everything regardless if they did nothing on the timeline, it allowed you to see all of your elements present.
Again, I stand by my statement saying that the new timeline is flawed.

How do you change the language in iPad Pages?

How do you change the language in iPad Pages? I tried lookin for it but I can't find it.

What a lot of confusion in this discussion!
The language of a text is a property of the text itself. If the keyboard or the language of the OS of the computer is changes afterwards, the language of the text remains what it was.
Only at the moment when text is typed the keyboard settings may be used to identify the language. If you are able to imagine a text composed of sentences in different languages you should be able to understand this.
Changing the keyboard in order to change the spellckeck only works at the moment of typing. With texts written earlier it is meaningless.
When I import a document written in German on my Mac to my iPhone and iPad, Pages on iPhone and iPad do niot recognise that the text is German. The spelling checker underlines everything. And what people complain about here is that we do not find the place where to tell Pages that the existing, imported text is written in a certain language.
Please stop mixing this up with keyboard issues!

How do you change the document settings of an alternate layout?

Similar Messages

Maybe you are looking for