How Do You Change the Icons / Change Multiple Icons?

I've learned that to change most icons on the Mac is Getting the icon you want to change, and the icon you are changing it with. You select "Get Info" by holding "ctrl" and clicking on each icon. Then You click on the icon on the top left of the "Get Info" window. This highlights the icon, and now you can Copy it. Now you click on the icon in the other info window, and paste the icon on top of the former.
But
*How Do You Change Icons Such As the Garbage Icon?*
*Is There a Way to Change All Folder Icons At Once?*
i.e. To change the default blue folder icon, to another icon, and make it stick until that preference/setting is reset. And also have it set so the the new icon will appear when I "create a new folder."
Anything is very much appreciated.

Duplicate the audio once editing is done. In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other. Then adjust the mixer appropriately.

Similar Messages

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you edit the duration of multiple still images?

FCP X has a default duration for still images when you import them. After importing, how can I edit the duration of multiple clips?
I've tried selecting them all, control-click and change duration, but nothing changes.
BTW I want to make them 5 frames each...
thanks for any help
Craig

Thanks Tom, I've tried that. and nothing happens.
I presume that I type the 5 in the number sequence thing above the timeline?

How do you make the date change for every entry when inserting.

Hello, I am making a daily vehicle inspection report for my truck and I would like to make a 7 day calendar but I would like to insert the date ie Monday Feb 22, 2010, Tuesday Feb 23, 2010 etc...and have it change for each day of the week. is there a way to do this? Also can you put an outline or a box around the 6 lines of text that you input.
Thank you
Ottoman

Jerrold Green1 wrote:
Ottoman,
As Peter says, you can use a Table for this. You do not, however, need to enter two dates to fill with a series of dates. Dates are an exception to the general Fill rule. Just enter one, and fill down to get successive dates.
Other exception available:
a single cell is sufficient for every entries ending with a number :
president1
thief2
king3
behave this way.
Durations behave like numbers : two cells are required.
Yvan KOENIG (VALLAURIS, France) samedi 27 février 2010 18:20:29

How do you control the volume of multiple audio tracks

Hi
I have about eight tracks of audio in my Finalcut timeline. When played, sometimes the music track will be much louder than the narration track or the FXs track will be louder than the all tracks.
How do I lower or raise the volume of tracks so that the track that needs to heard is heard.
I dont want to do an all out mix yet. I'm just building tracks
Thanks

Select all of your audio, go to the Modify > Audio > Apply Audio Normalization. It will bring all clips in each track to be the same level. Then, later, you can do your final mix much easier.
Or go to Window > Arrange > Audio Mixing and you'll have an on-screen mixing board to work with. There's a speaker icon in the top right, green keyframing is on while you mix in realtime during playback, gray, keyframing is off.
But use the first method first, for sure. Open the audio mixer after that, you'll save yourself a ton of work and time.
Message was edited by: BenB

Hey, this is a question that a few lingering google searchers have been stumped with.....How do you get the mourse cursor arrow icon that is white, to fade or disappear while watching iTunes visualizer?

I like having thw whole screen background black for the cool visualizer....

After a little more research in this forum, I found another user reporting the exact same problem... solved by downloading the Perian component for Quicktime. I downloaded Perian and it worked great! Problem solved.
Kudos and thanks to the users in this forum.

How can I change the length of multiple lines at the same time?

This just seems like it should be a no-brainer, but obviously for me it isn't. I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4. Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines). Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch? It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
Thanks for any help you can give!

OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
"If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help!

How can I change the font to multiple titles at the same time?

Hey guys, quick question. I have a bunch of titles and lower thirds in my project and my producer decided that he didn't like the font we were previously using and wants to change it to a new one. He seems to do that pretty often. Is there a way to "globally" change the font to multiple title cards at the same time instead of clicking on each one separately and doing it manually for each one? And if there is no way to do that does anyone have any ideas on how to make it easier?

If you have any idea of design and fonts you would understand that "Title Cards" are not "exactly the same" if you change the font... because all fonts are not equal! Lower thirds are probably even more restrictive because they have design elements in them.
If you work with "change their mind producers"...the deal that goes with that is suck up their changes. (on a salary or otherwise)
I was just saying there is no way without scripting ..to change a title ( graphic) en masse ( in Premiere) and get it working because of font differences.

How do I change the length of multiple photo's after I've added them?

How do I change the length of multiple photo's after I've added them?

Hey,
The best way to do this is to select all the clips by holding down the shift key or command key if the clips you want to change are not all right next to each other and then selecting each clip that you want to change. Then double-click on the clips which will open up the inspector tab and then you can change the duration. If you want to just change all clips to the same duration just double-click on one of the photos and in the inspector tab next to the durationt tab you will see a box that says "add duration to all clips". If you click that, when you change the duration all the photos will change to that duration. That will then change the duration of all the clips at the same time.

How do I change the font of desktop icons?

How do I change the font of desktop icons?

OS X only permits changing the font size but not the font itself. There are third-party interface modifiers that may enable you to make more extensive changes, but since the basic system fonts are embedded they are not easily changed. The freeware tool, TinkerTool, can be used to make some font changes, but icon fonts. Look for it and other software at VersionTracker or MacUpdate.

Why can't you change the .html/.htm filetype icons for Firefox?

**Before you read this question: NOTICE I am talking about Firefox Icons on Windows, NOT ON FIREFOX BOOKMARKS/PROGRAM!!!!! Read the question then please, please visit the link so you have a better understanding of what I'm asking with this question!!!!**
I've been trying to change the FileType Icons for the Firefox Documents for weeks now and there's no solution that I can see. I tried using Filetypes Manager to change the .html/.htm filetypes icons with no luck. Why does Firefox force this change on users when most users that use Firefox do so because of it's ability to be customizable? Even Microsoft Word .doc file icons allow you to change them! Microsoft!!! Why is Firefox forcing everyone to use their ugly filetype icons? &____& I've yet to see this issue not only addressed but solved. Why does Firefox ignore this issue? I'd like my computer's icons to all be top-notch, and Firefox is preventing me from making my weeks of hard work go to naught. Please, please address this issue... if anything, tell your users why your program is forcing the icons on them in the first place when monopolies like Microsoft allow their users to customize program filetype icons.
If this cannot have a fix, why can't it be a new feature/addition to the newest versions of Firefox?
Edit: And because people are starting to get 'confused' I've included a screen shot of what I'm talking about because, for the love of god, people, I'm *not* talking about using favicons and bookmarks!
http://i28.photobucket.com/albums/c231/arcanetheorem/example.png

The only thing I changed about the question was to add an image and to try and make it more understandable since everyone assumed I was talking about Favicons/Bookmark Icons....
As for it being a Windows 7 issue and not a Firefox one... if it were just a Windows 7 issue I wouldn't be able to change other application icons or filetype icons on the Windows platform using FileTypes Manager. Firefox, from what I've been able to gather, is not one that can be changed. If I change the filetype icons for Word Documents any other extension (like .mp3/.mp4/.avi/.mkv), I get the changed icon I wanted. However, when you try to change the Firefox .html/.htm filetype extension icons, it doesn't work. Have you tried going through changing your icon filetypes using FileTypes Manager to see this issue? If it were a Windows or FileType Manager issue, then I'd have trouble changing other icons on that platform, no? So what I'm asking with my question is why this is. Why, if you use FileTypes Manager to change Windows7 icons, is Firefox's icons the only ones that won't be changed? Doesn't this fall under Firefox's problem if their icons are under the 'can't be changed' category under Windows? And using shortcut icons is no good for me. When I browse a folder of .html files, I want to see the icons I changed it to, not make a shortcut to every .html file I have just to have a better-looking Visual Style. Defeats the purpose, doesn't it? As for clicking on Properties to change it... Windows 7 doesn't allow this feature anymore, which is why I've been using FileType Manager to change all filetype extension icons.
Hope that helps clear things up a bit, though I have a feeling I'm just confusing everyone more with what is a simple question/problem....

Changing SSL Cert, how do you update the trust profile for devices.

I am in the process of changing out the ssl cert for the trust profile (going from a self-signed to a signed cert). How do you update the trust profile on the devices already paired with the server.

Yes, the linked smart object can be either raster or vector, but they will be placed as raster images, just as the embedded SO are. SO can be embedded or linked to an outside file. Edits to the original will not update in the original until you select "Update modified content from the menu" when you reopen the file that has the place SO in it. otherwise it will update when you save the linked file. Yes, there still is an advantage to having an embedded SO. You may not want to maintain the links - send a file off and forget to include the linked files. You may want to alter the SO, but not the original file.
Ah, thanks. But does this mean that raster and vector smart objects can EITHER be located within the Photoshop file (as they have been since their advent) OR linked to an external file?
And if so,
1. Can this linked file be either raster or vector?
2. Do edits to it automatically update the Photoshop file?
3. Is ther any longer any advantage to having the smart object data stored within the Photoshop file when it can be linked?

How to change the design of multiple-choice checkboxes

Hello,
i want to change the look of multiple-choice quizzes. Instead of the typical checkbox with checkmark i would like to place a button that changes its color - for example blue for right (activated) and white for wrong (not selected).
I think it should be possible, but I don't know where I can change the look of checkboxes. I Tried it with a hotspot-quiz, but that is not exactly what I'm searching for.
The best solution for me would be a kind of button with mouse-over effect as known from websites (HTML).
Can you please tell me what I have to edit?
Thank you very much.
Boris

Hello and thank you for posting this information. I'm still seeing a number of problems with implementing a workable solution.
For HTML5 only (not Flash), I have changed the image: HTML/assets/htmlimages/checkBox_selected.png to a blue button (118x53 pixels instead of the default 22x22pixels), and as expected the button will still be the same size until I change the code description of the checkbox. I found the CSS description of the checkbox button in: HTML/assets/css/CPQuiz.css and have made the changes to the width and height (see below), and even though the following changes are generated in the output files, they don't have any effect on the button. However, I found that if I changed the 'Project.js' file where it defines the width and height of the checkboxes that this would actually change the values, but this is always re-written over and generated each time you click 'Publish'.
So, I then found some hard-coding in the file: HTML/assets/js/CPLibrary.js (just search for 22px and you'll see that the checkbox description width and height are not being read from the CSS file) and this appears to be where the actual code is coming from that gets generated for output when you click on 'Publish'.
This is not an optimal solution, I feel that I'm beginning to hack around the default code for Adobe Captivate more than I should be expected to do. Is this really what others are doing to make what should be pretty simple and easy changes?
Additionally, I noticed that when I click on my checkbox, the 'checkBox_selected.png' will be drawn, but if I click on it again the 'checkBox_disabled.png' appears to be drawn on top of the previous 'checkBox_selected.png' which is not the behavior I would expect. I want to be able to see what is underneath the button if I click on it again in order to un-check the box and instead it draws the 'checkBox_disabled.png' on top, covering up the default text I need to see!
Below are my changes to CPQuiz.css (which were copied to the 'Published' file, but had no visible effect)
input[type=checkbox]:checked
    background: url('../htmlimages/checkBox_selected.png') no-repeat center center;
    -webkit-appearance: none;
    border: none;
    -webkit-background-size: 118px 53px;
.spanCheckBoxInput
    position: fixed;
    display: block;
    width:118px;
    height:53px;

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English.
[email protected]

'''''What''''' webpage do you have set as your homepage? <br />
Are you saving cookies for that page?

Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

Hi DOC808HI
# I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
# Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
Cheers!
...Roland

How do you reinstal the old google facepage that was changed by firefox.

How do you reinstal the old google facepage? On 8-16-12 firefox asked if i wanted the new google facepage. I don't like it and would like to go back to what I had. How do you go back? My email address is jhubertus890 ''at'' gmail ''dot'' com THANK YOU
'''Moderator edit: De-linked email address to prevent spam.'''

Hi,
Can you also please post the link of the affected page.

How Do You Change the Icons / Change Multiple Icons?

Similar Messages

Maybe you are looking for