How do you change the number of rows returned by an advanced datagrid...Only displays 1000 rows....I
I am using coldfusion to query an oracle table....Query returns approximately 2000 rows, however the max rows the datagrid will display is 1000. Does anybody know how to change this...THANKS!!
Thanks so much for your answer that sounds like a good idea...
I found the answer to my initial problem...In my coldfusion I had set maxrows = 1000. So the datagrid was always returning 1000 records even when a lot more than that should have been returned...When I removed the maxrows parameter in the coldfusion code, my datagrid was now been populated with the correct number of rows...
thanks again for your help,
Ronnie Raigrodski (Aka -- FlexNerd)
Similar Messages
-
How do you change the number of rings before a call goes to voicemail?
How do you change the number of rings before a call goes to voicemail.
You can't; it's set by Verizon at 30 seconds.
-
How do you change the number of rings before FIOS goes to voice mail?
Currently my FIOS residential service picks up voicemail after 4 rings, thereby negating my answering machine on my phone. It is then hit or miss for the system telling me if we have a voice mail. I would prefer to use my phone answering machine
How can I change the number of rings on FIOS to 6-8 more rings, in order for my phone answering machine to pick up?
Thanksrhc86 wrote:
Currently my FIOS residential service picks up voicemail after 4 rings, thereby negating my answering machine on my phone. It is then hit or miss for the system telling me if we have a voice mail. I would prefer to use my phone answering machine
How can I change the number of rings on FIOS to 6-8 more rings, in order for my phone answering machine to pick up?
Thanks
Call your voicemail access phone number and go to settings. There is an option for that. -
TS3899 How do you change the number of emails displayed on ios7?
Since I have upgraded my phone to ios7 my phone doesn't display as many emails as it used to. How do I change the settings so that my phone retains more messages?
You cannot change that, it is not user programmable. That is handled by your carrier, and it is not based on the number of rings, it is based on time. Call your carrier and see if they can extend the time for you. They may not be able to do this.
-
How do you change the Number of Plots Shown property of a Waveform Chart at runtime?
Is there any possible way to change the Number of Plots Shown property
of a Waveform Chart at runtime? Thy Dynamic Stackplots example is
way to limited.....There's a couple of ways to do this -
1. Manage the data going into the chart to only be what you want displayed
2. Use property nodes. Specifically, the Plot.Visible node. (LV 7 example attached).
2006 Ultimate LabVIEW G-eek.
Attachments:
MultiPlots.vi 48 KB -
How do I change the number of significant digits in a slide's digital display?
I suspect I'm missing something really obvious. I want the slide's digital display to show 1.23 instead of 1.23456. Here's what I tried:
1. Drop a Horizontal Pointer Slide
2. Make its Digital Display visible
3. Type 1.23456 into that display
4. Pop up on the Digital Display and select "Display Format..."
5. Change the number of significant digits to 3 and hit "OK"
The digital display still shows 1.23456. What am I missing?
Solved!
Go to Solution.LOL - I had the same problem. Hidden in plain sight! All I saw was Numeric, and thought "Duh! Of course it's numeric - it's a slider!"
I do think NI could do a much better job on this, perhaps with more informative labelling. Slider Scaling or Scale Format might be better. Also, since one can select the Digital Display by itself on the front panel, one should be taken directly to the digital display formatting when Properties is selected, instead of still having to change the dropdown. By selecting the digital display instaead of the slider, you're implying that you want to change its format only. -
How do you change the number of rings before going to voicemail on ios7
my phone only rings for like 4 rings then goes to voicemail I need it longer help!?!?
You cannot change that, it is not user programmable. That is handled by your carrier, and it is not based on the number of rings, it is based on time. Call your carrier and see if they can extend the time for you. They may not be able to do this.
-
How do you change the number of processes in XE
Processes are set to 40 in XE, how do i change this?
SYS@XE SQL> alter system set processes=<new value> scope=spfile;and restart the DB.
-
How do you change the number of rings before voicemail is activated on an iPhone 5?
Thank You
I don't believe it is possible to change the time between dialing and when it switches to voicemail.
-
How do you change the location of a small image within an IMAQ image display?
I have an image that exactly fills the display. But then I want to extract a portion of the image and display that small piece, but have it be in the same location as it was before, not centered in the display (essentially I want to crop the image but leave it in the same location). I tried the 'Image Center Position' property node for the image display, but is resets itself to the center of the display. Can anyone offer any suggestions?
Thanks,
Marty
Attachments:
Crop_Pic_Test.vi 102 KBMarty_M wrote:
I have an image that exactly fills the display. But then I want to extract a portion of the image and display that small piece, but have it be in the same location as it was before, not centered in the display (essentially I want to crop the image but leave it in the same location). I tried the 'Image Center Position' property node for the image display, but is resets itself to the center of the display. Can anyone offer any suggestions?
You misused the Image Center position property : it works only on images larger than the display area. Have a look at the simplified version of your sample vi.
One way to achieve your objective will be to create a black (or white) background image, with the same size as the original image and to paste the small piece over this BG.
Happy New Wires
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Crop_Pic_Test[2].zip 22 KB -
How do you regulate the number of emails that are kept on your phone before they are deleted?
HOW DO YOU CHANGE THE NUMBER OF EMAILS THAT ARE KEPT ON YOUR PHONE BEFORE YOU DELETE THEM?
Your carrier sets this by time, not the number of "rings" since different ring tones take different times/ring. The typical setting is 30 seconds, sometimes up to 40 seconds. Contact your carrier to shorten it.
-
In i photo11,how do I change the number of thumbnails in the rows?
In I photo 11, how do I change the number of thumbnails in the rows? I now have 5 large thumbs across, but
I would like to have 10 or 12 normal sized thumbnails in each of the rows. Thankstab --
Here's where to read up on your question.
If you don't find your answer, post a new topic there:
https://discussions.apple.com/community/ilife/iphoto -
How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?
After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
How do you change the phone number on an ipad mini in the imessage settings?
How do you change the phone number on an ipad mini in the imessage settings?
The Phone number of a Cellular iPad is assigned by the carrier the iPad is connected to. Usually changing the sim card will change this number.
If that is not what you mean can you please explain in more detail -
How do you change the background color of certain rows in a Datagrid?
How do you change the background color of certain rows in a
Datagrid?Hee is a great example:
http://www.cflex.net/showfiledetails.cfm?ChannelID=1&Object=File&objectID=487
Tracy
Maybe you are looking for
-
How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1 A senior citizen needs some help. Thank
-
A wierd error of JDBC Receiver adapter
Dear Expert, I got stuck by the JDBC receiver adapter with PI 7.11, the log is 'JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'SYSTEM'): java.lan
-
Airport Extreme (cone) & Dial Up - Which is the better ISP?
Hello everyone, and thank you for reading this post. I'm in a situation where I'm away from my glorious broadband, and stuck with only a phone jack several days a week. My only option is dial-up. I've ordered an AEBS with the built in modem, and I wa
-
Hello all, does anyone know a good framework or library for mapping XML data to Java classes at runtime (JAXB is not an option, since you have to recompile)? Many thanks in advance.
-
I am unable to view my In Box. Says Cannot Load Mail.
I rang the helpline who tried changing my password and then said they didn't know! I have been using icloud for over a month and was actually viewing my In Box when it froze. I can send e'mails to my account, just can't read them. Every time a box co