How do you change the size of the font in iMessage?

How do you change the size of the font in iMessage?

I'VE DONE IT!
I found 2 little boxes floating outside of each of the englarge pasteboards.
i foudn them using select all, and then deleting the boxes.
FINALLY! Thanks for all your help though Hopefully this will help someone else!

Similar Messages

  • How do you change image size in the title window?

    I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case.  When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

    Thank you again for responding Hunt. I did find out what what was happening.
    I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
    I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
    Terry Lee Martin
    Date: Mon, 17 Aug 2009 16:04:16 -0600
    From: [email protected]
    To: [email protected]
    Subject: how do you change image size in the title window?
    Welcome to the forum.
    That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
    What happens if you choose Title>New Title>Default Still?
    Good luck,
    Hunt
    >

  • How do you change your password in the new BT Mail

    I have 3 email addresses (master and two sub accounts) which I like to change the passwords on from time to time. From within BT Mail I am unable to find an option to change the password. There is a link to Manage your emails which takes you to My BT. When I enter My BT and enter the Manage BT mail I am presented with a list of my emails. One of them shows an option to change password, the other two have option to add to BT ID. I tried adding these to BT ID but get an error message telling me that this can't be done. I then contacted BT support, big mistake, after the support tech took over my machine and subsequently began changing passwords on accounts I lost access to my emal and My BT. I have now got access to all areas again but the passwords on the two sub accounts are the passwords that the tech put in there, hardly secure? Anybody know how to change the passwords if sub accounts are not linked to your BT ID?
    Solved!
    Go to Solution.

    It appears flytothemoon found a work around for part of this problem below. I have to say this is another large oversight for BT and their email providing partners. Did anyone actually test the new system before it was rolled out?

  • How do you change your email in the mail app on macbook air

    Anybody know how I can change my email under my mail app on my macbook air? I accidentally wrote in wrong email

    Hello there, KaelahKirstan.
    The following Knowledge Base article reviews the steps for removing and adding accounts in the Mail application on your Mac:
    Mail (Yosemite): Set up Mail with your email accounts
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do you change a belt on the HP Designjet T610?

    I can see that the belt is frayed and won't let the carriage move.  I don't have a problem getting into the machine to fix it, I was just wondering is anyone else had changed out one before. 

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Designjet board here:
    http://h30499.www3.hp.com/t5/Printers-Designjet-Large-Format/bd-p/bsc-414
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do you change network settings at the command line when they were set in the

    Ubuntu server setup in a remote location awhile ago, with GUI packages. Currently at
    version 14.04 LTS. There is ssh access to the remote server.
    After a lot of digging thru typical command line configs and not finding the existing
    settings anywhere, it appears the only way to update existing settings -- DNS
    name servers, IP's, etc. -- is using a GUI method, such as gsettings or unity-control-center.
    However,
    gsettings doesn't appear to have those particular items.
    Is
    the only option to use a remote version of Unity .... or just get someone
    on-site and remedy this thru the GUI?
    This topic first appeared in the Spiceworks Community

    Hi and thanks for your reply,
    I used one mini DV Tape for my footage and captured the whole thing into CS6 in one go and so the capture should have been the same throught all of the film. Once I had edited the tape on to the timeline some of the clips are 16.9 widescreen and others are 4.3 standard.
    Help!!!!!

  • How Do You Change the Icons / Change Multiple Icons?

    I've learned that to change most icons on the Mac is Getting the icon you want to change, and the icon you are changing it with. You select "Get Info" by holding "ctrl" and clicking on each icon. Then You click on the icon on the top left of the "Get Info" window. This highlights the icon, and now you can Copy it. Now you click on the icon in the other info window, and paste the icon on top of the former.
    But
    *How Do You Change Icons Such As the Garbage Icon?*
    *Is There a Way to Change All Folder Icons At Once?*
    i.e. To change the default blue folder icon, to another icon, and make it stick until that preference/setting is reset. And also have it set so the the new icon will appear when I "create a new folder."
    Anything is very much appreciated.

    Duplicate the audio once editing is done.  In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other.  Then adjust the mixer appropriately.

  • How do you change the variable screen on Portal to show Key?

    Hi All,
    I have a report on our Portal.  In the variable screen, the users are asked to optionally enter Cost Centre.  When they choose to select values (pressing the button on the right) the singles values which are shown are 'Text' only.  I know in analyser, the user can switch by selecting the spanner icon - 'Display Key/Text'
    How do you change to Key within the variable screen on the portal?
    Many Thanks
    Michelle

    Thank you for your reply Amrita,
    The display in the query had been set to Text & Key as follows
    Properties of Cost Centre -> Display Tab -> Value Display Section -> Display As 'Text and Key', Text View 'Standard' and Use Characteristic Setting 'Unticked'
    Is there another section that I should be amending to ensure the 'Key' also appears in the variable screen?
    Many Thanks,
    Michelle

  • How do you change your thumbprint for iPhone 5s?

    How do you change your thumbprint for the iphone 5s?

    Go to Settings > General > Touch ID & Passcode, enter your passcode, then Turn Passcode Off will delete all current fingerprints. You can then turn passcode back on and enter fingerprints.
    Rather than deleting, you can also add the same fingerprint a second time via "Add a fingerprint" in Settings > General > Touch ID & Passcode, enter your passcode, then Touch ID.

  • SL3100: How do you change ear cushio

    Recei'ved my SL300 today and just trying them out/ flipping through the manual and somehow the picture describing how to change ear cushions is a bit....lacking.
    So i ask, how, do you change ear cushions on the SL300?
    Thank you in advancement.

    Very simply. Pull the cushion away from the plastic. Then push the new ones back on the plastic. Notice the little lip on the back side of cushion. Very, very easy.

  • How do you change the default size of the print batch size for mail merge in Publisher 2010?

    I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
    the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
    suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
    prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
    pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
    2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

    It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

  • How do you change the size of pictures?

    Hello,
    I'm a new Mac user. How do you change the size of pictures in iPhoto? Sometimes when sending e-mails, the picture files are extremely large and take a long time to load... Is there any way you can make the picture or file smaller? Like on a PC, you can open the photo in the Paint program and just reduce the size... Is there anything like this for the Mac?
    Thanks!

    Assuming that you're accessing your email package from INSIDE iPhoto, you're given a choice of picture sizes. Personally, I've found "medium" to be a good compromise but you might prefer "small" (iPhoto will tell you the file size).
    If you don't know what I'm talking about, first go iPhoto Preferences > General and select your email client. Then, go to the View menu and select Show in Toolbar > Email.

  • How do you change the ont size

    How do you change the font size for one word ?

    Basically, you need to wrap the word in a <span> tag, and apply either a class or an inline style to the span. Using a class is better because you can reuse it in other pages, or other parts of the same page. Also, changing the font size in the class will apply the changes to all instances of the class. With an inline style, you have to change each one individually.
    To wrap a word in a <span> tag, select the word, then press Ctrl+T (Cmd+T on a Mac) to bring up the Wrap Tag dialog. Type "sp" (without the quotes), and press Enter twice. Then create a class using the CSS Designer. Apply the class to the word by selecting it again, and select the class from the Class drop-down menu in the Property inspector.
    To create an inline style, select the word, and click the CSS button on the left of the Property inspector. Select the font size you want from the Size drop-down menu. If the size you want isn't listed, just type the value in the Size field.

  • HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP

    HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
    How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %

    I don't know if there is a way to set this. Some user's may prefer different sizes of window, depending on their job duties. For example, we have 170 Systems document management integrated with purchasing and payables so users shrink the Oracle window to fill about 60% of the screen while 170 uses the remaining 40% to display the scanned document.

  • How do you change the font size?

    This is a rather simple question.
    How do you change the font size in flex builder 2?
    In the preferences for flex>editors there is no option to
    change any font settings.
    i'm sitting quite far away from my LCD and can hardly make
    out the text.

    Window -> Preferences -> General ->Colors and
    fonts

  • How do you change the size of the font in the menu bar running Maverick?

    On Maverick, how do you change the size of the menu bar font?

    Sent my feedback already:
    Thank you for your feedback on the MacBook Pro.
    We cannot respond to you personally, but please know that your message has been received and will be reviewed by the MacBook Pro Team. If we need to follow up with you on your ideas for improving the MacBook Pro, we will contact you directly.
    We appreciate your assistance in making the MacBook Pro a great computer.
    MacBook Pro Team
    Apple

Maybe you are looking for