How do you Change the Tick Resolution?

How do I change the quarter-note tick value? Like quarter note = 120, 240, or 480 ticks. Is there a global setting somewhere for that? Thanks!
~trevor

Here's my workaround for non-destructive sample-accurate audio editing in the arrange window:
Create a seperate region containing the edits you wish to make. (the smaller, the better.) Bounce this region to a new audio file. Open a new logic song. Before importing, change the tempo to 9999.0000, the meter to 4/1, and the division to 192. This results in a resolution of 31,996.8 ticks per second. Not quite 44.1, but enough to edit frequencies up to 16 kHz.
Depending on the length of the region, you may want to increase the length of the song to 536 measures, the longest at this meter. This gives you a maximum region length of just over 51 seconds. Set your Snap to ticks. Then, make you track settings, import, and snip away.
This gives you some undo and crossfades so you can audition and re-do your precise edits. When you are finished, bounce and re-import to your original song and replace the original region.
Note: On my system, I have about 5 seconds of playback before I get an error message relating to synchronizing audio and MIDI, but it's enough to audition the edit/fade.

Similar Messages

How do you change the Screen Resolution?

I can not figure out how to change the resolution on my screen. Everything is much smaller than what i would like and would like to enlarge everything. There is a simple way of doing this with a PC but i have not been able to figure it out on a macbook pro.

Go to System Preferences (under the Apple menu) and click on the Displays pane. If your machine is set for "Best for Display" tick the "Scaled" button and mess around with the different resolutions until you find one to your liking.
Good luck,
Clinton

HOW DO YOU CHANGE THE RESOLUTION TO A HIGHER SETTING

How do you change the resolution to a higher setting with a macbook pro?

hey
this is nice post acctually i was looking for the same..
thanks for sharing...

How do I change the printer resolution?

How do I change the printer resolution on my OSX 10.6.2 laptop?
I have an ubuntu print server and it seems to only work at all using the gutenprint drivers. On my ubuntu client I had to change the print resolution from "auto" to 600x600 to make it work just fine.
The best I can do is make the Mac print pages squished down to 1/4 size. I don't see the same resolution option on the Mac.
Mac OSX 10.6.2
Ubuntu Server 9.10
Printer: Canon S900
Cups driver: Canon S800 Gutenprint v5.2.3
Cups version 1.4.2 on the mac
Cups version 1.3.9 on Ubuntu Server
Macbook Pro Mac OS X (10.6.2)

I can't speak for the printer directly, but most functions to change resolution are in the dropdown menu at the bottom of the print dialog. It has a gray bar running through it separating the basic functions from the advanced settings.
If you don't see that, but do see a blue button with a black triangle pointing down, click on that. Then you'll be able to set the advanced settings.
Once you set up the printer the way you like, save it as a preset. If you want that as a default, see this [MacOSXHint|http://www.macosxhints.com/article.php?story=20100125135830153].

How do you change the nominal range settings from 0-10v to 0-1v

Currently using a PCI-6052E with Mac OS, how do you change the resolution accuracy? In other words from say
0-10V full scale for an AI to 0-1V full scale?

Here is the information that you should follow when using DAQ with a Macintosh. I'm not sure whether you are using LabVIEW or some other programming language, so the two main references that you should refer to are the NI-DAQ Software Reference Manual for Macintosh and the LabVIEW Data Acquisition VI Reference Manual. Both of these resources are excellent sources of information and will explain to you anything you need to know about programming DAQ on a Macintosh.
The NI-DAQ Software Reference Manual for Macintosh can tell you how to configure things such as Analog Input Mode (differential, RSE, NRSE), Range, Polarity, Analog Output Range, P
olarity, Voltage Source, etc. Even reading just the first chapters of either of the above mentioned reference manuals should have you on your way.
Hope this helps.
Jared A

How can you change the display size on the task bar

how do you change the display size on the task bar

If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
You can change the as-viewed size of that temporarily by using either -
• Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
• Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

HT5312 How do you change the email address used to send security answers?

How do you change the email used to send the security answers you have forgotten? I have changed the alternative email adress in Name, ID and Email Addresses but this does not change the email address in the Password and Security section.

Jus what do you want to accomplish? The Apple ID email address is used for variosu thing onthe iPod like:
- For purchasing media. Srrings.iTunes and App stores. Sing out and sign into anoterh account
- Settings>iCLoudl for iCloud account
- Settings>FaceRome for Apple ID and where You can Be Reached At email address
- Settings>Messages for Send And Receive email address.
- Maybe for Game Center

Same question for the "2 iPhones in one account".....How do I change the name. My iPhone is showing my wife's iPhone name when I am syncing it. Why is that? I know about using one iTunes account....But how do you change the name w/o erasing your data?

Hi....How do you change the name? When I sync my iPhone, it shows my wife's name on it?

Unfortunately it is not doing it....
Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update.

HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

See https://discussions.apple.com/message/19218571#19218571.

How do you change the Apple ID for my iPhone 4?

How do you change the Apple ID for my iPhone 4. I am able to access my iTunes account using my new ID and password on my computer; however, my iphone has a different Apple ID and I do not have cannot access iTunes on this phone.

Also, if you have iCloud, you will probably also want to change the iCloud account on the phone to be yours:
Settings>iCloud - if Account is not yours, go to the bottom and Delete Account. Then sign back on with your iCloud account info.
Cheers,
GB

How do you change the pink highlight for the present day in calendar when in week view

How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

How do you change the color of events on ICal.

How do you changed the color of events on ICal? I was able to do this when I utilized ICal on the Snow Leopard system but can no longer do this with Lion.
I know that I can select the Calanders list, but when I create a new "Calander" it doesn't allow me to choose a color and it doesn't show up in my list when working within an event.
Thanks!

Phoebe,
Right-click on the new calendar and select "Get Info."
Make sure that the ✓ mark is selected.
Then choose the color from this pane:

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong and the password is also wrong. HELP

Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.

How do you change the default size of the print batch size for mail merge in Publisher 2010?

I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

With IOS 7.0 How do you change the Color Red, that shows up on the Calendar to another color? People with certain eye problems cannot tolerate the color Red.

How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.

Sorry but you cant

How do you Change the Tick Resolution?

Similar Messages

Maybe you are looking for