How do you change the time signature in Ultrabeat? I want to record something in 3/4. Thanks

Hello,
     I want to record a song in 3/4 using Ultrabeat. I can't figure out how to change the time signature in Ultrabeat. Any ideas?
Thank you,
                    Evereman

Hi
You need to take into account the Resolution (how big is each step) and the number of steps (the Length)
For example, with a resolution of 1/16, one bar of 3/4 would be 12 steps, 2 bars 24, etc
You can set these parameters at the bottom of the UB interface
CCT

Similar Messages

  • How do you change the time of day presets in ical?

    How do you change the time of day presets in ical?  I would like them to be only 1 hour difference, with the preset start times of 10:00 am and end time of 6:00 pm, if I have anything starting after 4:00 pm it also changes the date to the next day.  Incredibly annoying!

    Hi there jenni6,
    It looks like this is possible in the Calender prefernces. Take a look at the article below for more infromation.
    Calendar (Mavericks): General preferences
    http://support.apple.com/kb/PH14994
    -Griff W.

  • How do you change the time on the all day setting in the iCal on an iPhone?

    I updated to ios 7 and when I want to put an all day event in. When I set it for an alert, it will only allow it to go off at 9:00 am. How do I change the time of 9:00?

    rlh264 wrote:
    When I set [an all day event] for an alert, it will only allow it to go off at 9:00 am.
    That is not exactly true.  The default time for the alert is set to the day of the event at 9:00 AM.
    So, there are two points to be made:
    1.  You can change the default time of the alert for an all day event at Settings > Mail, Contacts, Calendars > Default Alert Times > All Day Events.  But those choices are limited, and all occur at 9AM (on some day).
    2.  You can make the event almost (but not quite) an all day event (for example, a 23 hour long event), and then you could edit the event to have much more flexibility about exactly when the alert occurs.

  • How do you change the time of an appointment in the new calendar Monday defaults to 10am tuesday one minute past and sunday 1 minute before

    Installed Ios 7 and new calendar does not allow me to change the time of appointments .
    Ie Monday 7th October try to put appointment in and gives me 10am day before 9:59am day after 10:01am.

    Wow!
    I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
    If nothing else this totally highlights how complicated BT have managed to make their packages.
    A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

  • How do you change the time zone/time on the iPod nano (6th generation)?

    Hello,
    I recently moved to a new city in another time zone and I am not able to figure out (or find out on forums) how to change the time on my 6th gen iPod nano. It's something I would like to fix because the Fitness application records your activity according to time. Any advice would be great!

    Go to SETTINGS on your iPod Nano 6G.
    From SETTINGS -> GENERAL -> DATE & TIME -> TIME ZONE and select the right zone/location form there.
    Axel F.

  • ¿How do you change the time of all images and do the chroma key effect in ¡Movie 10.0.2?

    I know it's a simple question, but i had ¡Movie '08 and I bought the latest version, and it's really different, so I don't know, if i have like 150 photos (it's an stop-motion) how can I put the same duration? And do the chroma key effect? And I don't know why, all the images have the Ken Burns effect and I don't know how to quit it. Thanks for the help!
    Marcireca

    I solved the same time problem, but now the problem is that when i use the chroma key it automatic uses the blue screen effect, not the gren (wich I want). Please help! Thanks!

  • How do you change the time of an animation?

    Hi,
    Cap 5.5 has changed animations.  They used to be separate objects on the timeline, and now they are part of a background?
    I used to stretch and shrink an animation to change its length just like any other object.  What's the secret now?  How do I shorten an animation slide?
    Chris

    Sorry - I was very unclear.
    I'm actually talking about a full-motion capture, which used to exist on my timeline as a separate object (I thought it was an animation object), and now looks like this:
    I guess that red line there is the full-motion capture - how do I make it for a shorter duration?
    Chris

  • How do you change the time zone for all events?

    I didn't have the correct setting checked for my time zone. It appears that I now have to go back and correct each event. Is that true? It would be impossible since I have over 1,000 events in my calendar.
    Any suggestions? Thanks - Kris

    Go to SETTINGS on your iPod Nano 6G.
    From SETTINGS -> GENERAL -> DATE & TIME -> TIME ZONE and select the right zone/location form there.
    Axel F.

  • How do you change the default size of the print batch size for mail merge in Publisher 2010?

    I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
    the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
    suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
    prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
    pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
    2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

    It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

  • HT2513 How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

    How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

    Jerry,
    Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
    Hey presto, I've got the @ where it should be. Excellent.
    However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
    Very strange. I'll look at other keyboards and see where that gets me.
    Thanks,  Maz

  • How do you change the size of pictures?

    Hello,
    I'm a new Mac user. How do you change the size of pictures in iPhoto? Sometimes when sending e-mails, the picture files are extremely large and take a long time to load... Is there any way you can make the picture or file smaller? Like on a PC, you can open the photo in the Paint program and just reduce the size... Is there anything like this for the Mac?
    Thanks!

    Assuming that you're accessing your email package from INSIDE iPhoto, you're given a choice of picture sizes. Personally, I've found "medium" to be a good compromise but you might prefer "small" (iPhoto will tell you the file size).
    If you don't know what I'm talking about, first go iPhoto Preferences > General and select your email client. Then, go to the View menu and select Show in Toolbar > Email.

  • In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

    In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

    Hi howe.sc,
    When I checked for how signatures in Yosemite work, I found this.
    Mail (Yosemite): Include signatures in messages
    Delete a signature from a message: Select the signature, then press the Delete key.
    Replace a signature in a message: Delete the existing signature, then add a different signature.
    That sounds similar to what you are describing.
    Take care,
    Nubz

  • How do you change the artwork in the new itunes? it won't let me delete it

    how do you change the album artwork in the new iTunes? it won't let me delete the old artwork even when I highlight it

    The new iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
    Delete Artwork
    On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
    Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
    Add Artwork
    Select artwork, press Ctrl+C to copy, tap the centre of the Artwork tab, press Ctrl+V to paste.
    Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
    Or, you can drag & drop to, or sometimes from, the same locations.
    You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
    If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
    If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
    Replace/Remove All Artwork
    The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
    Old Style Get Info Dialog
    Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
    tt2

  • How do you change the color of a MobileMe calendar group?

    How do you change the color of a MobileMe calendar group?

    Are you using MobileMe? If not, the colors do not match unless you implement the rather painful workaround of loading the calendars one at a time, in the order that the iPhone assigns them (red, orange, blue, green, purple).

  • How do you change the shortcut keys for Firefox in Welsh For Mac?

    I'm using Firefox in Welsh on Mac (asking in English to hopefully get more answers), and every time I try to do the shortcut for copy (cmd+C), it hides the window (since Hide in Welsh is Cuddio, the shorcut for that is now Cmd+C). I usually forget this, and proceed with using the shortcut for copy only to anger myself when I realise that I've hidden the window.
    My question is, how do you change the shortcut keys on Firefox so then I can change the Hide shortcut and give Copy the cmd+C shortcut? I'm also using OpenOffice.org in Welsh, and they are using cmd+C for copy and cmd+H for Hide.
    Is there any way that I could do this myself? Its rather annoying for me, and its rather weird to use Cmd+X for Cutting text instead of copying.
    Thanks.

    This could be worth a bug. It shouldn't happen that some shortcut keys get (re)used for other actions and Cmd + C should be considered as one of them.
    You can try to make the change in this file: cy.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Cuddio &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "C"></nowiki></pre>
    English language pack: en-GB.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Hide &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "H"></nowiki></pre>
    You can find the file cy.jar in the chrome folder in the Firefox application folder.<br />
    The file cy.jar is a ZIP archive, so you need a program that can open such an archive and edit the file baseMenuOverlay.dtd.
    I'm not on a Mac, so can't do any testing in this matter. I just downloaded the Welsh (cy.xpi) language pack for Mac and had a look in it.

Maybe you are looking for

  • I can't get the entire context in my box!

    my family has several ipods and an iphone, when i go to itunes to view ANYTHING the main screen runs to the edge and i can't scroll over to access certain tabs. for instance, if i want to make a ringtone the tab to complete the action is to the far r

  • Why is the search field missing in Notes?

    I am not able to locate the search option in Notes on my iPad. where did it go? Thanks

  • Blank Business area

    Hai The issue is IU posting in TC- F.5D & F.5E in quality & production is not matching.It gives correct posting in quality i.e in production server it nulifies the debit & credit balance of adjustment a/c G/L,but there no correspondence IU posting in

  • Delete cost run & reset release for current month

    For our client we have created a new plant while testing this plant user created a material and they have done a cost run in ck11n  with costing varient zv01 but in they released the cost with costing varient ppc1 with this system got inconsistency a

  • Reg IDOC Segments

    Hi All, Could you please anybody assist me, My requirement is to identfying Idoc segment which contains 'Source List' (ME01)information. For example: Segment E1MARAM Contains Material Master data. If anybody knows please assist me. Thanks in advance.