How do you combine audio tracks in quicktime 10.2

Students in my class recorded some voice overs in multipe clips. We want to combine them into one track in quicktime 10.2. However the choice to copy the track is grayed out. How can we combine the tracks into one in quicktime 10.2?
You don't. Use QT 7 Pro or GarageBand instead. (Video editors will also merge multiple audio tracks but they are likely more limited than QT 7 Pro which allows up to 99 data tracks.) GarageBand, also based on older QT 7 Pro technology, allows you to segment tracks, set track or selected track segment volumes to duck track or track segments, adjust or "rubberband" master track volumes, adjust stereo pan for track or selected track segments as well as, "slide" tracks or track segments along the time axis and apply numerous enhancements beyond my ability to even remember here.

Similar Messages

How do you combine audio and video files?

I've brought in a video file and an audio file, but can find no way to specify that they are a single source that should be compressed together. The documentation was of no use. How do you identify video and audio files as being one source?
Thanks!

Semantics, I suppose. In any case, you do need to go through Premiere Pro if you want AME to do the job. There are likely other encoders out there which can perform the muxing, though, if you'd rather not go through PP.

How do you make audio tracks independent?

I need to be able to export my live audio tracks 1+2 and M+E tracks 3+4 to QT AIFF mono files
Problem is even when I unclick the speakers and select just 1+2 tracks I still end up with 3+4 mixed in as well.What am I doing wrong?

Check the Audio Outputs assignment on sequence tracks 3 & 4 as this determines the output and therefore export patching ... to see the output assignment for a given track you can right click on or around the track's track lock or auto select button and view the assignment from the context menu displayed.
Hope it helps
Andy

How do you keep audio tracks connected to a video track?

I mostly keep the audio and video of captured clip together, in synch. When I put a clip on the timeline, the audio tracks become disconnected from the video track. This is happening regularly and I can't get on with the edit. Every time I move a clip, the audio gets separated from the video. I think something is wrong with my setup. How can I set the project up so that the audio tracks stay with the video track until I unlock them?

I am running into another effect which I don't understand.
I select the video of a clip in the timeline. Then I shift click the stereo audio. This connects the audio and video (which I never separated in the first place). Then when I move the video+audio clip, the clip is copied, which I do not want. I must have turned on something that I don't want. Maybe this has something to do with my linking problem. Shift L did not solve the problem yet, but I need to experiment with it more.

How do you change audio track of iMovie?

I looked in Help and didn't find an answer to changing out my audio track. Anyone?

The track number refers to the number it is on the original album that you got it from. You can change it in the playlist you have, but it's going to keep that change you made even for the original cd. You could always burn it (will be on multiple cds), name the cd, and then re-import it. If you want to change the track number, that's probably the easiest way. Or you can go track by track in your playlist and change it, and deal with it being changed with the original cd. There's no other way besides clicking on the first track, right click to "get info" and go through the "info" tab and change them manually, as far as I know. You don't have to constantly click get info, either. After you do the first track, hit next and it will go to the next song.

How do I combine audio tracks in Premiere Elements 7?

My audio cable went bad as I was recording a program on my camcorder. It only recorded one track. Is there a way to combine these two tracks or Copy & paste one track to the other?
Thanks

I think that John pointed you to, and you found, the PrE forum. Just in case, the method will depend.
Do you have one good channel of stereo? Is the other channel good, but empty, or is there noise in it?
If the former, look into the Audio Effect>Fill Left & Fill Right (choose what you need).
In the case of the latter, I'd edit first in an Audio editing program, like Audacity. There are many ways to get the Audio from your AV file into Audacity, but Importing just the Audio is probably the easiest - basically ripping the Audio from the muxed AV file. I believe that Audactiy can do this. I use Adobe Audition, and it does it easily.
Next, you can delete the bad channel, and dupe the good channel, placing it on the other channel. Save_As 48KHz 16-bit PCM/WAV and Import into PrE.
BTW - PrE will combine all Audio onto the Master Track at Export.
Good luck,
Hunt

How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file)

How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file). Also, my client is having a hard time making an omf that Pro Tools can read. The files can not be found by Pro Tools. How do you make an omf that Pro Tools can read?

Multichannel export;
http://strypesinpost.com/2012/11/exporting-multichannel-quicktimes-in-premiere-pro/
When you export the OMF, select Encapulate Files in the Settings window

How to export unmixed audio tracks

I'm trying to export unmixed master edits so I can easily re-edit at a later date, but whenever I try the result is mixed. I thought there was a simple way to pan tracks for export
G4 Powerbook; Sony 1500A Mac OS X (10.4.8)

If you're just trying to export each track to it's
own individual file, here's how to do it:
Go to your Sequence Settings>Audio Outputs
Set the Audio Outputs to the same number as you have
audio tracks (8 tracks, 8 outputs).
Set them to Dual Mono (not stereo).
Save settings, go back to your sequence.
Control Click in the track target area of each
individual audio track. The top item in the
contextual menu is Audio Output. Set each track to
it's own output.
File>Export>Audio to AIFF
Select Channel Grouped
Now you'll get an AIFF for each track in your
sequence.
Thanks. Is there a way to export a audio/video Quicktime with mono tracks 1 & 2?
G4 Powerbook; Sony 1500A Mac OS X (10.4.8)

How do you monitor audio?

I have a few questions about monitoring audio in my fcp/stp projects.
Currently, I have a g5 quad that has an optical toslink output, that I use to connect to the optical in on a good denon home theater receiver (avr 3801). This is how i output my mac's audio. I have two B&W bookshelf speakers as my monitor speakers.
Is this acceptable to use to monitor my sound for my editing projects? I am not doing much music work, mostly just voice track cleanup on my video projects.
How do you connect audio equipment in your setup to monitor audio?
I am thinking of buying an Alesis 12 track multimix firewire mixer, is this a better interface to use and do I route the signal from the multimix to the receiver to get to the speakers, or should I just get powered monitor speakers and connect them to the mixer?
Also, when editing audio, which is mostly dialogue, is there a volume setting I should keep my receiver at and just work the levels in stp to get the volume right? My receiver has a volume level from -60Db to 0 to 18Db. I am worried about setting my project audio to high or too low.

Giving advice such as saying <Your B & W speakers might be good enough for the job, their lineage is as a studio monitor for the BBC. If you paid over $500/pr, and they sound good, then they're probably good enough. You can use them with a mixer hooked-up to your Mac and outputted to the Denon like in your current set-up> is so cool, if that was the case would,nt you think for a quick minute they would be recomended by pro or advertise as nearfield monitor and not hi-fi.
<conveinient to buy active monitors.> that ain't the case active monitors are made for monitor audio interms of listening to frequency that would be imposible to hear on hi-fi speakers which is the opposite of hi-fi which is more colour-full and does'nt give the true sound, also because its self-power and easy to plug and play.
<The playback volume you use is relative. Most of the engineers I've worked with over the past 30 years prefer to listen back at higher volumes> most pro enginineer listen to mix at very low D.B so as to know exactly what there getting, and after crank them up to hear the over-all levels, any engineer that linsten at loud D.B. does that to show off in seeking attention fr. clients making them feel as if the mix or the song is all that, take it outside the studio and its a different story! <listen back at higher volumes than I'm comfortable with,> thats what i have just explain.
<As far as the levels within the track are concerned, that is all done in the software, again per your preferences, and with an eye on the meters.> it would be nice of you to explain what meter are you talking about, and if it was all so easy with eyes on the meter, dont you think every mixing engineer or anyone attempting to mix would all were glasses, meter in sofware aren't the same as the meters in a pro studio, nor is it the same in hardware, also not all meters are the same where as mixing is concern, they are special meters prefreable know as V.U. meters, check below and you'll all get a better understanding of what i have just out-line, before giving wrong advice of monitor audio.
http://johnvestman.com/meter_madness.htm
Fr.BlayZay.

How can you tell what version of Quicktime you have?

How do you determine what version of Quicktime you have on your computer? What version do you need for a new 30G Video iPod? How do you upgrade versions, if necessary?
Thanks in advance for any help.
iPod mini for windows Windows XP

Open a QT document and use the Help menu, where you should see an item labeled (I believe) About Quicktime Player. That should tell you the version running the player.
You need QT Pro and QT 7 to have a preset for iPod video. You probably can use QT 6 if you use these settings in making an mpeg-4 video:
"MPEG-4 video: up to 2.5 mbps, 480x480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats<<
QT 7 is available for download from the Apple site by clicking on
"Quicktime" in the Purple banner above

How do you initialize audio player on iPhone 5s iOS8?

I am trying to use Scan & Translate and Translate Photo but the error message that says "Unable to initialize audio player" comes up and cannot use those apps.
How do you initialize audio player on iPhone 5s iOS 8?

Ddeveloper has not updated their app since July.
THey need to update to be ios 8 compatible.
the popup you are getting is the app failing to work, not a direction for you to follow.

How do you delete duplicate tracks off your playlist?!

How do you delete duplicate tracks off your playlist - everytime I connect my hard-drive it adds another of every single track - argh!!!!
I remember there being a 'delete duplicate tracks' option on a much older version of itunes - is this still available and if not if you opt for the 'consolidate library' option will this automatically save to you computer as I have too much music for my laptops memory capacity! On top of that how can I stop this issue from contantly re-occuring everytime I connect my hard-drive?! Apologies if im being thick here.... xX*laura*Xx

You are doing something wrong, iTunes doesn't add tracks to the library unless you ask it to, so there is a problem somewhere in your workflow which is creating the duplicates. For example, having iTunes set up to "Copy files to the iTunes Media folder when adding to library" and then repeatedly adding in a folder from an external drive would do it.
Once you've worked out how to stop creating new duplicates you can look at the issue of deduping what you already have. See this recent post for some thoughts and a script that may prove useful.
tt2

How do you combine pages from separate PDFs?

How do you combine pages from separate PDF files into one document?

I use Adobe Acrobat for this.

How do you combine 2 iPhoto picture albums?

How do you combine 2 photo albums?
Can you add pictures to a book once you've already started it?

What i did to combine an ablum was to change the album information so it is exactly the same as the one you want to merge it with. i did this and it worked. it has to be exactly the same, word for word. to edit the album information, right-click on the album and click "get info". a Box will appear. click on the 2nd tab to edit info. you can even change the album cover!
*note: this hasn't been tested for music downloaded from the iTunes Store.
Hope This Helps!

How do you combine 3 different itunes libraries from 3 different computers to one computer?

How do you combine 3 different itunes libraries from 3 different computers to 1 computer?
Can you keep it from creating duplicates? These libraries have some duplicates.
How do you deal with duplicates?
I'm talking 50GB.
All computers are authorized.
THANKS for any suggestions.

You can't.
If accounts could be merged, then everybody could merge their accounts with everybody and there would be no need for anyone to buy anything.

How do you combine audio tracks in quicktime 10.2

Similar Messages

Maybe you are looking for