How do you combine two or more different toolbars?

There is wasted space on multiple toolbars that could be utilized better by moving one tool bar's items up to the empty space above. IE Norton's tool bar has 3 / 4 items on it. The Firefox tool bar above has 3 items on it: Most Visited, Getting Started and Firefox Updated with 2/3's of the bar as empty space.
Even the menu toolbar has over half of the toolbar as empty wasted space.
How do you do that? Thanks

You can (temporarily) hide unneeded toolbars via "View > Toolbars"
The bar with Most Visited and Getting Started is the Bookmarks Toolbar and if you open "View > Toolbars > Customize" then you can drag the "Bookmarks Toolbar items" item onto another toolbar (e.g. Menu bar) and hide that now empty Bookmarks toolbar.<br />
Toolbars added by an extension can only be merged onto another toolbar if that extension supports that feature and most extensions do not.

Similar Messages

  • How do you combine two or more movie clips into one movie clip in iMovie '09

    how do you combine two or more movie clips into one movie clip in iMovie '09

    First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
    When finished, use the SHARE menu to share the project.

  • How do I combine two or more pictures into one?

    How do I combine two or more pictures into one?

    I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else.  I wanted to put several photos from a file onto a new blank image.  This is what I did.
    1.  Create a blank page.    File/New/ Blank File.   Put in the size.  I used 8x10.
    2.  Bring the photo  you want to use into Elements as you always do. It will list along the top next to the blank sheet.
    3.  Choose SELECT (top of screen)/ Select All.
    4.  Choose Edit/Copy   or Command "C"
    5.  Click on the Blank File.   Chose Edit/Paste  or Command "V"
    6.  Click on Image/ Transform or Command "T".  There should be a dotted line around your pasted image.  You can then move and adjust the image to how you want it.  When finished, press the check-mark on lower right of photo.
    7.   Repeat this with all the photos you want on the new blank file.
    8.  You will see on lower right of Elements,  the background layer and as many layers as you have photos.  These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible.  This will merge all layers to the background.
    9.  Save as and you are done.

  • Is it possible to combine two or more different apple accounts to one account?

    Is it possible to combine two or more different apple accounts to one account?

    No, you can't combine accounts nor transfer content between accounts - content will remain tied to the account that downloaded it.

  • HT1414 how do you combine two Apple id's?

    I changed email address and now Itunes thinks I am two different people.   How do I combine with apple account and Itune account?

    Yes. You can sync multipl iDevices on the same computer using the same Apple ID. You can each have different configurations of apps, books, music, etc. or have identical configurations. In this way, however, your common data - contacts, mail, calendar will be the same on both iDevices.
    The Apple ID doesn't distinguish one phone from another, only how the phone will sync to a computer. The Apple ID is how iTunes knows to which computer a phone syncs. And, the Apple ID determines who is the registered owner of downloaded and purchased items via iTunes.

  • How do you join two tables from different Oracle schemas using a subquery

    I am trying to join two tables from different Oracle schemas using a subquery. I can extract data from each of the tables without a problem. However, when I combine the select statements using a subquery I get the Oracle error *'ORA-00936: missing expression'*. Since each SELECT statement executes on its own without error I don't understand what is missing. The result set I am trying to get is to match up the LINE_ID from PDTABLE_12_1 in schema DD_12809 with the MAT_DESCRIPTION from table PDTABLE_201 in schema RA_12809.
    The query is as follows:
    sql = "SELECT [DD_12809].[PDTABLE_12_1].LINE_ID FROM [DD_12809].[PDTABLE_12_1] JOIN " _
    + "(SELECT [RA_12809].[PDTABLE_201].MAT_DESCRIPTION " _
    + "FROM [RA_12809].[PDTABLE_201]) AS FAB " _
    + "ON [DD_12809].[PDTABLE_12_1].PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS"
    The format of the query is copied from a SQL programming manual.
    I also tried executing the query using a straight JOIN on the two tables but got the same results. Any insight would be helpful. Thanks!
    Edited by: user11338343 on Oct 19, 2009 6:55 AM

    I believe you are receiving the error because you are trying to JOIN on a column that doesn't exist. For example you are trying to join on FAB.PIPING_MATER_CLASS but that column does not exist in the subquery.
    If you want to do a straight join without a subquery you could do the following
    SELECT  DD_12809.PDTABLE_12_1.LINE_ID
    ,       FAB.MAT_DESCRIPTION
    FROM    DD_12809.PDTABLE_12_1
    JOIN    RA_12809.PDTABLE_201    AS FAB ON DD_12809.PDTABLE_12_1.PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS  HTH!

  • How do I combine two or more CDs into one album?

    How do I combine multiple CDs, like box sets, into one album in iTunes?

    See also Grouping tracks into albums.
    tt2

  • How do you combine two iTunes libraries - my husband I have separate iTunes libraries and want to combine our music

    iTunes: my husband and I have two separate iTunes libaries and would like to combine them.  I have tried homesharing but as my laptop is not an Apple I can't seem to find advice online with Apple.
    Can anyone help. 

    iTunes- How to share music between different user accounts on a single computer
    You cannot merge two separate libraries across user accounts. Photos does not have the function of merging different Photos.library files. If you have Aperture then you can merge the two before migrating over to Photos.

  • How do you combine two separate paths into one?

    I have two two separate paths that overlap and I want to combine into one path. How do I do that?

    I've now worked it out thanks it thanks. I highlighted the main path and the outer path to the second one and clicked on merge shape components. Then highlighted the inner path and did the same and this has worked.

  • Powerpivot - Can't insert formula that combines two or more different columns and keep getting message "unhandled exception has occurred in a component in your application...

    I am using powerpivot v2 with excel 2010.
    When I go to my excel file's powerpivot and I try to insert a formula in any column, I constantly get the following message:
    "unhandled exception has occurred in a component in your application. If you click continue, the application will ignore this error and attempt to continue".
    ************** Exception Text **************
    System.InvalidCastException: Return argument has an invalid type.
       at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
       at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.Office.Interop.Excel._Application.get_ActiveWorkbook()
       at Microsoft.AnalysisServices.XLHost.Addin.GeminiRibbon.currentClientWindow_InFormulaBarChanged(Object sender, EventArgs e)
       at Microsoft.AnalysisServices.Common.SandboxEditor.formulaBar_Leave(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    Does anybody know how to fix this ?

    Mark,
    I used the Fix It found here:
    http://support.microsoft.com/kb/2739501
    I would have to ask my IT support person for more specifics, but as I understand the scenario with my particular laptop: the laptop came preloaded with RTM build of 2013.  We used Control Panel to uninstall Office 2013, in order to install Office
    2010.  I installed PowerPivot add-in and used it successfully with no issues for several months.  After attempting to install another program and encountering issues with apparent traces left behind of Office 2013 uninstall, I found the link above
    and used the Fix It to attempt to remove all remaining traces of Office 2013.  While it did appear to find and clean-up quite a bit left behind from the Office 2013 install, I was surprised to find an error upon entering my existing installation
    of PowerPivot for 2010 and attempting to type new formulas into the formula bar.
    My experience to-date is that an error message stating ""Return Argument Has an Invalid Type" appears anytime I select or modify a formula in the formula bar that would cause the intellisense to appear.  For example, when I first click into the formula
    bar, I do not get an error...but as soon as I type the first letter, before the intellisense appears, I get the error message.  Throughout the remainder of the formula as I type, just prior to any time when the intellisense drop-down will appear
    again, I get the same error message again (see details below).
    At one time, although I can't reproduce it now, the error message did state ".Net Framework" in the menu bar of the error pop-up window.  I can't get that to appear again, as it now only says "PowerPivot for Excel".  Based on this, I had attempted
    to see if I could repair my .NET framework install using the following tool:
    http://www.microsoft.com/en-us/download/details.aspx?id=30135
    I learned, however, that since I am running Windows 8 which comes with .NET 4.5 built-in to the OS, this tool does not yet cover that version for repair.
    While the overall end-result of my PowerPivot models appear to be just the same, having to click through "Continue" on the error message multiple times each time I enter a new formula is a huge drain on productivity.
    Let me know if you have any additional questions.
    David
    System.InvalidCastException: Return argument has an invalid type.
       at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
       at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.Office.Interop.Excel._Application.get_ActiveWorkbook()
       at Microsoft.AnalysisServices.XLHost.Addin.GeminiRibbon.currentClientWindow_InFormulaBarChanged(Object sender, EventArgs e)
       at Microsoft.AnalysisServices.Common.SandboxEditor.formulaBar_Leave(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    David Duncan Consultant I.B.I.S., Inc.

  • How do you combine two pictures?

    Not "ghost" them as transparancies, but cut out an image and put it over another?

    Please see post #3
    http://forums.adobe.com/thread/1405501

  • Combining two or more interactive forms

    How do you combine two or more interactive PDF's in Livecycle? I want to combine at least two forms I created separately in Livecycle so I can print them double sided. I am new to this program. If it is a matter of coding, could someone please explain the steps needed to achieve this. I'm hoping it is possible.
    Thanks

    The only way to combine two LiveCycle forms is in Acrobat. There is a button at the top in Arobat Pro that say "Create". Click that and select PDF Portfolio from the bottom of that list. You can then pick how you would like your portfolio to look and work, and then click the "Add Files" button. You can add as many files as you need to. The display can be customized by changing the color themes, importing a background image or map and creating a custom header. The nice thing about a portfolio is that it can contain a variety of files, not just LiveCycle forms. You can import Word files, videos, music, whatever and when the user selects a file, it will open the native program that they have installed on their computer to run it. Individual pages can be extracted and saved to the user's computer, forms can be filled in and saved back to the portfolio.
    The portolio is then saved as a pdf and the total size is less than the sum of all of it's parts. It can then be emailed and opened by anyone with the free Adobe Reader. We use it to combine brochures and forms in the same pdf to make it easy for our clients to access everything they need.
    Hope this helps.

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • How do you combine 3 different itunes libraries from 3 different computers to one computer?

    How do you combine 3 different itunes libraries from 3 different computers to 1 computer?
    Can you keep it from creating duplicates?  These libraries have some duplicates.
    How do you deal with duplicates? 
    I'm talking 50GB. 
    All computers are authorized. 
    THANKS for any suggestions.

    You can't.
    If accounts could be merged, then everybody could merge their accounts with everybody and there would be no need for anyone to buy anything.

  • How can you combine 2 shapes while preserving individual colors?

    I want to be able to apply vector textures [for t-shirts for example] by knocking the texture shape out of the original shape. Now, say I have a logo with several layers, or a bunch of shapes together, and I want to apply ONE texture across the entire thing (as a knockout). What is the best way to go about this.
    And as my question asks, how can I combine two objects into one shape without making them one color? Using the pathfinder of course. Aka, while still maintaining individual colors. Thanks!

    I don't have a specific project in mind, but I can mock one up. Okay, so in this example I have a "logo" that has text (in outlines), a gradient, and another shape (it's not a stroke) behind everything. And on the side you can see my texture. Normally, using the "minus front" feature, you can knock the texture out of the shape. But that doesn't work for a complicated combination of shapes (even if it's grouped).
    Solutions for this?
    I should start a whole post about every possible way to apply textures in Illustrator. Because I know a few different ways, but they all seem to have problems....

Maybe you are looking for