How do you configure a newer Mac mini to use a VGA adapter?

I don't know what could be wrong the computer was fine with DVI but my tv isn't hdcp compliant and won't play rentals or netflix over dvi, so I need to use VGA adapter. My Panasonic display is set to rgb mode, but I tried all modes. Already tried rebooting. Any advanced settings for changing the Mac mini output to rgb? Any other ideas on why no picture at all?

Thanks tried that already-gonna try on a newer monitor. Probably time to let go of my old time plasma display but it's hard-still looks great and it cost 4 grand but I could get something comparable for 6-8 hundred now

Similar Messages

  • How can I authorize my new Mac Mini to use downloads in my iTunes account?

    Hi. How can I authorize my new Mac Mini to access music on my old itunes account?

    Choose Authorize Computer from the Store menu at the very top of the computer's screen.
    (73809)

  • How can I connect a new mac mini to my old vga monitor? There doesn't seem to be a mini display port

    I have an old monitor with VGA port, and was wondering if anyone knows how to connect this to the new mac mini. Older mac minis have the mini display port, and if that were the case I would use the mini display port to VGA adapter, but this new mac mini doesn't have one. It just has the thunderbolt port or HDMI port for displays... I've been looking for an adapter to connect my display to one of these but cannot seem to figure it out. Any advice? Thanks in advance.

    The Thunderbolt port is the one to use; you use the same mini-DisplayPort adapter you used for the older minis.
    Regards.

  • How can I configure my new Mac Pro to output the timeline via HDMI

    How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
    If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
    Thanks,
    GEvans
    DarthPro
    3.7 QCIntelXeonE5
    12 GB
    AMD FirePro dual D300 2048MB
    OSX 10.9.2

    If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
    If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
    Any more requires ACTIVE Adapters.
    The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
    StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

  • I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    Doggiemommie,
    Copying files is not a good idea.
    The "other Mac" was backed up onto Time Capsule using the Time Machine. On your new Mac you should restore the old user - rather than copy files manually.
    This usually happens during the initial setup of the new computer or you can do it later using Migration Assistant.
    Please note, it is possible to damage backup file on the Time Capsule when you browse it and copy files manually.
    Hope this explains.
    TZ

  • How do i connect my new mac mini to the thunderbolt display

    how do i connect my new mac mini to the thunderbolt displa,  It arrives tomorrow?

    It has a built-in Thunderbolt cable, see here: http://www.apple.com/displays/specs.html
    So assuming your mini has a thunderbolt port (you said it's new so I assume it does), you'd just plug the display's thunderbolt cable into the mini's Thunderbolt port.

  • How do I pair a new Mac mini (out of the box) to a Logitech keyboard

    How do I pair a new Mac mini (out of the box) to a Logitech keyboard.
    According to the help desk it is not possible you need an Apple keyboard to complete the task this does not seem right as it states on the Apple website that the products can be mixed and matched.
    Help?????.

    SYSTEM PREFERENCES>Blutooth
    Add New device by clicking "+"
    Turn keyboard into discoverable mode
    If it shows up add it, if not you may need drivers from logitec
    I have sucsessfully paired non aple keyboards before

  • How do I pair my new Mac mini (mid 2011) and white Apple Wireless Keyboard (2003)?

    I just bought a new Mac mini (mid 2011) and can not set it up via my Apple Wireless Keyboard (2003). I'm disheartened but not surprised that my Bluetooth 4.0 Mac isn't backwards-compatible with my Bluetooth 1.0 keyboard. But I can't find any documentation confirming the fact that my non-paired, but tested & perfectly functioning keyboard will not work with current Macs.
    I was however, able to locate a tech support doc (http://support.apple.com/kb/HT4112) that mentions my Apple Wireless Keyboard (2003) is not compatible with iOS devices. (Which is not critical because iOS provides a non-physical keyboard. Aside, it would be lovely were Apple to add a non-physical keyboard to Mac OS X, if only so new desktop owners can continue to set up their Macs in a pinch.)

    I just bought a new mini mac (lion 2011) with a wireless keyboard.  I could not get the mac to recognise the keyboard.  Spent several hours back with the Genius team who replaced keyboard and mac but did not get anywhere.  They gave me a wired keyboard, was able to configure the mac and then it recognised the wireless keyboard.
    Seems this is a problem with the new mac/OS

  • How do you hook a 2012 Mac-Mini to a VGA monitor

    How do you connect a thunder bolt (or HDMI) 2012 Mac-Mini to the secondary VGA input on my LCD monitor?

    Get the Mini DisPlay port to VGA adopter. It plugs into the Thunderbolt connector
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adaptor

  • Could  you change to new Mac mini

    My friend gave me Mac mini as birthday gift last Sunday.
    But I found Apple release new Mac mini with wireless Lan card. (My friend bought this last week)
    Can I exchange to new one (mine is still in a plastic cover but box is opened or could you install Wireless lan card?
    My friend still has receipt.
    Please answer...
    We don't have Apple shop in my town so I want to visit a apple shop during my business trip in Cincinnati.

    If it came from Apple, either online or in a store, it should have been the latest model, and you should call them to discuss it's replacement.
    If it came from an Apple reseller, you will likely need to return it to the same place it was bought, since Apple don't control resellers, only sell stock to them.

  • How can i control my new mac mini using my new macbook air? Thanks

    Hi, I would like to control and even file share my macmini using my macbook air... the mac mini is plugged into the family 50inch plasma... so getting access to it is not always easy! I'd like to play itunes, films, file share, just about do everything from the macbook air as if I was on and in front of the macmini... i'm hoping to do this from any country using wifi!
    I've looked at screens - vnc client, but can;t find anywhere where it says I should download the app... is there a master to download to the mac mini, then waht do i download to the macbook air to enjoy control... also am i expected to download twice and pay twice?
    I'm very new to the mac world... loving it, but lots to learn! Appreciate your help, thank you
    Chris
    PS... bonus if I can also control the mac mini using my iphone4 and ipad 2 (yup, my bank balance took a major hit.... apple certainly got me hooked!)

    Sceen sharing is built into the OS  go to your help in the finder and type in "screen sharing"
    To set up screen sharing: (on the mini)
    Choose Apple menu > System Preferences and click Sharing.
    Select the Screen Sharing checkbox.
    To specify who can share your screen, select one of the following:
    All users: Select this if you want to allow any user with a user account on your computer to share your screen.
    Only these users: Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Accounts preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list and click Select.
    Click Computer Settings and set the following options:
    Anyone may request permission to control screen: Select this to allow anyone on your network to request to share your screen.
    VNC viewers may control screen with password: Select this and enter a password that VNC viewer applications can enter in order to control your screen.
    It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

  • HT3231 How can I migrate to new Mac mini from Power Mac G5 running Mac OS X 10.4.11 (85165)?

    Mac Mini's Migration Assistant requires a version of Migration Assistant on Mac G5 which isn't compatible w/ OS X 10.4.11. So Migration Assistant won't proceed with a migration. Any way around this?
    Greg

    Someone in the Tiger Forum may have an answer.
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger

  • Mac mini with minidisplayport to vga adapter: display does not sleep

    I have a late 2009 mac mini. When using a mini displayport-vga adapter from Apple, whenever the mini puts the display to sleep the video goes black and my monitor goes into test mode (not sleeping).
    It's almost like the signal to tell the display to sleep is not passing through the adapter. I have a Dell 2007WFP.
    It works correctly with a minidvi-dvi adapter, but I have another computer connected via dvi so I would like to keep the mini on vga.

    The dell would not go to sleep, ever.
    For anyone else having the same issue, I got it resolved. I got another VGA cable and it now works perfectly. It is possible the cable I was using was older and didn't have a required wire or maybe was broken.

  • How can I get my new mac mini to recognize my sharp vl-nz100 video cam?

    I've got the camera hooked to the firewire port and the camera is set to vcr. But still Imovie won't recognize the camera.

    Hi nainmom,
    Thanks for visiting Apple Support Communities.
    I recommend starting with these steps if your iPod nano is not recognized by your Mac:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Best,
    Jeremy

  • How do you configure the set of port to use for FTP passive data connection

    I was able to start the ftp server xml db and connect to it locally. When I tried to connect to it from home, I was able to log in but when i do a "get" command the sessions hangs. I also tried passive mode and do a "get" command and it gives me a connection refused error. I am using the default port 2100. I think this might be a firewall issue with the data connection port. I am not sure which range of ports to open for the passive ftp connection on the server side or where to go and set them for for the ftp server to use? Or this issue might not be firewall related??? Any thoughts. Thanks.

    This is a typical problem with VPN/Firewall software and FTP on ports other than 21.
    When you open the FTP data connection the FTP Server identifies which port the data will be sent on using the PORT command which is sent on the command port (typically 21 with a normal FTP server, 2100 by default with XDB). THe client then opens that PORT to accept the data (file, output of an ls etc).
    As I understand it most VPN/Firewall are configured to monitor 21 for 'PORT' requests. They then understand to allow connection on the PORT number passed on the command PORT. Hence with Port 21 firewall / VPN software is not a problem. However since the XDB command PORT is something other than 21 they do not see / honour the PORT commands from the server and hence the client cannot open the data connection on the specified PORT
    As to how to solve it, I wish I knew (After 5 years I still can't use XDB FTP from home to a machine in the office once the VPN tunnel is open :( ). I'm sure it's going to be firewall / VPN software specific and may need the VPN servers to be configured.
    The best bet would be to run the FTP server on 21...
    Add the following line to your listener.ora file
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = hostname) (PORT = 21))
    (PROTOCOL_STACK = (PRESENTATION = FTP) (SESSION = RAW)))
    and then restart the listener as root
    Start the listener as root.
    At the operating system prompt, enter tnslsnr with optional command line arguments. The usage is as follows:
    tnslsnr [listener_name] [-user user] [-group group]
    where:
    Table 4-3 tnslsnr Utility Options
    Option Description
    listener_name
    Specify the name of the listener. If omitted, the default name LISTENER will be used.
    -user user
    Specify the user whose privileges the listener will use when super user (root) privileges are not needed. After performing the privileged operations, the listener will give up root privileges irreversibly.
    -group group
    Specify the group whose privileges the listener will use when super user (root) group privileges are not needed. After performing the privileged operations, the listener will give up root group privileges irreversibly.
    The listener will temporarily switch to the provided user and group immediately after startup. All subsequent operations will be done with the specified user and group privileges, except the system calls necessary to listen on configured endpoints. The listener will revert to super user (root) for a short period of time to listen on reserved addresses, such as TCP ports less than 1024. After the listener starts listening on all of its endpoints configured in listener.ora, it will switch to the specified user and group irreversibly. Therefore, the listener will give up the root privilege that it initially had. In the current release, -user and -group command line arguments only accept user and group identifiers specified in numeric form.
    For example, to execute a root listener called mylsnr and have it use privileges of a user identified

Maybe you are looking for

  • How to open include ZX... of User exit.?

    Hi experts, Please help me how to open an include zxvvfu01 of Function module "EXIT_SAPLV60B_001" of  User exit "SDVFX001" I want  to change some code in include Zxvvfu01 but I open  transaction SE37 and enter "EXIT_SAPLV60B_001" and then double clic

  • TOC from a Header

    TOC is a great addition over Appleworks. I use sections in my reports with differing Headers and footers for each section and put the title of the section in the Header. Then I can use a standard style in each section for topics etc. I'd thought I ca

  • Using iPhone in work environments where cameras are forbidden

    All my colleagues and I have a common problem: We all would like to use iPhones in our Software company but our customers strictly forbid any cameras on their sites, which we visit quite regularly. They fear that someone could make a photo of a produ

  • Why does my Keynote hyperlink take me to the wrong slide?

    I've created a hyperlink to direct me to slide #2 in my presentation, but when I play the slideshow, it goes back to slide 1 instead. Please help!

  • Tables for Qurey names and cube

    hi, I want to know the list cubes against each query. can any one tell me what are tables for the folllowing 1) to get list generic queries avalible .? 2) cube against each of that query? 3) Data source against each cube? 4) generic web templates aga