How do you configure Enterprise Server to allow WiFi retrieval of email when in WiFi Area

We have an Enterprise Server and WiFi in offices and homes and lots of free WiFi on our travels.  How do you configure the phones/enterprise server to allow this?  I cant see any easy option??

Llessur999 wrote:
That is a reasonable approach. Without changing network configuration, I don't see an alternative. A few considerations:
Based on your experience, will the length of time to detect unreachability (a network timeout?) cause a usability issue?
Must you support a scenario where a user transitions LAN-to-WAN or WAN-to-LAN while using the app?
If this is used by a wide audience, will configuring the primary/fallback be straightforward?
I don't think there's a usability issue.
Yes. The app is designed for a brick/mortor location that essentially wants to drive the user to the location. The user has to ability to interact with specific hardware components at the location via server/port communications - some of which they can do while they are remote. While they are on location, they need to retain that ability to interact with local equipment even more. Users could be asked to not go on the location wifi of course but that just seems silly and an overall bad user experience.
The primary/fallback configuration should all be done within code (no user interaction). For example the WAN IP will always be X.X.X.X (be it Public IP or dyndns - makes no difference), while the LAN configuration will always know that the lan server it needs to communicate will always be at a specific LAN IP (192.168.x.x).
It would be  godsend to have some sort of API call (or class) that can accept a call to CFStreamCreatePairWithSocketToHost to a specific IP and on seeing that it's unreachable automatically try the secondary IP before returning a failure on the stream.

Similar Messages

  • How do you configure the server in this situation?????????????

    Hi,
    We have Oracle 10.2 and Windows 2003.
    We have Oracle on Cluster (with Windows software).
    When the System are without cluster all it’s OK!!!!!!
    We have 2 Resources Cluster Group: Oracle and Applications.
    We have Oracle in Oracle cluster group.
    We have “W” Drive and a ftp program in Application cluster group.
    We have C drive in both nodes. We have installed Oracle in both nodes but we have “W” drive only associate to the Active Node because is a Cluster resource (Application cluster group).
    All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
    We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
    We think to put UNC pathes instead of “W” but it’s not possible (Metalink: Note:290703.1)
    How do you configure the server in this situation?????????????
    Thanks!

    We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
    If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
    Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

  • How do you configure DHCP server on OSX Lion Server

    I want to use my Mac Mini Server as a DHCP server on my network.   I cannot find the place under Server to configure it.  
    Where would I find it?   It is not under Server.

    Hi
    Download the Server Admin Tools from here:
    http://support.apple.com/kb/DL1457
    These are not installed when installing Lion and then Server App. Once installed launch Server Admin, click on the Server's name in the side panel, click on Settings > Services and enable the DHCP Service. Once enabled it should appear in the side panel. The rest should be fairly obvious?
    HTH?
    Tony

  • How do you configure the default Webserver  and AppEX in XE(windows)?

    I'm new to XE but an old hat with Oracle Standard and Enterprise editions, Apache and AppEx (htmldb).
    What is the default webserver that comes with XE(windows) and how do you configure it? Where are the httpd config files?
    Also I read in the doco that you need to use Apache if you want to use https. Is there any doco on how to configure XE with Apache?
    Also with respect to AppEx
    where are the physcial files e.g. I can't find the following file or directories. Where is virtual directory /i/ mapped to? Where is this configured?
    http://127.0.0.1:8080/i/htmldb/builder/db_users_ctrl.gif
    regards
    Paul Platt

    Paul,
    for the Apex files see: http://daust.blogspot.com/2006/03/where-are-images-of-application.html
    For configuring the Apache as a proxy to XE:
    HTTPS with Oracle XE ?
    Re: Existing http server
    ~Dietmar.

  • How would you configure your database?

    How would you configure your disks with those specifications?
    General Database Characteristics:
    os is Oracle Enterprise Linux 64 bit
    Enterprise Edition
    180GIG size database.
    High "oltp" environment.
    Estimated growth of 40 to 60GIG/year
    20GIG of archivelogs/Day
    Flashback time is 24 hours:120GIG of flashback space in avg
    Local backup. Full database copy, then incremental is the preferred method.
    That way, if a datafile goes bezerk, replace with backup datafile then recover.
    Or if only a few corrupt block, block recover with rman.
    BTW: Backup is done locally first, then send to another server, than on tape.
    Archivelogs is duplexed on another server.
    General Hardware Info:
    Server Platform: Dell PowerEdge 1950
    16 GIG RAM
    2 * 64 bit CPU's
    2 * local 300G/15rpm disks
    Storage: Dell PowerVault MD3000
    15 * 300G/15rpm Disks
    Possibility for 17 disks here.
    Here is my configuration so far:
    OS+ oracle binary + Online Redo Logs Copy 1 + Control File Copy 1: 2 disks raid 1
    flashback + backup + Online Redo Logs Copy 2 + Control File Copy 2: 4 disks raid 1 or 10
    archivelogs: 2 disks raid 1
    Temporary Datafiles: 1 disk no raid
    UNDO Datafiles: 2 disks raid 1
    Datafiles 6 disk raid10
    total 17 disks: + spare disks on the side of one ever fails
    1) How would you configure it with those specs?
    2) Is there missing info to make a particular decision?

    Here is my reply concerning data separate from index files:
    See http://www.dizwell.com/prod/node/751 for the complete article.
    "Why wouldn't you keep indexes separate from their tables?! Because doing so makes no difference to performance... and I patiently explained that a table and its index are never accessed simultaneously by a single user so that contention between them cannot arise. And yes, in a multi-user system, of course the two could be accessed simultaneously -but so could two tables, or two indexes. "

  • How do you configure a farm name in RDS 2012?

    I understand Remote Desktop Services has undergo some drastric changes.
    How do you configure a farm name in RDS 2012? Or is the concept around farm name changed in another concept?
    Although I have imported a certificate on the RDCH withe the farm name I want to use. When I click on a RemoteApp on the RD Web Access portal, it does not connect to the right farm name.
    Boudewijn Plomp, BPMi Infrastructure & Security

    You don't.  You create a collection.  A client connects to the Connection Broker and then is redirected to the collection it is connecting to.  The collection name is embedded in the connection file that the client downloads from RDWeb or
    the RDWeb feed. 
    A collection is basically at least one RDSH server (for session based desktops) or one virtual machine (virtual machine based desktops). 
    Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

  • Unable to connect siebel gateway name server during configuration enterprise server

    Hi,
    when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
    I perform the following steps:
    1) Configuration Gateway Server Name
         Entered port TCP/IP = 2320
         Enable automaticaly start server gateway name server
         Show pop up "Configuration siebel succesful"
    2) Configuration Enterprise Server
         Entered name account authentication gateway server name = SADMIN
         Entered passoword account authentication gateway server name = SADMIN
         Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
         Entered port TCP/IP gateway server name = 2320
         show pop up error : "Unable to connect gatawey server name"
    I can not find the log file in order to understand the issue.
    When I try to connect to the gateway from the browser with the url
    vdimtnsiebel01:2320 I get this screen mode:
    ???@??????? ?????????? ????????QÈ  ??? ??????????? ??? ??? ? ?h????
    and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
    SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
    474554202F66617669636F6E2E69636F
    20485454502F312E310D0A486F73743A
    207664696D746E73696562656C30313A
    323332300D0A557365722D4167656E74
    3A204D6F7A696C6C612F352E30202857
    696E646F7773204E5420362E313B2057
    4F5736343B2072763A32312E30292047
    65636B6F2F3230313030313031204669

    Hi,
    Please clarify me the following.
    You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
    You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
    You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
    Please confirm.
    Below pages are for reference (not directly relevant to your question):
    http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
    Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
    Thanks.
    Regards,
    Rajkumar Raju

  • How do you configure MacfreePOP?

    how do you configure MacfreePop into Entourage? it always says that it can't find the server.

    does anybody know how to configure MacfreePOP into Entorauge?

  • How would you make a server on Visual Studio?

    I would like to make a database server on Visual Studio which can be accessed by other computers as well. I know how to make a basic local database but please can somebody help me with this. Thanks!

    I would like to make a database server on Visual Studio which can be accessed by other computers as well. I know how to make a basic local database but please can somebody help me with this. Thanks!
    Why not use something like SQL or MySql? You would simply install the database software on your VM or server, then you configure your server's endpoints, firewall/router's ports, and you should be good to access it from any Client-Capable software.
    “If you want something you've never had, you need to do something you've never done.”
    Don't forget to mark
    helpful posts and answers
    ! Answer an interesting question? Write a
    new article
    about it! My Articles
    *This post does not reflect the opinion of Microsoft, or its employees.

  • How do you configure 8.1.7 NT/IFS 1.1 to use Apache for IFS?

    Now that the 8.1.7 version for NT and IFS 1.1 is out how do you configure it to use Apache for IFS?
    There is no 'ifsapachesetup' file included in the download (the CDs are still not available).
    Installed 8.1.7 database on a clean (no oracle) PC running NT server 4.0 sp4.
    Installed IFS 1.1 download using default selections except I unchecked the JWS option.
    The database works fine and the IFS agents appear to be operating properly.
    IFSMGR batch file works fine but how do you access the webui? Have tried ports 80, 8080, 7777, 7070, 100 and nothing works.
    null

    Hanne ....Greetings. The Apache HTTP server is up and running. Even better, my users can get to it! The URL issue, I think, really put a damper on what was otherwise a pretty clean install. Specifically, on page 9-9 of the Oracle Internet File System Release 1.1 Setup and Administration Guide; Part No. A81197-04, 1-Sep-00, that I downloaded from technet.oracle.com, the ifsapachesetup.exe reference, the port 7777 reference and then the invalid URL sent me round and round for awhile. When I saw Rick Post's post on the iFS Forum and then Brian Ball's response, I knew there was something incomplete about the documentation. When I figured out which parts of the 'system' need to be running, I saw that the /ifs/files URL would work if Apache and ifs were up, and it did.
    Also, I think the startup/shutdown of the OracleHTTPserver service vs the Start/Programs/oracle_home/Oracle HTTP server/Start....Stop could be clarified a little more. I did find out that you could accidently shut down the Apache server by closing the NT application window it runs in, whereas, starting HTTPserver from the services Services eliminates this (this I think is in the documentation).
    In short, I'm up and running. Neat product. Need an errata in the Release Notes or Installation Guide regarding this URL deal.
    thanks
    fred

  • How do you configure spaces in Lion?

    OK, I've found most of what I need to configure Lion but I can't find the preference panel to change the 'all spaces' view to the old style (where you see all the spaces or desktops placed on the screen in equal sizes). The new default 'mission control' view isn't as useful to me. I also don't see where to assign apps to a specific space. Finally, how do you get at the 'spaces' option for a hot corner? Where has all this moved?

    Obviously it's grown into the mission control feature... I don't care what the terms are now, I just want to know where the controls moved to.
    OK, let's try this:
    How do you configure mission control to display spaces in the old tiled format? Or whatever you call spaces/desktops now. For example, the 6 spaces I was using are still there. Apps still open where they were set to (go migration assistant!). Where do you get at the settings for this stuff now?

  • Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    David Why? wrote:
    ... How do you configure older Airports in OS X 10.7.5??
    Use the technique described in this thread: I can't install airport utility 5.6
    Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
    I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
    Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
    Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

  • Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

    Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
    charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
    Regards, Bill
    * update
    I've tried modifying this key and the path:
    “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
    http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
    Also tried using symlinks as detailed here:
    http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

    Here's some links I've used to try to figure this out:
    http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
    http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
    http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
    Regards, Bill
    The registry method does not work with 8.1.  I found this out the hard way.  Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

  • How do you configure the DAM so it can be shared across multiple CQ instances?

    How do you configure the DAM so it can be shared across multiple CQ instances?

    You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
    clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
    But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
    Yogesh

  • How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    See Terence Devlin's thorough explanation here.

Maybe you are looking for