How do you configure multiple appservers in iisproxy.ini?

I am coming from the WebSphere world, and trying to figure out this whole WebLogic
thing. The problem I am having is for the weblogic plugin for IIS. In WebSphere,
the plugin was proxied by path and port #. I setup an iisproxy.ini and got it
working for one appserver, but when I went to add another one of our appservers,
I couldn't get it to work.
What I have is:
# EAR 1
WebLogicHost=10.10.xxx.xxx WlForwardPath=/useradmin,/abc/def,/ghi/ttk
WebLogicPort=8031
ConnectTimeoutSecs=20
ConnectRetrySecs=2
How do I add another WlForwardPath= line with different paths on a different port?
I am lost.
Thanks for any help!!

Hi,
So it sounds like you have two PXI systems that are not connected or related to each other, is that right? Since your PXI chassis connected via MXI-3 is working fine, we�ll take that out of the equation.
It sounds like you are trying to configure your PXI-8176 system as a Remote System through an Ethernet connection. Is your PXI-8176 running Windows (if so which version) or Real-Time (RT) operating system?
If you are running Windows XP on the PXI-8176 and also on your computer you can use XP Remote Desktop to control your PXI-8176 system through Ethernet (see the following link for information on that):
http://digital.ni.com/public.nsf/websearch/C074C33F4DE3FA5186256D3D007788DA?OpenDocument
Another option is to use Remote Device Access (RDA) to cont
rol your SCXI modules and DAQ board (6052E). RDA will only work with Traditional NI-DAQ, it is not supported in NI-DAQmx. I�ve included a couple of links for KB�s that have more information on RDA for you.
http://digital.ni.com/public.nsf/websearch/3a4d2f5f4354e53a862568c0006a8bc0?OpenDocument
http://digital.ni.com/public.nsf/websearch/5CC9792C6CD4A34C862565BC0072D5DF?OpenDocument
If you ordered your controller only with Real-Time on it you can use the following document to configure and troubleshoot your PXI-8176 RT system.
http://www.ni.com/support/install/install_configure_6.htm
I hope this helps you.
Regards,
Doug K.
National Instruments

Similar Messages

How do you configure multiple PXIe chassis to share Tclk synch with the 6672 timing module?

Hi,
I have two PXIe chassis, each with a number of digitizers (configured through NI-SCOPE). Each chassis has a PXIe 6672 timing module. I have downloaded the sample VI from:
http://zone.ni.com/devzone/cda/epd/p/id/5254
which deals with PXI chassis. My question is this: in the VIs at the above link (and in fact all VIs I've seen for using the 6672 for sharing triggers), the VI needs access to the resource identifiers for both Master and Slave timing modules, how do I access the (remote) slave resource identifier from the master chassis? I feel like I'm missing something obvious, but can I do this using just an ethernet connection, or do I need another module to enable the master chassis to view the devices on the slave chassis in MAX?
Thanks for any help you can provide,
Cillian

Those example VIs are written to be used when a single host PC is controlling multiple chassis so there is just one computer running the program. Since both of your chassis have their own controllers it will be necessary to run a program on each (one as master, the other as slave). You can modify the code from that example to create and Master and Slave VIs. For the Master you will call the VIs as specified in case 0 of the example; for the Slave you will call the VIs as specified in the default, 1 case of the example.
You will also want to send a signal from the Master to the Slave to let the Slave know that the clock is being generated. You could use TCP/IP or a PFI line to do this. The basic order of events should be as follows:
1. VI runs on Slave to configure it to accept a clock.
2. VI runs on Master to begin outputing the clock.
3. Master sends a signal to Slave to let it know that the clock is being generated.
4. Continue with the rest of your program.
Let me know if you have any questions about this.
Barron
Applications Engineering
National Instruments

How do you configure multiple PXI 1011 chassis' in MAX?

I have two PXI 1011 chassis'. The first has the MXI-3 card hooked to a MXI-3 PC card through fiber. The second chassis has an 8176 controller and the 6052e GPIB card. Both chassis have multiple SCXI cards. The problem is the configuration in MAX. MAX 3 picks up the MXI-3 card and chassis with all the SCXI modules, but will not pick up the 8176 chassis. This 8176 is hooked to the PC through a CAT5 ethernet switch.I know there are problems with multiple chassis configuration, but I'm sure I'm just missing something here.

Hi,
So it sounds like you have two PXI systems that are not connected or related to each other, is that right? Since your PXI chassis connected via MXI-3 is working fine, we�ll take that out of the equation.
It sounds like you are trying to configure your PXI-8176 system as a Remote System through an Ethernet connection. Is your PXI-8176 running Windows (if so which version) or Real-Time (RT) operating system?
If you are running Windows XP on the PXI-8176 and also on your computer you can use XP Remote Desktop to control your PXI-8176 system through Ethernet (see the following link for information on that):
http://digital.ni.com/public.nsf/websearch/C074C33F4DE3FA5186256D3D007788DA?OpenDocument
Another option is to use Remote Device Access (RDA) to cont
rol your SCXI modules and DAQ board (6052E). RDA will only work with Traditional NI-DAQ, it is not supported in NI-DAQmx. I�ve included a couple of links for KB�s that have more information on RDA for you.
http://digital.ni.com/public.nsf/websearch/3a4d2f5f4354e53a862568c0006a8bc0?OpenDocument
http://digital.ni.com/public.nsf/websearch/5CC9792C6CD4A34C862565BC0072D5DF?OpenDocument
If you ordered your controller only with Real-Time on it you can use the following document to configure and troubleshoot your PXI-8176 RT system.
http://www.ni.com/support/install/install_configure_6.htm
I hope this helps you.
Regards,
Doug K.
National Instruments

How do you configure the DAM so it can be shared across multiple CQ instances?

How do you configure the DAM so it can be shared across multiple CQ instances?

You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
Yogesh

How do you configure a farm name in RDS 2012?

I understand Remote Desktop Services has undergo some drastric changes.
How do you configure a farm name in RDS 2012? Or is the concept around farm name changed in another concept?
Although I have imported a certificate on the RDCH withe the farm name I want to use. When I click on a RemoteApp on the RD Web Access portal, it does not connect to the right farm name.
Boudewijn Plomp, BPMi Infrastructure & Security

You don't. You create a collection. A client connects to the Connection Broker and then is redirected to the collection it is connecting to. The collection name is embedded in the connection file that the client downloads from RDWeb or
the RDWeb feed.
A collection is basically at least one RDSH server (for session based desktops) or one virtual machine (virtual machine based desktops).
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

How do you have multiple apple id's with one itunes

how do you have multiple apple id's with one itunes

I have multiple IDs and use the single computer sharing itunes. By 'sharing' I mean we open the pc, open itunes and log in with our individual ID as required.
While Im logged in I plug in my device. I transfer my purchases from my device as per the file menu (not the check for auto downloads). I move them as required to whichever playlist I like.
Then when my son wants to use itunes or update his device, he logs in, plugs in his device, transfers purchases from his device, puts whatever music he wants into his playlist and/or drags direct to the device regardless of who purchased it and then syncs.
Im not sure how it works associating the pc with only one ID or all that other business- I know I don't fiddle with any of that.

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time?

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time? Right now, when I'm trying to highlight documents to export, I have to click on each document individually. Is there a way to highlight one document while scrolling down the list until all desired documents are highlighted? I would like to rapidly be able to do this to save time when I am exporting or saving multiple files from my documents to an external drive, CD-Rom or cloud storage.

Click on the first item
Hold the Shift key
Click on the Last Item.
All the items in between will be selected.

How do you delete multiple emails from your "inbox" w/o clicking on each one individually?

How do you delete multiple inbox emails to trash w/o clicking on each one individually?

Highlight one. Click edit. Click "mark all" at the bottom. Click trash.
Barry

How do you select multiple files to drag

How do you select multiple files to drag from one folder to another? Is there a command?

Open the folder which has the contents you want to transfer. Press COMMAND 'A' and then all of the data should be highlited in blue. Drag it to the new folder.
If only certain files are to be transferred, then you have to select them (COMMAND 'A') individually and the drag them as a group to the new location.
Ciao.

How do you add multiple iTunes to Keynote

How do you add multiple songs from the iTunes to your Keynote presentation?

Jer&Renee,
welcome to Apple Discussions.
It depends where you want them in your presentation.
Open the Media inspector and choose a playlist. In the list of entries, mark those you want to add to Keynote (use command-click to mark multiple titles not in one block).
Then drag the marked titles either on a slide or on the small Audio field (looks like a frame) in Document inspector. When you then hover the cursor at the Audio "frame", you'll see the quick info "Multiple Files". You cannot change the order or remove one of the files, but only all of them.

How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?

How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?
My screen is cracked and I need to replace my phone and I don't see a way of selecting multiple messages or even conversations one at a time to forward them to email or to save them to a memory card. I can delete thread but can't forward it or move it. Is there a setting somewhere that will move the storage location for messages to the memory card instead of internal?
If not, any suggestions on backup apps? I have heard of Txtract to back up SMS and MMS messages, and Titanium Backup to back up everything (SMS, MMS, apps, app data...). Anyone have any experience with those, or other suggestions?
Thanks!
Rich

<Duplicate topic. This thread will be locked. Please see Help transferring data (SMS, MMS, Apps, App data) to new phone? for any replies.>

How do you select multiple songs in itunes to delete

how do you select multiple songs to delete at once in itunes?

Try highlighting the first one yhen command click on the others you wish to delete, when you have the ones selected hit delete.

How do you select multiple files at one time

How do you select multiple files at one time

Select one, and then either command-click another, or in list/column view, Shift-click the item at the other end of the range you want to select. Alternatively, click on a spot in the screen and drag the cursor until all the files are selected.
(114308)

How do you use multiple outputs on a VSTi like Kontakt or Battery?

how do you use multiple outputs on a VSTi like Kontakt or Battery with Logic Pro 7.1? I've heard someting about using AUX busses, but can anyone please provide an actual clear, step by step basic guide?
I've had Logic 3 months now and just don't know how to do this yet, and have yet to actually find it in the manual!!
thx

http://www.sonikmatter.com/wiki/index.php/Tutorial:MultiChanAudioSetup

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How do you configure multiple appservers in iisproxy.ini?

Similar Messages

Maybe you are looking for