How do you configure spaces in Lion?

OK, I've found most of what I need to configure Lion but I can't find the preference panel to change the 'all spaces' view to the old style (where you see all the spaces or desktops placed on the screen in equal sizes). The new default 'mission control' view isn't as useful to me. I also don't see where to assign apps to a specific space. Finally, how do you get at the 'spaces' option for a hot corner? Where has all this moved?

Obviously it's grown into the mission control feature... I don't care what the terms are now, I just want to know where the controls moved to.
OK, let's try this:
How do you configure mission control to display spaces in the old tiled format? Or whatever you call spaces/desktops now. For example, the 6 spaces I was using are still there. Apps still open where they were set to (go migration assistant!). Where do you get at the settings for this stuff now?

Similar Messages

Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

David Why? wrote:
... How do you configure older Airports in OS X 10.7.5??
Use the technique described in this thread: I can't install airport utility 5.6
Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

How would you configure your database?

How would you configure your disks with those specifications?
General Database Characteristics:
os is Oracle Enterprise Linux 64 bit
Enterprise Edition
180GIG size database.
High "oltp" environment.
Estimated growth of 40 to 60GIG/year
20GIG of archivelogs/Day
Flashback time is 24 hours:120GIG of flashback space in avg
Local backup. Full database copy, then incremental is the preferred method.
That way, if a datafile goes bezerk, replace with backup datafile then recover.
Or if only a few corrupt block, block recover with rman.
BTW: Backup is done locally first, then send to another server, than on tape.
Archivelogs is duplexed on another server.
General Hardware Info:
Server Platform: Dell PowerEdge 1950
16 GIG RAM
2 * 64 bit CPU's
2 * local 300G/15rpm disks
Storage: Dell PowerVault MD3000
15 * 300G/15rpm Disks
Possibility for 17 disks here.
Here is my configuration so far:
OS+ oracle binary + Online Redo Logs Copy 1 + Control File Copy 1: 2 disks raid 1
flashback + backup + Online Redo Logs Copy 2 + Control File Copy 2: 4 disks raid 1 or 10
archivelogs: 2 disks raid 1
Temporary Datafiles: 1 disk no raid
UNDO Datafiles: 2 disks raid 1
Datafiles 6 disk raid10
total 17 disks: + spare disks on the side of one ever fails
1) How would you configure it with those specs?
2) Is there missing info to make a particular decision?

Here is my reply concerning data separate from index files:
See http://www.dizwell.com/prod/node/751 for the complete article.
"Why wouldn't you keep indexes separate from their tables?! Because doing so makes no difference to performance... and I patiently explained that a table and its index are never accessed simultaneously by a single user so that contention between them cannot arise. And yes, in a multi-user system, of course the two could be accessed simultaneously -but so could two tables, or two indexes. "

How do you configure a farm name in RDS 2012?

I understand Remote Desktop Services has undergo some drastric changes.
How do you configure a farm name in RDS 2012? Or is the concept around farm name changed in another concept?
Although I have imported a certificate on the RDCH withe the farm name I want to use. When I click on a RemoteApp on the RD Web Access portal, it does not connect to the right farm name.
Boudewijn Plomp, BPMi Infrastructure & Security

You don't. You create a collection. A client connects to the Connection Broker and then is redirected to the collection it is connecting to. The collection name is embedded in the connection file that the client downloads from RDWeb or
the RDWeb feed.
A collection is basically at least one RDSH server (for session based desktops) or one virtual machine (virtual machine based desktops).
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

How do you configure the server in this situation?????????????

Hi,
We have Oracle 10.2 and Windows 2003.
We have Oracle on Cluster (with Windows software).
When the System are without cluster all its OK!!!!!!
We have 2 Resources Cluster Group: Oracle and Applications.
We have Oracle in Oracle cluster group.
We have W Drive and a ftp program in Application cluster group.
We have C drive in both nodes. We have installed Oracle in both nodes but we have W drive only associate to the Active Node because is a Cluster resource (Application cluster group).
All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
We think to put UNC pathes instead of W but its not possible (Metalink: Note:290703.1)
How do you configure the server in this situation?????????????
Thanks!

We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

How do you configure the default Webserver and AppEX in XE(windows)?

I'm new to XE but an old hat with Oracle Standard and Enterprise editions, Apache and AppEx (htmldb).
What is the default webserver that comes with XE(windows) and how do you configure it? Where are the httpd config files?
Also I read in the doco that you need to use Apache if you want to use https. Is there any doco on how to configure XE with Apache?
Also with respect to AppEx
where are the physcial files e.g. I can't find the following file or directories. Where is virtual directory /i/ mapped to? Where is this configured?
http://127.0.0.1:8080/i/htmldb/builder/db_users_ctrl.gif
regards
Paul Platt

Paul,
for the Apex files see: http://daust.blogspot.com/2006/03/where-are-images-of-application.html
For configuring the Apache as a proxy to XE:
HTTPS with Oracle XE ?
Re: Existing http server
~Dietmar.

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

How do you configure MacfreePOP?

how do you configure MacfreePop into Entourage? it always says that it can't find the server.

does anybody know how to configure MacfreePOP into Entorauge?

How do you configure Enterprise Server to allow WiFi retrieval of email when in WiFi Area

We have an Enterprise Server and WiFi in offices and homes and lots of free WiFi on our travels. How do you configure the phones/enterprise server to allow this? I cant see any easy option??

Llessur999 wrote:
That is a reasonable approach. Without changing network configuration, I don't see an alternative. A few considerations:
Based on your experience, will the length of time to detect unreachability (a network timeout?) cause a usability issue?
Must you support a scenario where a user transitions LAN-to-WAN or WAN-to-LAN while using the app?
If this is used by a wide audience, will configuring the primary/fallback be straightforward?
I don't think there's a usability issue.
Yes. The app is designed for a brick/mortor location that essentially wants to drive the user to the location. The user has to ability to interact with specific hardware components at the location via server/port communications - some of which they can do while they are remote. While they are on location, they need to retain that ability to interact with local equipment even more. Users could be asked to not go on the location wifi of course but that just seems silly and an overall bad user experience.
The primary/fallback configuration should all be done within code (no user interaction). For example the WAN IP will always be X.X.X.X (be it Public IP or dyndns - makes no difference), while the LAN configuration will always know that the lan server it needs to communicate will always be at a specific LAN IP (192.168.x.x).
It would be godsend to have some sort of API call (or class) that can accept a call to CFStreamCreatePairWithSocketToHost to a specific IP and on seeing that it's unreachable automatically try the secondary IP before returning a failure on the stream.

How do you configure the DAM so it can be shared across multiple CQ instances?

How do you configure the DAM so it can be shared across multiple CQ instances?

You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
Yogesh

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

See Terence Devlin's thorough explanation here.

How do you configure the ipad to print air print but of A4 size please ??????

how do you configure the ipad to print air print but of A4 size please ??????

Frankie,
The usual setting is in Printing Preferences.
In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
I can provide details and "how-to" if you need more help.
Printer model info would be helpful, and do you have your printer software loaded yet?
I hope this helps!
We work hard to help!
When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Dragon Tips!
Install your Printer Software!
Look for your Printer’s Software at your printer’s own website!
Software, manuals, alerts, “how-to” information, and much more!
To see if there is software for your printer, Start at: Support and Drivers
Kind Regards,
Dragon-Fur

How can you configure mail settings in process chains?

HI Experts,
please let me know how can you configure mail settings in process chains?

Dear Suman,
To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
To create mails to Process chains:
Right Click on the Process varient select the Create Message in the context menu.
Select the type of mail i.e for successful, Error, Anyways.
Then follow the screens.
Note: The recipient type should be Via Internet.
Hope this helps u.
Regards,
Kishore.Pulla

How do you clear space on hard drive

How do you clear space on your hard drive on a mac book pro?

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. For more on this and very helpful tips:
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/OSX/LionStorage.html

How do you configure 8.1.7 NT/IFS 1.1 to use Apache for IFS?

Now that the 8.1.7 version for NT and IFS 1.1 is out how do you configure it to use Apache for IFS?
There is no 'ifsapachesetup' file included in the download (the CDs are still not available).
Installed 8.1.7 database on a clean (no oracle) PC running NT server 4.0 sp4.
Installed IFS 1.1 download using default selections except I unchecked the JWS option.
The database works fine and the IFS agents appear to be operating properly.
IFSMGR batch file works fine but how do you access the webui? Have tried ports 80, 8080, 7777, 7070, 100 and nothing works.
null

Hanne ....Greetings. The Apache HTTP server is up and running. Even better, my users can get to it! The URL issue, I think, really put a damper on what was otherwise a pretty clean install. Specifically, on page 9-9 of the Oracle Internet File System Release 1.1 Setup and Administration Guide; Part No. A81197-04, 1-Sep-00, that I downloaded from technet.oracle.com, the ifsapachesetup.exe reference, the port 7777 reference and then the invalid URL sent me round and round for awhile. When I saw Rick Post's post on the iFS Forum and then Brian Ball's response, I knew there was something incomplete about the documentation. When I figured out which parts of the 'system' need to be running, I saw that the /ifs/files URL would work if Apache and ifs were up, and it did.
Also, I think the startup/shutdown of the OracleHTTPserver service vs the Start/Programs/oracle_home/Oracle HTTP server/Start....Stop could be clarified a little more. I did find out that you could accidently shut down the Apache server by closing the NT application window it runs in, whereas, starting HTTPserver from the services Services eliminates this (this I think is in the documentation).
In short, I'm up and running. Neat product. Need an errata in the Release Notes or Installation Guide regarding this URL deal.
thanks
fred

How do you configure spaces in Lion?

Similar Messages

Maybe you are looking for