How do you configure the Retina MBP with larger SSD? FW800-to-TB?

The Apple site shows a line that says you can configure it up to 768 I think. But then there is no option on the config page. 256 is not going to cut it even just for programs.
Having to wait for FW800-to-TB adapters is also asinine. Many of us have our whole lives on FW drives. The adapter should launch with the box.
There is also no option for a true anti-glare screen which was a major draw for me; anyone know if the Retina MBP screen is anti-glare? Glossy is not for me or my work.
Thanks ----
jf

First, you need everything transferred from the SSD to the HDD including OS X. Boot from the SSD. Open Users & Groups preferences. Cllick on the lock icon and authenticate. CTRL- or RIGHT-click on your user account in the list. Select Advanced Options. Click on the Choose button to the right of the field labeled, Home dir:. Locate your user folder on the HDD (/HDD/Users/your_user_folder/. Click on the Open button. You must restart your computer.
After restart you will be booting from the SSD but using the Home folder that is located on the HDD. You can now delete the contents of your user folder on the SSD. This should be limited to the contents of the Documents, Downloads, Movies, Music, Pictures, and Sites folders. This should free up considerable space on the SSD.

Similar Messages

  • How do you configure the server in this situation?????????????

    Hi,
    We have Oracle 10.2 and Windows 2003.
    We have Oracle on Cluster (with Windows software).
    When the System are without cluster all it’s OK!!!!!!
    We have 2 Resources Cluster Group: Oracle and Applications.
    We have Oracle in Oracle cluster group.
    We have “W” Drive and a ftp program in Application cluster group.
    We have C drive in both nodes. We have installed Oracle in both nodes but we have “W” drive only associate to the Active Node because is a Cluster resource (Application cluster group).
    All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
    We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
    We think to put UNC pathes instead of “W” but it’s not possible (Metalink: Note:290703.1)
    How do you configure the server in this situation?????????????
    Thanks!

    We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
    If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
    Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

  • How do you configure the DAM so it can be shared across multiple CQ instances?

    How do you configure the DAM so it can be shared across multiple CQ instances?

    You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
    clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
    But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
    Yogesh

  • How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    See Terence Devlin's thorough explanation here.

  • How do you configure the ipad to print air print but of A4 size please ??????

    how do you configure the ipad to print air print but of A4 size please ??????

    Frankie,
    The usual setting is in Printing Preferences.
    In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
    I can provide details and "how-to" if you need more help.
    Printer model info would be helpful, and do you have your printer software loaded yet?
    I hope this helps!                                 
    We work hard to help!
    When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
     2012 Year of the Dragon!
    Dragon Tips!
    Install your Printer Software!
    Look for your Printer’s Software at your printer’s own website!
    Software, manuals, alerts, “how-to” information, and much more!
    To see if there is software for your printer, Start at:  Support and Drivers
    Kind Regards,
    Dragon-Fur

  • How do you configure the default Webserver  and AppEX in XE(windows)?

    I'm new to XE but an old hat with Oracle Standard and Enterprise editions, Apache and AppEx (htmldb).
    What is the default webserver that comes with XE(windows) and how do you configure it? Where are the httpd config files?
    Also I read in the doco that you need to use Apache if you want to use https. Is there any doco on how to configure XE with Apache?
    Also with respect to AppEx
    where are the physcial files e.g. I can't find the following file or directories. Where is virtual directory /i/ mapped to? Where is this configured?
    http://127.0.0.1:8080/i/htmldb/builder/db_users_ctrl.gif
    regards
    Paul Platt

    Paul,
    for the Apex files see: http://daust.blogspot.com/2006/03/where-are-images-of-application.html
    For configuring the Apache as a proxy to XE:
    HTTPS with Oracle XE ?
    Re: Existing http server
    ~Dietmar.

  • How do you sync the wireless keyboard with the Ipad?  It doesn't ever find

    How do you sync the wireless keyboard to the Ipad

    Have you read the iPad manual (Page 22)?
    http://manuals.info.apple.com/enUS/iPad_UserGuide.pdf
    and the Bluetooth Keyboard manual:
    http://manuals.info.apple.com/enUS/Apple_Wireless_Keyboard_2009UG.pdf
    If your keyboard is already paired with another device that is in range then you must unpair it first (see page of the keyboard manual).

  • How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

    How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver?  I have been trying with no such luck.
       I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth.  But for now, I would just like 2 computers to talk and then eventually talk to our own device. 
    One is a desktop w/ the Belkin F8T012 USB adapter.  It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash.  It says it cannot install it because it cannot find the necessary hardware.  I thought this USB adapter was on the approved Bluetooth devices list?  What else should I try?  Another Bluetooth USB adapter? 
    The other computer is a Dell Latitude 820.  It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module.  On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter).  It came with a serial port interface which we modifed to go through a bluetooth interface.  It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port.  But we would like to use the Bluetooth VIs in LabVIEW.  I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well.  Do I just uninstall the driver and then try to have Windows install its own driver?  Do you have any other recommendations?
    Thanks,
       Javi

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • How do you configure the set of port to use for FTP passive data connection

    I was able to start the ftp server xml db and connect to it locally. When I tried to connect to it from home, I was able to log in but when i do a "get" command the sessions hangs. I also tried passive mode and do a "get" command and it gives me a connection refused error. I am using the default port 2100. I think this might be a firewall issue with the data connection port. I am not sure which range of ports to open for the passive ftp connection on the server side or where to go and set them for for the ftp server to use? Or this issue might not be firewall related??? Any thoughts. Thanks.

    This is a typical problem with VPN/Firewall software and FTP on ports other than 21.
    When you open the FTP data connection the FTP Server identifies which port the data will be sent on using the PORT command which is sent on the command port (typically 21 with a normal FTP server, 2100 by default with XDB). THe client then opens that PORT to accept the data (file, output of an ls etc).
    As I understand it most VPN/Firewall are configured to monitor 21 for 'PORT' requests. They then understand to allow connection on the PORT number passed on the command PORT. Hence with Port 21 firewall / VPN software is not a problem. However since the XDB command PORT is something other than 21 they do not see / honour the PORT commands from the server and hence the client cannot open the data connection on the specified PORT
    As to how to solve it, I wish I knew (After 5 years I still can't use XDB FTP from home to a machine in the office once the VPN tunnel is open :( ). I'm sure it's going to be firewall / VPN software specific and may need the VPN servers to be configured.
    The best bet would be to run the FTP server on 21...
    Add the following line to your listener.ora file
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = hostname) (PORT = 21))
    (PROTOCOL_STACK = (PRESENTATION = FTP) (SESSION = RAW)))
    and then restart the listener as root
    Start the listener as root.
    At the operating system prompt, enter tnslsnr with optional command line arguments. The usage is as follows:
    tnslsnr [listener_name] [-user user] [-group group]
    where:
    Table 4-3 tnslsnr Utility Options
    Option Description
    listener_name
    Specify the name of the listener. If omitted, the default name LISTENER will be used.
    -user user
    Specify the user whose privileges the listener will use when super user (root) privileges are not needed. After performing the privileged operations, the listener will give up root privileges irreversibly.
    -group group
    Specify the group whose privileges the listener will use when super user (root) group privileges are not needed. After performing the privileged operations, the listener will give up root group privileges irreversibly.
    The listener will temporarily switch to the provided user and group immediately after startup. All subsequent operations will be done with the specified user and group privileges, except the system calls necessary to listen on configured endpoints. The listener will revert to super user (root) for a short period of time to listen on reserved addresses, such as TCP ports less than 1024. After the listener starts listening on all of its endpoints configured in listener.ora, it will switch to the specified user and group irreversibly. Therefore, the listener will give up the root privilege that it initially had. In the current release, -user and -group command line arguments only accept user and group identifiers specified in numeric form.
    For example, to execute a root listener called mylsnr and have it use privileges of a user identified

  • How do you setup the Mail app with iCloud on an eMac?

    I have recently made an iCloud account on my iPad- includng a free "@me.com" email address, which I've been longing for! I do, however, have the old Apple eMac and would like to set up my "@me.com" email address. When I go to set it up, there is (on the pull down menu) ".Mac", which did not work, "IMAP", and "POP". I know iCloud cannot use "POP", so is there any way to do "IMAP" and how? Please help!

    For some reason, it won't connect to SMTP. I can get emails, but I can't write any. You said to do each port, but there is nothing asking for each port. I need help with the Mail application for Mac OS X v. 10.4.11 (Tiger). Can you help? The attached pics are the steps I've done...
    (Above) I filled in all it asks....
    (Above) Then I filled this in- I am trying to do it without typing "imap.mail.me.com" becuase if you see, it says "Example: mail.example.com"... (Below) It has failed...
    -NOW I WILL DO "imap.mail.me.com"- (Below)
    (Above) Then it gives me a pull-down list to choose from for the Outgoing Mail Server, so I just type: "smtp.mail.me.com" (below)....THEN YOU GET THE ERROR!

  • HT201441 How do you contact the previous owner with a partial email?

    How do you send an email to an unknown previous owner with only a partial email visible on an iCloud locked device? Is there a way to get the entire email address so the old owner can be contacted? There has to be a way to contact the previous owner.
    -bsides

    No, there is no way to get the complete email address. Turn the device in to the police.

  • How do you configure the ADC on RIO7833R for differential inputs?

    I use the 7833 RIO board; my signal source is a differential signal.
    According to the documentation I can configure the inputs to be differential using software, but I have not been able to find any instructions on how to do this.  Can anyone point me to a way to achieve this?
    There is the obvious "braindead" method of putting the positive signal into AI0+, and the negative signal into AI1+, then subtracting - but that would only allow me to use 4 inputs, not all 8.  And it would probably increase the noise due to ADC nonlinearity.  The diagrams show a MUX, I just can't seem to find a way to configure it and the default mode appears to be single-ended.
    Thanks a lot for any information!
    Floris HJ.

    That's great help, thanks Prashanth.  It answers the question which I asked, not the one I wanted answered.  So now the 64 thousand dollar question (from the days when that was still a lot of money):
    Can you do the same thing from software?  In other words, could I set up my VI so it can change input mode in response to a user input or other external condition, and that doesn't require a user navigating to the project explorer?  It would appear that there is some direct access of flash memory going on.  If we know the address, could we poke that register directly (perhaps from the FPGA code itself - obviously we'd then have to signal from the host VI to the FPGA code but I know how to do that).
    Thanks in advance for any help.
    Floris

  • How to do configuration the Essbase server with shared services

    We install Hyperion 11.1.2, we install Hyperion Essbase server and planning on UNIX box (64-bit) and FR Report, Essbase administration services and foundation services on windows 2008 (64-bit) server.
    When I am doing the configuration on windows server it’s not asking anywhere Essbase server details.
    How to do configuration with Essbase server and planning where these are on Unix box and foundation services are on windows server.
    Help me !
    Thanks
    Dharm

    I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
    C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
    com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
            at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
            at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
    An error occured during the operation. Detailed Message is - reg.properties notconfigured.

  • HT5682 "which is no longer required to configure applet settings." Then how do you configure the settings?

    How do you now reach the Java settings for your machine for things like memory allocation?
    Also, what about 32- and 64-bit architecture? How do I control which is active?

    hello vnsonwu, this sounds like there might be a problem with the file in your profile folder that stores the settings (maybe it is set to read-only or corrupted in another form) - please go through the troubleshooting steps described here: [[How to fix preferences that won't save]]

  • How do you configure the af:query to genterate an IN-Clause

    How do you declaratively create a multi-select vield in the af:query and create an IN-CLAUSE?
    I am able to create a view criteria and I found the "support multi select" box on the UI Hints tab, but when the field is rendered in the af:query the operations list Equals, Contains and others. I expected an in clause operation.

    Check out my blog http://wp.me/pcBZk-5O and also look at the link to Jobinesh's blog too.
    Timo

Maybe you are looking for