How do you connect Airport Extreme and share HP Photosmart 3210 Printer?

Hello,
I have a Mac and PC Network composed of:
iMac 24'' Leopard 10.5.2 (main computer)
2 PC Fujitsu Pentium 4 on Windows XP
2 PC HP Pentium 4 on Windows XP
my network/connections are done via Airport Extreme and 2 hubs (other devices connected to the network like Wii, XBox etc.)
I am trying to share my HP Photosmart 3210 using the USB connector on Airport Extreme but I am experiencing strange problems while printing from the iMac. I can print an e-mail or a "light" document however if I want to print a Mac powerpoint (Mac office) largest document, the problem starts after the second or 3rd page, the printer goes on pause at the middle of the page and the interface indicates "problem communicating with the printer" or something like that.....unique possibility is to turn the printer off and start again but the problem persists. However, it seems that the printer works ok from the PC's.
I have tried to install the latest versin of the HP driver on my iMac but while configuring, the printer doesn't appear....I have checked on the printer settings and the IP address is 0.0.0.0.
I am now thinking about connecting the Printer via one of the Ethernet port on Airport Extreme.
Questions:
1. Any help on the above ? Any advice ?
2. Is it normal to have no IP address on the printer when connected via USB on Airport Extreme ?
3. Why HP config doesn't recognize the printer on the network ?
4. Why does it work from the PCs and not from the iMac and why does it print light documents and not big ones ? Is this a memory7buffer problem on the printer ? What can I do if this is the case ?
5. On the Airport Extreme Utility, do I need to share the printer via "Bonjour"?
6. I am willing to plug an extrenal HD on the Airport Express USB port. Is it possible to put first a multi USB port on the Airport Extreme USB or is it going to cause problems ?
Thanks a lot for your help.
P.
Message was edited by: vador300
Message was edited by: vador300
Message was edited by: vador300
Message was edited by: vador300

NCBob, Welcome to the discussion area!
If I understand correctly you are replacing the Linksys. It should be a simple replacement. Connect the cable modem to the WAN port on the AirPort Extreme base station (AEBS). Connect your Ethernet devices (including the switch) to the AEBS LAN ports.

Similar Messages

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

How do I connect Airport Extreme in place of Buffalo wireless router in Japan?

How do I connect Airport Extreme to replace current Buffalo wireless router? ISP is StarCat in Japan.

Hello DM1960,
Thanks for using Apple Support Communities.
To set up and configure your AirPort Extreme please follow the steps in the article below:
OS X Mavericks: Set up an Apple wireless device
http://support.apple.com/kb/PH14058
Take care,
Alex H.

How can I connect my iPad to an HP Photosmart c309n printer?

How can I connect my iPad to an HP Photosmart c309n printer?

You do not have an Airprint enabled printer. See the attached link for the most current Airprint list.
There are however, apps you can purchase, which will let you print via Wifi to your printer. Check out either Printopia or Print Central in the App Store. Both are about $9 and work well.
http://support.apple.com/kb/ht4356

How can I connect airport extremes using a wired-switch connection and have roaming capability?

My goal is to have 2 airport extremes and 1 timecapule connected via an ethernet switch so that I can enable roaming. I have no problems connecting them wirelessly where I create the wireless network on a primary airport wireless then add the others "extending" the network. However, if I attempt to do the same thing with a wired connection everything stops working (no connections from any airport). Here's the topology I'm trying to achieve. I believe my problem relates to the switch and the fact that I am serving up DHCP from a separate server. Is there a way I can achieve this (or similar) type of configuration? Thanks in advance.
BTW, I have read the various documents on the roaming network topology but none seem to be a match to this.

To answer your question, yes, if I _only_ have the main "create wireless network" airport connected/wired to the switch, everything works correctly.
OK, got that.
Also, if I have each of the 3 airports/timecapsule "create wireless network" using the same ssid name and passwd/protocol, everything works correctly (but of course, no roaming under this scenario
Sorry, you have me confused on this one. When the AirPorts are all configured to "create a wireless network", use the same SSID, security and password, and all AirPorts are in Bridge Mode........that is the exact definition of a "roaming" network.
Not sure what you mean when you say "no roaming" in this configuration.
Also, if I have the main "create wireless network" configured and have the 2 other airports "extend the network" and _not_ have them connected via the ethernet cable, everything works correctly (wireless airport interconnection)
That is correct.
However, if I plug the 2 other "extend the network" airports into the switch via ethernet, all connectivity shuts down.
This is not a correct setup. The "extend" setting on the AirPort assumes that they will connect using wireless. If you then try to connect an Ethernet cable to an AirPort that is expecting a wireless connection, that will result in a big feedback loop and effectively crash the network.

How do I connect Airport Extreme to XBox 360 live

I just bought an Airport Extreme to use as my wireless router. Everything connected beautifully EXCEPT my all in one HP Printer and my XBOX 360. If I manually enter the settings, I can connect but only for a minute or 2. Once my son starts using xbox LIVE, the connection gets dropped. All instructions I can find must be for older utilities. I eventually plugged in my old G Router into an open LAN port on the back of the Airport Extreme and got my printer working when connecting to the old network ID but still can't get XBOX 360 to connect and stay connected. Any help is appreciated.

Ok, thanks for the update. Do you have the Xbox connected to the 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet (wire) or by wireless? If wireless, temporarily connect it by Ethernet to verify that you can get connectivity via this method.
If you were using wireless, which of the following is the wireless adapter that you are using?
802.11g or
802.11n?

How do I connect Airport Extreme to U-verse Internet Gateway: Motorola Model NVG510

I tried to set up a new network with the Airport Extreme and get no Internet connectivity from the AT&T gateway. The Extreme network sets up fine and I can access it from all my devices, but no Internet.
What am I doing wrong?
Thanks,
Mick Jones

It will only take a minute to check the Ethernet cable. Just connect it from a LAN <-> port on the Uverse gateway to the Ethernet port on a computer. Turn off the wireless on the computer and see if you can get a good Internet connection that way.
If you can, great. You cannot, then you either have a bad Ethernet cable or the port on the gateway may not be working correctly.
Power up the AirPort Extreme for a few minutes
Then, hold in the reset button on the AirPort Extreme for 10-12 seconds and release
Allow a full minute for the AirPort to restart
Connect the Ethernet cable from a LAN <-> port on the Uverse gateway to the WAN "O" port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on Other WiFi Devices
Click AirPort Extreme
The utility will open up automatically, take a minute to analyze things, then suggest that the AirPort will be configured to create a new network. The window will look like the example below, except that you will see an AirPort Extreme instead of an AirPort Express.
Network Name......type in a short, simple name that you want to call your wireless network
Base Station Name.....type in a short, simple name that you want to use to identify the AirPort Extreme
Password......type in a password that will be used for both the Base Station and Wireless Network
Verify the password
Click Next
You should have a green light on the AirPort Extreme in a minute or two, and you should be able to log on to the new network and get an Internet connection.

Connecting AirPort Extreme and AirPort Express

Hi, I have a windows 7 pc connected to the internet with a dsl modem/router (technicolor TG587n v3 made by Thomson) and a Mac computer that gets connected wirelessly, but now I have purchased an AirPort Extreme and an AirPort Express and I want to connect the new AirPorts to provide a more stable connection and also to extend the wifi signal and connect a non wifi USB printer to be accessible by the other computers in the household. Would it be possible for someone to spell out all of the steps to be taken to achieve this? Many thanks

No worries. It was all to do with the sequence of events which happened as follows (bear in mind that I'm not a technical person). First of all I've left the original moden/router's connection as it was, then I connected the Airport Extreme to the original modem with an ethernet cable. After this I started Airport Utility and I chose to do a manual setup until it recognised the Extreme, once this was done I plugged the Express to a power point, then Airport Utility recognised the Express and once again I did a manual setup and voila!
The above steps are only a summary of what took place as I did get a little bit confused as the first person that attended to my enquiry was not an expert with creating networks. The second person was amazing knowledgeable.

What cables to use when connecting Airport Extreme and Windows XP?

I have a DSL modem and Airport Extreme. Right now I am getting Internet with the cable plugged into "Ethernet" and is connected to my computer. If I want to connect my Airport Extreme to my computer, where do I plug in everything?
Thank you for your help - I am a complete wireless newbie!

Jgreene19
You don't seem to be making much sense, please can you clarify your network and your computer.
You have a DSL modem with an Ethernet port?
Do you have an Airport Extreme Base Station?
What computer do you want to connect by Airport, your iMac listed in your profile (or as this is an Airport for Windows forum) a Windows PC?
Does this Windows PC have a wireless card or not?

HT2497 can you connect AirPort Extreme to a Mi-Fi unit? currently have one from 3 uk. It's a Huawei E586

hi there, I have an Huawei E586 mi fi unit, can this be used with an Air Port extreme unit in the same way as a router? If so, how do the two units connect?

The AirPort Extreme requires an Ethernet signal at its WAN port.
So, the first question here would be does your Huawei device provide an Ethernet signal that could be sent to the AirPort Extreme?

How do I connect my ipad2 with my hp photosmart c4780 printer?

How do I connect my ipad2 with my HP photo smart C4780 printer?

Sharon-
I don't think that printer is capable of AirPrint. If the printer has WiFi or can be connected to WiFi, you can use an iPad App like Print n Share. If not, you can use a computer program like Printopia to share the printer as AirPrint over WiFi.
Take a look at the free iPad App, HP iPrint Photo. It has some limitations but should at least get you printing.
Fred

How do I use airport extreme to share my (seagate) usb external hard drive

I talked to apple support and I was told it wont work for that but the sales info for the router (in the apple store website) says it is almost plug and play adn will work fro my ,ac or my PC's. I have seen a number of yeah and nays but, REALLY
is it possible
If not why is it one of the selling points
New struggling Mac user

Hello, I have a similar situation of trying to get my Maxtor One Touch4 external HDD to connect to the AEBS for use as a central storage location for files that I can access from my new Mac Mini and my Windows XP laptop. Based on your reply to David's post I wanted to share my experience and see if you have any suggestions.
1. I connected the HDD to the USB port on the AEBS and the drive shows up in the Disk Tab of Airport Utility but I cannot access any folders on the drive.
2. When the HDD is connected directly to my Mini I can access all files on the disk but I cannot save newly created files to the external HDD. In Finder, my HDD shows up in the Device list and if I right click on the HDD and select Get Info this shows my Sharing & Permissions as "read only" for this drive and the "shared folder" checkbox is unchecked. I have gone into System Preferences and turned on File Sharing and I see my name as the admin with read/write permission for this HDD.
3. I'm guessing, based on other posts of yours that I've read, that my situation might have to do with the formatting of my external HDD. It was previously used exclusively with a Dell PC running Windows 7. I will research reformatting the drive but once I do this will my PC laptop running Windows XP still be able to access this drive if it is connected through the AEBS? Also, I may be a bit confused as to how the File Sharing works on a Mac and how it applies to my issue.
Thank you for your assistance.

How do you connect a Mac and PC to the internet?

I have a high speed internet cable modem and wish to grant simultaneous access to the internet for both my G5 and PC. I purchased a router and tried to network through that, but it did not work. I am considering trying a wireless router -will this work?
Is it even possible to route a Mac and PC to the same cable modem?

I purchased a router and tried to network
through that, but it did not work. I am considering
trying a wireless router -will this work?
Is it even possible to route a Mac and PC to the same
cable modem?
Yes, it is possible. How easy it is depends on your ISP.
Some cable ISP providers program your cable modem to talk to no machine other than the one with which you 'registered' with them. That is, the machine the modem was connected to when internet service was installed.
Remove that machine and connect another, no internet.
If thats the case, then you get around it by whats called MAC address cloning. In the advanced router setup, there should be a tab for that very action. Go there, then enter the MAC address of your primary machine.
(You may also have to set DNS and domain names in the basic router setup.)
I know the Linksys web site provides detailed instructions for configuring their routers for a couple of large ISPs.

How do you connect Airport Extreme and share HP Photosmart 3210 Printer?

Similar Messages

Maybe you are looking for