How do you connect an older macbook pro to your TV?

I have an older macbook pro and trying to find out what cable to buy to hook it up to my tv with an hdmi cable. i think its DVI but i dont know if its male, female. any help?

See -> About AirPlay Mirroring in OS X.
And you need to update your system software to Mountain Lion or later.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Similar Messages

  • How do you connect picopix to MacBook Pro, How do you connect picopix to MacBook Pro

    How do you connect a MacBook Pro to a picopix projector??

    Does your new MacBook Pro have the retina display? if so you can get a HDMI to VGA adapter here- http://store.apple.com/us/product/HB416ZM/A/belkin-hdmi-to-vga-projector-adapter ?fnode=51
    It's a bit pricey but should do the trick.

  • How can I connect an old macbook pro...

    How can I connect an old macbook pro with that does NOT have a Thunderbolt connection to a new 27 inch iMac? I only need to do this for one specific purpose, to be able to see the work I'm doing on the laptop in InDesign on the iMac's larger screen (at a larger size as it were, so I can see a double page spread (or even a whole page would be an improvement) in one go)?  I gather it might be possible to get an adaptor but note that Apple don't seem to sell one. I know I could do this with the cinema screen but would rather do it with a new imac as that will have more use to me overall. It's a work laptop which I don't own so I don't own the Indesign to just be able to use that on an iMac. I have tried to connect monitors to the laptop in the past, but with no success at all.  I hope someone can help . Thank you.

    Im pretty sure you are talking about the M8536 which has an ADC Adapter.
    you will have to daisy chain a thunderbolt to DVI adapter with an DVI to ADC Adapter.
    the first adapter:
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
    The second adapter is old so you may find used ones on ebay like this:
    http://www.ebay.com/itm/M8661LL-B-Used-Genuine-Apple-DVI-ADC-Display-Adapter-Mod el-A1006-WORKS-/160901961703?pt=US_Video_Cables_Adapters&hash=item25768117e7

  • How do you iMessage from the MacBook Pro

    How do you iMessage from the MacBook Pro?

    Lord Of The Weirdos wrote:
    And if you don't use that computer often be prepared for the mountains of new notifications the next time you run it.  Especially if your like me and use your iPhone and iPad a lot for texting people.  Wish iMessage in ML would know what you read somewhere else like iPad and iPhone does
    I don't quite understand what you are saying? If i recieve and read an iMessage on the iPhone and then switch on my Mac, I don't get a notification about a new message, but that iMessage appears on the conversation.

  • How do you move iMovies from MacBook Pro to iMac?

    How do you move iMovies from MacBook Pro to iMac?  I started some projects on my MacBook Pro but would rather have the larger working area provided on the iMac large 27 inch screen. 

    Hi there rainyri!
    The easiest way for you to do this is to transfer the information to an external drive as an intermediary, then transfer the information from your drive to the internal drive on your iMac. We have an article that explains the steps for doing this, and it can be found here:
    iMovie '11: Copy or move a project to an external hard disk
    http://support.apple.com/kb/ph2289
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How to connect an older MacBook Pro with mini VGA port to HDMI?

    I have an older MacBook Pro with a female mini VGA port.  I would like to watch movies which have been downloaded to my laptop on my flat screen TV.  Newer MacBook Pros have a mini DisplayPort for which Belkin makes a cable to use; however, I have not been successful in finding either an adapter or converter to use with my older laptop. 
    FYI.  Am currently using Leopard but am upgrading to Snow Leopard.

    I believe you naeed the Apple ADC to DVI adapter.

  • How do I connect my 2013 macbook pro to apple tv

    How do I connect my 2013 Retina Macbook Pro (OSX 10.9.5) to my new Apple TV?  When I try, I keep getting a "Cannot connect" message.

    Welcome to the Apple Community Mary Ann.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

  • How can I connect my new macbook pro to HDTV, either wirelessly or via a cable?

    I just got a Macbook Pro about a month ago and I'm trying to figure out how to connect it to my HDTV. Is it possible to connect it and simply use the HDTV as a display that way?
    Ideally, I'd like to connect it wirelessly, but if not, I understand that a cable should work. I tried to look for a cable from one of the Macbook Pro's ports to the HDMI port on the tv... but couldn't find anything. My old Macbook had a DVI port and I don't think it exist anymore (unless I'm missing it).
    Hope to hear back soon.
    Guy

    If your MBP can use it, I highly recommend the following adapter:
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
    I'd be very surprised if it doesn't have a capable mini DisplayPort, since my not-quite-one-year-old MBP does.  But to be sure, first make sure you've got a mini DisplayPort, then scroll down on the page above and find a user comment titled "How you know if it is supported w/o guessing."

  • How do I connect my defunct MacBook Pro (monitor's dead, HD works fine) to another computer to transfer files?

    I have an old MacBook Pro whose monitor recently died. I took it to the genius bar to get assessed and ended up buying a MacBook Air to replace it. The genius hooked up my external hard drive to the MacBook Pro and did something with the way she started up the MacBook Pro so that I could get my files off of it and onto the external hard drive while it was plugged into another computer so I could see the files there. However, I failed to transfer some files that I really want. Now I'm trying to figure out how to transfer them on my own. And I can't make it work.
    Here's what I have to work with:
    - The monitor-less MacBook Pro, which still turns on.
    - The new MacBook Air.
    - The external hard drive, which I connect to the old MacBook Pro via 6-pin FireWire and the new MacBook Air via a thurnderbolt-to-9-pin-FireWire-to-6-pinFireWire converter.
    Would love to hear your ideas so I can avoid another genius bar appointment if possible (as they take forever).

    "Target Disk Mode"
    FireWire or ThunderBolt, whichever you can make work in common.
    OS X Mountain Lion: Transfer files between two computers using target disk mode

  • How to wirelessly connect MG3120 to macbook pro

    How to wirelessly connect canon MG3120 to macbook pro OSX?

    If the printer is Wi-Fi capable, you have to get it on your home Network.
    It needs to know the network_name and Wi-Fi password, and these need to be entered directly into the control panel on the Printer.
    Once it has joined your network, it will show up under Add-a-Printer.

  • How do I connect a 2013 Macbook Pro Retina to an Epson Power Lite 61p LCD Projector?

    I am trying to attach an Epson PowerLite 61p LCD Projector to my 2013 Macbook Pro Retina, but I cannot find which type of adapter I need. I would assume whichever adapter is required it must connect via thunderbolt. However, I do not know if the required adapter is a "Mini Display Port to VGA Adapter," "Apple Mini DVI to VGA Adapter," or a "Thunderbolt to VGA Adapter." I would deeply appreciate your help and guidance. Thanks!

    It does not matter whether you get an Apple adapter or a third pary one.  What you have there is a Mini Displayport to VGA adapter, but as you know, your new MacBook no longer has an MDP port!
    Thunderbolt to VGA adapters do not exist but there are plenty of HDMI to VGA adapters out there:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812400359

  • How can I connect my old macbook pro hard drive, which has been removed, to a new computer

    I had to remove the hard drive from my 2010 Macbook Pro due to damages motherboard (son spilled apple juice). I bought a new macbook pro and need to pull some data offf the old on. I had the hard drive removed and see the pin connector. What type of cable do I need to connect this via usb, firewire or thunderbolt

    "Newer Technology Universal 5.25/3.5/2.5" Hard Drive & Optical Drive to USB2 Adapter w/Power. Everything you need to Plug and Play any SATA/ATA/IDE/ATAPI Drive via USB 2.0/1.1 port. Fast, Simple, Plug & Play. GREAT for transferring data, etc. (NWTU2NV2SPATA)" - http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/

  • How do I connect my new Macbook Pro to an LG HX300G digital projector?

    I just got this new computer and the connections are different. I realize that we now have thunderbolt instead of the video connection I had on my last MacBook. I have to teach a class on Friday. How can I connect my new computer to the projector? There doesn't seem to be an adaptor cable made for this. The projector is relatively new, expensive, and I can't buy another one. The video cable from the projector is a PC-type thing with two screws.
    Rebecca

    Thanks so much! I found exactly what I need. I just needed the language. I will use VGA for this purpose but might order the HDMI cable too as you never know what you're going to run across with weird equipment out there. I appreciate your help.
    Rebecca

  • Connecting an older MacBook Pro to Current Dual (Mac) Display Monitors

    I am thinking of buying dual displays (24-inch) and I have a MacBook Pro I bought in 2007: It's an OS X (10.4.11). I'd like to be able to connect this laptop to the dual displays, but I've read that there may be issues with connectivity with the "old" MacBook Pro laptops to the new cinema displays — if you are connecting to more than one. If anyone has a MacBook Pro from "long ago" aka 2007 or if anyone knows, would you tell me what kind of connector/adaptor works and if I need any additional cards or anything to make this happen. Thanks a lot!

    If anyone has a MacBook Pro from "long ago" aka 2007 or if anyone knows, would you tell me what kind of connector/adaptor works
    None. The Apple 24-inch LED display can't be connected to a computer which doesn't have a Mini DisplayPort, and only the 2008 Mac Pro models can be upgraded to include one.
    (44216)

  • How do you reset SMC on MacBook Pro

    How do you reset the SMC on a MacBook Pro? I am trying to get rid of that intolerable fan noise and was told this may help.

    I have had problems with a usb device from SONY, and after talking to AppleCare - I reset the SMC - and then the usb device mounted again. But, when I logged in as the normal user - the device did not mount again. Strange. Is there a difference when it comes to user levels?

Maybe you are looking for

  • Access to MySql Database in the Web Service

    Hi all, In my j2me web service project, i want to access to MySql database in the web service and my installation is Tomcat 5.0 for Java WSDP, Java Web Services Developer Pack 1.5, MySql Server 5.0 and environment variables are adjusted... server.xml

  • Execution order in ApEx 4.2.1.00.08

    Hi! If I have Before header Application level process (with id=5) and page Before header process (with id=5), which one will execute first? Is there any relation based on id or there is other logic? I want to understand general order of execution in

  • Unable to connect Forms, Reports to Personal Oracle8i

    Hi everyone I have installed Oracle 8i Personal Edition on Windows 98, and I have installed Oracle Developer. I am unable to connect to the Oracle Database from either Forms or Reports to the Personal Oracle Database. I tried connecting using User :

  • Need fix for db file  sequential read

    Hi all, My db is 10.2.0.3.0 on windows. One of our query is very slow. When I checked for the reason from v$session the wait event is db file  sequential read. Generated ash report and checked. Report listed one file id(p1), block id(p2), and number

  • About goldengate for sql server  ,and from sql server to sql server replication,help!

    IF I config odbc dsn_ggExtdb , when exect this command: DBLOGIN sourcedb dsn_ggExtdb USERID sa,PASSWORD 123456 error :Unrecognized parameter (SOURCEDB), expected USERID. help me!