How do you connect SMS pads to copper areas in ultiboard?

I have a TQFN part with multiple pads. I want to connect the pads to a copper area I have defined. I gave the copper area the same net number by using properties/vonnect to net. Now the rats nest lead from the pin (net 22) goes to the copper area but everytime I try to connect a line to the area it makes a clearance. I can't figure out how to connect the pin to the copper area. I don't want to use vias. Suggestions?

Press the CTRL key while you move the mouse pointer on top of the pad and at the end of the pop-up label you'll see to which net it is assigned, now do the same to the Copper Area just to confirm that it is indeed assign to that net as well. If both are the same net it should connect without voiding.
Otherwise post your file here so we can check it out, if you don't want to post your file, you may instead contact support.
Nestor
National Instruments

Similar Messages

  • How do you connect sequences so that they are smooth

    when connecting sequences how do we make it a smooth transition from one sequence to the next??

    I will try and guess what you are asking about!
    You can make a cut just as if cutting to another clip.  An editor woul ddetermin ethat the last frame of one sequence will cut nicely / smoothly to the next frame of the next sequence.
    But it is likely you are asking about using a transition. between two sequences?
    Cut enough off the head and tail of each sequence so as you have handles to cover the transition duration.   Allow for this in editing the sequences.

  • How do you connect printer to the iPad?

    How do you connect printer to ur I pad?

    You need a airprint enabled printer to print documents directly but there is also an app on the app store called print central pro which lets you connect to any printer over wifi or over google cloud print.
    Hope this helps :)

  • Grandaughter has locked i pad 2 with passcode and then forgotten number how do you reset i pad to get it to work again

    grandaughter has locked i pad 2 with passcode and then forgotten number how do you reset i pad to get it to work again

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • How do you connect edge inspect with chrome !?

    how do you connect edge inspect to chrome

    If you install the Chrome extension then Edge Inspect will syncronize with whichever page is in the current tab.
    =Ryan
    [email protected]

  • How do you connect your macbook pro to a sony bravia tv with a belkin cord????? HELP!!!!!!!!!!!!!!!

    How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.

  • How do you connect two Apple ID's?

    How do you connect two Apple ID's to one another?

    Yes. You can sync multipl iDevices on the same computer using the same Apple ID. You can each have different configurations of apps, books, music, etc. or have identical configurations. In this way, however, your common data - contacts, mail, calendar will be the same on both iDevices.
    The Apple ID doesn't distinguish one phone from another, only how the phone will sync to a computer. The Apple ID is how iTunes knows to which computer a phone syncs. And, the Apple ID determines who is the registered owner of downloaded and purchased items via iTunes.

  • How do you connect ipad 2 to itunes library using home sharing

    How do you connect the ipad 2 to the itunes library using home sharing so you can listen on your ipad 2? I've seen directions for the ipad which tell you how to setup home sharing then open ipod and touch library in the left column, but when I hit library, nothing happens. I'm assuming the ipad 2 has something different about it. Any help would be greatly appreciated.
    Thanks.
    PS, the OS is 4.3.3 (just got it but it's not on the os list)

    See iTunes 9- Understanding Home Sharing and iTunes- Troubleshooting Home Sharing.  Also, open iTunes, select iTunes Help from the Help menu and search for "home shar."

  • HT1555 how do you connect an iphone to be a remote for Apple TV without the apple remote?

    how do you connect an iphone to be a remote for Apple TV without the apple remote?

    you can use the remote app.
    http://www.apple.com/apps/remote/

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How do you connect your iPad to a wireless computer?

    How do you connect your iPad to a wireless computer?

    Your question makes no sense. You "connect" an iOS device to iTunes on your computer via WiFi or by using the supplied cable.

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • How can you connect your iPod touch to your Vista computer without using Apple Software

    How do you connect an iPod touch to your Vista computer without using any Apple products

    There is no other legit way to sync your iPod than using iTunes. There is 3rd party software to transfer content from the iPod to your computer, but not from the computer to your iPod.
    Disk mode is not supported.
    See also: http://www.apple.com/ipodtouch/specs.html

  • I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

    I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

    http://support.apple.com/kb/ts1538

  • How do you connect a microphone to a Mac?

    How do you connect a microphone to the Mac?  I'm trying to record vocals onto Garage Band.  I tried to use an adapter (XLR to MONO 3.5 mm) to connect directly to the port on the side of the MacBook Pro.

    I prefer USB mics - a really cool and nice one that I used to have was the Blue Snowball, available at Amazon for a great price. It got lost in a move but I intend on getting another.
    Clinton

Maybe you are looking for

  • How to monitor a specific transaction in Solution Manager ?

    Hi all, I have configured the Service Level Reporting and it works correctly. But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ? In the SL Reports configuration steps, we can configure this option : Select Business

  • External Hard drive Permissions changed to "read only"

    I use a Seagate Slim Drive (500GB) on my Macbook Pro (Late 2012, Retina, 13"), to store movies and tv shows and whatnot. Last night, I was watching a movie and everything was fine. I ejected the drive after use and it stayed that way overnight. This

  • Exporting correct Hex colors via scripting

    Hello all, I need to export the fillColor of a paragraph style via scripting. I can get the fillColor property of the paragraph style, and can also convert CMYK to Hex. However, I do realize that the color values shown in InDesign are in whatever Col

  • Problem finding object for Custom Object Test

    I need to create a custom object test that tests whether a an element is present after a record gets inserted into the database. The script is databanked and each iteration needs to insert a databanked record, then evaluate my custom object test to m

  • How do i open PDF files in ipad?

    How do i open PDF files in ipad?