How do you connect your iPad to a wireless computer?
How do you connect your iPad to a wireless computer?
Your question makes no sense. You "connect" an iOS device to iTunes on your computer via WiFi or by using the supplied cable.
Similar Messages
-
HT4623 How do you get your Ipad out of restore mode
How do you get your Ipad 3 out of restore mode? I ended up there by mistake.
Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
How do you unlock your ipad without a passcode if it wasnt setup through itunes
How do you unlock your ipad without a passcode if it wasnt setup through itunes
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How can you screen your iPad on a Keynote presentation just like Apple?
Like when they had last years WWDC when they demoed iOS 5 on the iPod Touch 4G
Can you do that with an iPad 2?AL113-
Mirroring refers to normal operation of the iPad, where you can see the Home screen on your external display, as well as when setting up a slide show, et cetera. You may not need to mirror the iPad's display for presentations (but the iPad 2 does mirror). At least for slide shows and videos, the iPad 2's screen does not show the presentation when an AV cable is connected, it only appears on the external screen.
The alternative I mentioned about using the Apple TV box with AirPlay is probably easier to do, except you need the Apple TV box to interface to your external display. One problem with an AV adapter, is that the weight of its cable tends to pull the connector out of the iPad as you are holding it.
Fred -
how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon
To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.
-
How do you get your ipad unlocked if you forgot your password and it became disabled?
How do you get your ipad unlocked if you forgot your password and it became disabled?
The instructions on this page should let you reset your iPad : http://support.apple.com/kb/HT1212
-
How do you connect the iPad too, How do you connect the iPad to apple tv
How do you connect the iPad to Apple TV
On the same network and same apple ID with home sharing turned on they should connect.
-
How can you connect your 4th gen ipod touch to a 3g network?
how can you connect your 4th gen ipod touch to a 3g network?
Yu need a device like the following:
- A MiFi or similar. They are credit-card size devices that act a wifi hotspot and then connect to a cellulare network
- Use a smart phone that can act as a wifi hotspot to share it s cellular connection. An iPhone will also do that via bluetooth. You need to purchase a tethering plan . -
Can you connect your Ipad to a projector using Bluetooth
Can you connect your Ipad to a projector using Bluetooth, if so what projectors, My situation is that I want to connect my Ipad3 wireless to a projector where there is no wifi available so the apple TV and airplay won't work.
No.
If you have an Apple TV, get an Apple Airport Express wireless router which is small enough to fit on your pocket. You can set up a wireless network without having to have internet for your iPad and Apple TV to be connected to.
Or use a wired connection. -
How do you charge your iPads in the classroom?
How do you charge your iPads in the classroom? Is this convenient?
What's the difference between and educator and a teacher? I always called my teachers "Teacher" or "Teach".
Most use a large cart that hold about a dozen iPads and charge them simultaneously.
http://www.griffintechnology.com/business/multidock -
How do you unlock your iPad if you forgot your password
How do you unlock your iPad if you forgot your password
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
How do you restore your iPad on the new iTunes
how do you restore your ipad on the new itunes
Hi,
From view menu, you can select show duplicate item. If you hold option key whilst selecting view menu, show exact duplicates becomes available.
Jim -
How can you find your IPAD serial number in your itunes account if you have lost your IPAD
How can you find your IPAD serial number through your itunes account if you have lost your IPAD
If you registered it to your account then it should be on your support profile : https://supportprofile.apple.com/
Or if you have a backup of it on your computer's iTunes then go into Edit > Preferences (iTunes > Preferences on a Mac), and on the Devices tab hover your mouse pointer over the iPad's backup : -
How do you name your iPad 2?
How do you name your iPad 2?
Presuming you're referring to deciding on a name, assemble all family members who need to be consulted on this important decision. Then put forward various names (snowball, fluffy, hairy thunderer, cosmic muffin) until you find one that everyone is comfortable with. Then follow Dave's instructions (above).
-
How do you connect your iPhone to a mac so the calendar gets updated wirelessly
How do you connect your iphone to a mac so the calender gets updated wirelessly?
If you mean using iCloud, you go to Settings>iCloud on your phone, sign in with your Apple ID to create your account, then turn Calendars (and anything else you want to sync with iCloud) on. Then on your Mac, go to System Preferences>iCloud sign in with your iCloud ID and check Calendars (and anything else you want to sync with iCloud).
This requires iOS 5 or higher on your phone and OS X 10.7.5 or higher on your Mac.
Maybe you are looking for
-
How do I stop Launchd from opening so many other processes?
My computer has been running slow for some time even with without any applications open. On a whim, I created a new login account and it runs lickety split. I compared the Activity Monitor of both accounts and the old account is running 40 other proc
-
My device wont come up when i plug it into my computer
When i plug my 4S into my computer it doesnt conect with my itunes. How can i make itunes be able to read it?
-
Java Webconsole ELResolvers for JSR not registered with the JSP container
Trying to rebuild a LDAP server running Directory Server 6.1. Just installed Solaris 10 u9 on a SunFire V240. Loaded most recent recommended patch set dated 2011.02.02. Proceeded to load Directory Server V6.0 from native packages using JAVA ES Instal
-
International letter versions of letter a not working
Seems the international letter versions of the letter a is not working properly on my Ipad. If capital letters it works. Other international versions of letters seems to work ie. Letters e and o etc. Have tried in several different programs and no lu
-
What is the Action account type to be created to Workgroup agents in SCOM for monitoring them
Hi All, I have newly deployed 20 Workgroup Windows server 2008 R2 DMZ machines in our SCOM 2007 R2. We have deployed it using certificates and ever thing is working fine except for the below. I keep getting the below alert saying "Run as account logi