How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file)

How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file). Also, my client is having a hard time making an omf that Pro Tools can read. The files can not be found by Pro Tools. How do you make an omf that Pro Tools can read?

Multichannel export;
http://strypesinpost.com/2012/11/exporting-multichannel-quicktimes-in-premiere-pro/
When you export the OMF, select Encapulate Files in the Settings window

Similar Messages

On itunes 10.3.1, how do you consolidate music albums

on itunes 10.3.1, how do you consolidate music albums

If you mean consolidate in the iTunes sense of the word, "create a copy anything that is outside of the designated iTunes Media folder into the folder and link iTunes to the new copy" then select some tracks, right -click on them and click Consolidate Files... or for your whole library use File > Library > Organize Library > Consolidate files.
Note the above process makes copies of your files. Depending on how much needs to be consolidated this can consume a considerable amount of disc space. You should always maintain a backup of your media, but if you want to consolidate without this side effect then use my script ConsolidateByMoving.
If you mean "putting broken up albums back together" then generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

How do you display exact duplicates in Itunes 11. It is now missung under the file?

How do you display exact duplicates in Itunes 11. It is now missung under the file?

Right-click on this direct link to ExactDuplicates and "download" or "save link as..." to a location of your choice. Double-click to the file to run it. You should get something a bit like this:
If your system will allow it my script will produce a progress bar so you can see what is going on, otherwise you will have to be patient, it will carry on working in the background.
After scanning for duplicates it then adds them to a new playlist. For large libraries this process can be quite slow. (Very slow if you also have old hardware like me.)
Finally you'll get a results window like this (from a different test run, as I didn't have time for the full one to finish when I was grabbing screenshots).
You can use shift-delete to remove selected tracks from the library as well as the playlist. Leave at least one track behind from each repeated group and don't send anything to the recycle bin unless you are sure you have more than one physical copy.
The DeDuper script has several advantages over cleaning by hand. Automating the process allows preservation & amalgamation of ratings, play counts, playlist membership, etc. See this thread for more detail.
tt2

How do you consolidate a downloaded albumn. Sometimes they spit into several pieces.

Sometimes different artists are featured on the same album. The downloaded albumn break into pieces. How do you consolidate?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

How do you black out video w white titles showing audio playing ,than slowly fade to reveal video

How do you black out video w white titles showing audio playing ,than slowly fade to reveal video

From the Transitions browser (far right of iMovie's window, shaped like an hourglass), drag the Fade to Black transition to the gap between the Title and video thumbnail. Alternatively, drag the Cross Dissolve transition - rather than fading to black, the image will gradually transform from the Title to the video.
Double-click the transition to open the Inspector - you can change the duration there if preferred.
John
PS. Re-reading your question, if the video is continuous with a Title inserted, you will need to split the clip at the point where the Title ends, then drag in the transition. To split the clip, right-click (or Control-click) at the split point then select "Split Clip" from the pop-up menu.
Message was edited by: John Cogdell - added PS

How to arrange photos acoording to time of exposed, taken by 3 photographers dumped in one file ?

How to arrange photos acoording to time of exposed, taken by 3 photographers dumped in one file ?

Hi Tim,
Thanks for replying. I have looked for "PDFBookBinder class" in xml publisher user guide for ver 5.6.2. I didn't get any reference of this text. Can you please guide me to a tutorial/link where i can get more information about this class.
Also, i originally thought of similar to your second logic, as my design basis. Oracle process generates the xml file in output directory which i can get. What i didn't get is how do i "pick them up and merge" using publisher. Also, is there way to do this merging process using pl/sql ? Can you please give little more information on your second approach.
My original plan of action is that i will create a report set in which i will call oracle seeded report for all 7 payrolls in a sequential manner. Then using the child requests of the report set i will get to 7 xml files generated by seeded oracle process. Then the piece i am not sure of , i will use those 7 files to generate a single xml file having payroll name as tree top for each output. Once single xml is ready, i can easily design a template and register the process to generate output as Excel.This process will not require me to actually change any data or do any calculation. It will only reformatting the feilds we see and abiity to see all 7 payroll at one time rather then entering these numbers manually into an excel to do analysis.
Please provide your feedback, if you think above plan is not feasible or need corrections.
Best Regards,
Ankur

How do you reset the dlsmusic device or make it visible in order for other programs such as Sibelius or Finale be able to use it?to be visib

How do you reset the dlsmusic device or make it visible in order for other programs such as Sibelius or Finale be able to use it?

I figured out that if you remove the ~/Library/Preferences/com.apple.symbolichotkeys.plist file and restart, that restores the keyboard.
Second question: Is there any way to make F4 (without holding fn) bring up Dashboard on Lion that doesn't require FunctionFlip? If it matters, I have a Time Machine backup of the symbolichotkeys.plist file from when I had the older keyboard.

How do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!

how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)

Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.

HT2486 How can you put same contact in a Group multiple times so that you can print the same mailing label multiple times?

How can you put same contact in a Group multiple times so that you can print the same mailing label multiple times?

Hello,
Avery...
https://discussions.apple.com/thread/2588943?start=0&tstart=0
Or...
http://www.belightsoft.com/products/labelsaddresses/overview.php

Is it possible to make master pages with several title in one file? & Can I define page range from

Is it possible to make master pages with several title in one file? & Can I define page range from which page to which should be specific title?

While the number of master pages is not unlimited, you can have quite a few in any file. I've never seen the limit documented, but it's in the hundreds, or more likely thousands. There is, I believe, a page limit of 9999 pages per document, but I don't know if that includes the masters or if they are counted separately.
You can choose a page range in the Pages panel, then assign a master to them manually, and I beleive there are some scripts floating around that can assign a master page based on the appearance of a paragraph style (for chapter start pages, for example).

When I import .mts files into Premiere 7 the audio is intermittent?

Good afternoon. I am new to this forum and your help would be appreciated. I have recently purchased a Sony Hard Drive Camcorder X105E and I have done my first filming. When I import the files into Premiere Elements 7 and preview them the audio is intermittent on playback. What am I doing wrong cause I cant figure it out?
Thanks in advance for your answers
Regards
Edenr1

OK, on the I/O, you have one, nicely sized, physical HDD. You don't have it partitioned, do you?
With one physical HDD, so many things are happening at the same exact time:
1.) your OS is reading/writing to it
2.) your program is reading/writing to it
3.) your media is being read from it
4.) your OS's Virtual Memory is probably being used, so it's reading/writing to it
The problem is that all of these (plus possibly some other programs/Processes) are fighting to get their data handled at the same time. Each is telling the HDD that it needs the heads in one place on a platter. Same for the next program, and the next. Unfortunately, regardless of the speed of the HDD and the speed of the controller, the heads can only be in one place at one time.
Especially for the Audio (that is more I/O intensive, than the Video usually is - it taxes the CPU much more), you will benefit from more physical HDD's.
I just posed an ARTICLE in the Tips & Tricks sub-forum. It links to two articles by Harm Millard. His article on HDD setup is a gem. Now, it takes things to a professional NLE level, and few are quite ready for that, still the info is good. Much can be extrapolated from his suggestions. Though he lists the ultimate Video editing setup, many concepts can be applied on a smaller scale. You might want to read over the linked articles. They will give you some things to think about.
Also, I just saw an ad for a 1TB WD ATA-300 HDD for US$ 79.00 at Fry's Electronics. While you may need an ATA-100, this shows how far prices have fallen. I've got an ATA-100 1TB, to augment my 4x1TB SATA II's, and it's not that old. I paid US$ 400 for it! Should have waited, but then I've used it for the last year, so all is not lost.
Good luck,
Hunt

How do you change project settings on Premiere Elements 12?

I have Premiere Elements 12. When I view a DVD I created of wedding photos, the edges of people and objects are jagged and generally the photos appear blurry. On my old Premiere Elements 8, I did not have this problem - the pictures on DVDs were clear and sharp. When checking the project setting on Premiere 8, the project settings for Capture was DV which changed all my settings for General and Rendering project settings. On my new Premiere 12, the Capture setting is HDV and I cannot get the General and Rendering settings to change when I change the Capture setting to DV. The online help from Adobe says to correct this, "In the New Project dialog box, click Change Settings," but when I start a new project in Premiere 12, "Adobe Premiere Element Editor" is the only dialogue box that shows and I cannot see a change setting button. Does anyone know how I can change my project settings so that when I select DV it will change all the presets for the General and Video Rendering settings?

jacquelinebaker
The party line is that you cannot change project settings once the project settings have been set. You need to start a new project.
Edit Menu/Project Settings/General does not offer the opportunity for any significant project settings change in this type of situation.
I have discovered that, under certain circumstances, that the user can change the established project preset without starting a new project.
The approach to doing this involves editing the Notepad document of the saved closed project file (project.prel file). I have written about this in the following blog post.
http://www.atr935.blogspot.com/2013/05/pe11-changing-project-settings-without.html
You need to weigh the pros and cons of going through the procedure or just starting a new project and start the project again.
All of the above being said, on to setting to the correct project preset to match the properties of your source media. Please refer to the issues involved and how to set manually the project preset when the program is not doing the job correctly or best automatically.
http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
To the specifics...if you are doing DV data capture firewire into Premiere Elements 12 Capture Window, the scenario would be...
a. Open Premiere Elements 12 to the Expert workspace, go to File Menu/New/Project and Change Settings. In Change Settings,
change the project preset to NTSC DV Standard or NTSC DV Widescreen depending on NTSC or PAL set up and 4:3 or 16:9 DV data source. Then before you exit that area, make sure to place a check mark next to "Force Selected Project Setting on This Project" in
the new project dialog. Exit that area and return to the Premiere Elements 12 Expert workspace for your Add Media/DV Capture selection.
If you are doing HDV data capture firewire into Premiere Elements 12 Capture Window, then same scenario except the project preset change involves NTSC HDV HDV 1080i30 (if NTSC). In this instance, the Edit Menu/Project Settings/General should look like
Please review and consider and then let me know if I have targeted you question or need clarification.
Thank you.
ATR

How Do you import C100 footage into Premiere Pro CC

I just tried importing Canon C100 footage into Premiere Pro CC, but get no sound. I'm not sure what I'm doing wrong and I pray I don't have to convert this footage before bringing it in. Is there a workflow anyone can recommend? Do I have to convert the footage first? Thanks, Lucian

Lucian,
PrPro should work natively with the Canon C100 footage ... it works with almost everything out there. And with the C100 shooting MP-4, AVCHD, & H.264, those are all handled easily by PrPro.
My question ... I would surmise (from what little info you include) you are shooting AVCHD? The reason I say this is that format splits audio & video into different files ... so it's a bit trickier to "import" than others that have the a & v in one file. Make sure you copied the whole top-leveL FOLDER and all sub-folders (not just the footage or contents of a folder) from the cam/card into the computer for AVCHD ... and then when you import into a project via the media browser your audio & video should be all connected by PrPro.
There have been numerous threads here where AVCHD users have "lost" their audio, only to find they'd simply left it behind by NOT copying all the folders & subfolders their camera had created.

Premiere pro: multiple audio tracks in a single take. (Workflow for audio mixing outside premiere)

Hi I am an editor from Finland.
I need to sync multiple audio tracks (like 2 stereo and 4 mono) to different takes before i start to edit. You see, after the editing I will create an OMF file for the sound editor who needs all the audio tracks to work with. I have noticed however by just nesting (puttin video and audio clips in a single sequence) the resulting sequence placed on in the main sequence is flattened into stereo (not multichannel). You see my problem here? I am surprised, because i have always taught that this is a very normal workflow and so far i haven't found a single tutorial or a guide for this problem.
Just to make sure we're on the same page: I know how to sync video and audio, just not so that the 6different audio tracks in all my 120 different takes that i edit into a single sequence will have the 6different audio tracks in the audio post production (which is done in protools, maybe...)
Oh yeah, Premiere Pro CS5

Hi!
This is the case when i get a master clip with all the audio tracks in it. I however got separate files, a bunch of different video files (with stereo track), for every take a boom mic audio track, and a few tracks for all the microphones on the actors. Now after i import these into premiere, how will i proceed so that after i have synced all the audioclips to all the video clips (by nesting?) I will still have all the audio clips intact in the OMF file I will create.
Last time i created omf, all the clips had turned into stereo because of nesting. Is the only way to avoid this by joining the video and audio clips into multichannel audio clips with another program before importing into premiere?
I am not very good at explaining... Problem: I get a video and 10 audio tracks. I join them by putting them into a sequence. I repeat this about a hundred times (for every take). Now i start to edit. I create the main sequence in which i clip pieces from all the hundred takes. In the main sequence the clips have only one stereo track. When the movie is finished I create an OMF for the sound guy. The sound guy asks me why are there only 2 tracks per clip? Where are all the 10 separate audio tracks?

How do you format cell size in numbers for multiple cells at the same time?

How do you format the cell size of multiple cells at once in numbers?

select the cells you want to format by clicking at the top-left most cell, then shift click the bottom-right most cell.
Then open the inspector by selecting the menu item "View > Show Inspector", then click the table inspector segment:
now use the row height and column width fields to adjust as needed.
You can also select multiple rows and columns by clicking in an active tables row/column header, then dragging to select rows (or column), then hover the cursor on the line the separates rows (or columns) until the cursor changes to a bar with arrows, then click, hold, and drag as needed.

How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file)

Similar Messages

Maybe you are looking for