How do you convert a black and white photo to color on the iphone

please tell me how

Hi,
Are you sure that you are using Photoshop Touch and not Photoshop Express? We do not support the iPhone at the moment.
If this is an Photoshop Express issue please let me know so that I can move this to the right forum.
Thanks,
Ignacio

Similar Messages

How do you invert a black and white photo image on a Mac?

I have some glass plate black and white negatives that I would like to scan into my Mac and then invert the images to generate the photo. I have Aperture installed already but I can't seem to just have it invert the scanned image. Is there another way to do this with just the photos? I can't seem to do it with iPhoto or Preview either.

William answered this already, but since I made a screenshot, I don't want to waste it:
Set the "Range" to "Normal" before you drag the control points on the RGB curve up and down. That is easier,when inverting the curve. It tends to wiggle, and "Normal" will constrain it to the range you want.
After you defined this adjustment for one of your scans, lift and stamp it to the other scans or save it as an effect from the "Effects" panel.
Then you only have to adjust the curves once.

How do I get a black and white photo in Photoshop Elements 11?

I have a very old version of Photoshop, release 6 I believe. In that release, I am able to use enhance/brightness and contrast, and when I slide the contrast to 100%, I get a pure black and white image of my photo. I Photoshop 11, which I just purchased today, I am unable to get a pure black and white image, only grayscale. I cut pictures out of wood, and it's fundamentally necessary that I can contrast pictures into pure black and white. How do I do that in Photoshop 11? The first screenshot is what I need in Photoshop 11, the second screen shot is the limitation I'm seeing in Photoshop 11. How do I get a black and white photo??

(I edited this reply because I originally couldn't see the screen shots.)
There was a change made a few versions ago where Brightness and Contrast were improved so that they did not clip values so quickly. This was intended to improve how Brightness and Contrast worked for photographs, but it makes it work less well for purposes such as channel manipulations or printmaking.
In Photoshop there is a Legacy check box in Brightness/Contrast to make it work the "old" way when that is desired. It looks like that check box isn't in Photoshop Elements, which is what you're actually using. I'm not sure if there is a way to get the Legacy behavior in Elements, so you'll want to ask over in the Photoshop Elements forum.

Black and white photo with color

how do I leave color in a black and white photo ?

There are several ways, here is one:
Open picture file
Duplicate the background layer
On the background copy layer, remove the color (Enhance>convert to black and white)
Apply a mask to the background copy layer
Paint with a black brush where you want to reveal the color. If you go too far, correct with a white brush.

How do i colorize a black and white photo?

I have an old black and white photo of a family member I would like to colorize. how is this done? ? I am new to photoshop.

Is this a scanned image? If you have a grayscale image you have to do it manually using a brush tool and choosing colors with the color picker.
If the image was originally RGB and converted to B&W then it’s possible to use:
Enhance >> Adjust Color >> Hue/Saturation
There is a colorize checkbox and you can simply adjust the sliders for an overall color change.

Black and white photo with color added back

I want to be able to turn a photo black and white, then add color back in, say for instance a ball turned back to red only. How can I do that in elements 11? It's driving me crazy! Help

You need to duplicate your color photo.
1. Open your color photo in PSE11 Full Edit expert tab (A raw photo will open in camera raw so click the open image button too send it to the PSE interface)
2. On the Top menu click Layer >>Duplicate Layer >>OK
3. On the top menu click Enhance >>Convert to Black & White >>OK
4. If you can’t see the layers pallet to the right click Window >>Layers
5. In the layers pallet click add layer mask (the icon with a small circle)
6. Make sure your foreground color is set to black then select the brush tool
7. Click the mouse over the area where you wish to reveal color and use like an eraser to reveal the background below
8. To correct errors switch the foreground color to white, then switch back to black and continue
9. Save as PSD to preserve your layers and if you wish make a jpeg copy from the PSD file using File >> Save As
N.B. if your brush is too big or too small you can use the square bracket keys to adjust the size up or down.
The smart brush tool has black & white options but it does involve making selections which can be more tricky than using the ordinary brush.

How do I make image backgrounds black and white while maintaining color in the foreground objects?

I have a close up close-up image of an orchid with blurred background. I am trying to make the background black and white while maintaining the foreground color on the petals, buds and stems. Any ideas?

Use the Blank & White Brick and either brush the effect onto the background or brush is away from the foreground. "Detect Edges" will help control the edge of the mask.
You might be interested in knowing that you can brush on/away masks of different strengths, and thus produce effects in between 0% and 100%.
Search the forum -- there are several good posts detailing how to create this effect.
Sample search.
Message was edited by: Kirby Krieger -- added sample search.

How do you apply a black and white image sequence as an alpha layer to another image sequence

I have a 3D render I'm compositing in AE CS3.
Everything is rendered as image sequences, and I have an alpha pass. How do I apply it to my master layer?

Nevermind. Todd Kopriva answered the question here:
http://forums.creativecow.net/readpost/202/877498

Why does black and white photos appear color on my pc?

When using camera filter, my pc photostream shows only color. How can this be corrected?

HFS+ is also known as Mac OS X Extended. The following is from TEXT:
+HFS Plus or HFS+ is a file system developed by Apple Inc. to replace their Hierarchical File System (HFS) as the primary file system used in Macintosh computers (or other systems running Mac OS). It is also one of the formats used by the iPod digital music player. HFS Plus is also referred to as Mac OS Extended (or, erroneously, “HFS Extended”), where its predecessor, HFS, is also referred to as Mac OS Standard (or, erroneously, as “HFS Standard”). During development, Apple referred to this filesystem with the codename Sequoia.[3]+
Disk Utility uses the term OS X Extended.
OT

How to convert a black and white tif image to colour

I want to convert a black and white tif image to colour. I opened it in Photoshop, changed the mode to RGB colour/8, saved it as psd, but when I use the Replace Colour dialogue box, I just get my colour showing as grey-scale. What’s the correct way to proceed?
Thank you

What’s the correct way to proceed?
Joke?
In Photoshop there are often more ways than one to achieve a task and none of them need be considered »wrong« as long as the result fits the intention, so »the correct way« seems to be problematic terminology.
Anyway, one can use a Layer set to Blend Mode Color and paint on that with whatever colors.
Or one can use Solid Color Layers set to Blend Mode Color.
Or Hue/Saturation Layers …
To edit contrast if necessary Curves or Levels Adjustment Layers can be employed.
You could also have googled »photoshop colorize black and white« …

PSE Elements 9-convert to black and white not working.

I recently bought my wife a new HP computer with Windows 7 64bit and Photoshop Elements 9 to go with it. She has not had any problems up until today.. It seems when she attempts to convert a picture into black and white, photoshop freezes up. Sometimes it will convert the image but most of the time when you go to Enhance--convert to black and white, the little photo of what you want to conver that is on the right hand side of the screen just fills up with dots and then nothing appears on the work area.At that point you cannot close the application or anything else with out Ctrl.alt,delete. I have tried to change the programs compatibility to Windows Xp service pack 2 and 3 as well as running as admin but it does not fix this problem. As far as I know this only occurs when she tries to convert photos to black and white. What can we do? Is PSE9 not compatible with Windows 7 64?

Suggest that you delete preferences:
Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
Press and hold Alt+Control+Shift immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file.
A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help.

How can I print in black and white only directly from apps on hp screen?

My printer preference from my pc is set to print in black and white from my computer. How do I set the same black and white settings from the HP Photosmart Plus printer, when printing directly from Apps on Home screen?

Hello AdrianaSFleury,
At this time there is not an option or a default to set black and white only from the front panel of the printer. Some applications may give you settings in the Application itself for color or black and white but that would be the only place to change the color of the document/photo for your print jobs.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
(Although I am employed by HP, I am speaking for myself and not for HP)

HT4356 How do I AirPrint in black and white from my iPad so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white.

How do I AirPrint in black and white from my iPad2 wifi/3G so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white. I have an Epson Workforce 845 printer.

There is no option to force black and white ouput.
You can request the feature here:
http://www.apple.com/feedback/ipad.html

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I amusing elements 12.

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I am using elements 12.

oesrowstreasurer
Please clarify your "Elements 12". Is that as in Photoshop Elements 12 (photo editor) or Premiere Elements 12 (video editor). And, on what computer operating system is the program running?
Your question is pointing to Photoshop Elements 12 and that you have posted in the wrong forum. If this is a Photoshop Elements 12 question as I believe it is, please post your thread in the Adobe Premiere Elements Forum using the following link provided for your convenience
https://forums.adobe.com/community/photoshop_elements
The alternative is to wait for a moderator to see your thread here and move it from here to the Adobe Photoshop Elements Forum..
We will be watching for a confirmation on what program you are using.
ATR

Why when i convert to black and white and change, contrast, exposure etc and get it right in preview i open it and its brighter and looks different to the preview?

The images also look different in preview and when i upload them to adobe Revel but when i put them back in photoshop they look Ok.

I convert, in raw to black and white and add sharpness and clarity theirs and a few other options Temp etc if need be. Then i open them into photo shop as black and white. There i place around with the exposure setting but as you do it you have the preview button clicked so you see what the finished photo will look like. When i hit change normally the photo changes and looks like it was in the preview.But now with out changing any settings in photoshop, as i change the photo the preview is different when i click ok to make the changes. This comes and goes in photoshop and its getting a bit frustrating as i do a lot of black and white photos and have been doing for years but i am having this problem over the last 6 months.
No i haven't changed colour settings i have photoshop on the preset settings.
'Preview" when you are changing contrast etc their is the preview option so it shows in photoshop what the changes will be. But what i see when i am changing it is different when i open it. make be a point brighter or not as contrasty as i see it as i am changing the settings.

How do you convert a black and white photo to color on the iphone

Similar Messages

Maybe you are looking for