How do you convert several videos at a time?

how do you convert several videos at a time in itunes or whereever you can convert several at a time? because videora doesnt really work for me.

exactly what the subject says:
how do you convert several videos at a time in itunes
because i have a very slow computer so it takes over
and hour then right before its done it freezes. im
getting really mad because i downloaded videos and
now i cant figure out how to put them on my ipod.
Select all the videos you want to convert, right-click and select "Convert Selection for iPod".
You were using external software last time you were here.

Similar Messages

How do you convert camera videos to iPad

How do you convert camera videos to Ipad2?

Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
 Cheers, Tom

How can you collapse several video tracks into one track?

Hi, I have a stack of five video tracks that make up an identification placard for a speaker. I need to create motion on this, but don't want to have to do it to every track individually. I believe there is a way to incapsulate all five tracks into one track. Does anyone know the method of doing this?
Thanks so much, Bob

Select the tracks and type Option - C, or go to the menu Sequence > Nest Item(s).
That will nest the tracks in to one clip on your timeline. If you need to make changes in the nest, double click on the nested clip in the timeline and it will re-open the tracks that have been nested.
MtD

How do you convert Flip Video Mino HD for Final Cut?

What is the best way to convert a Flip Mino HD file for use with Final Cut Studio?
Am working in DV/NTSC 16:9

Or use Compressor.
Create a preset for the output settings you'd like, drop in the file(s) and let Compressor via Quickcluster chew away at the material while you do something else.
x

How Do You Convert a DVD video to an mpeg video?

I was just wondering...how do you convert a DVD disc that has videos in it and make it into quicktime mpeg videos that can make the computer understand?

Hi Ryan.
The FREE program HandBrake will convert DVDs or just sections into mpeg4 files. They can't be imported directly into FCE but they can be imported into iMovie.
Then you just copy the iMovie files into FCE.
Download it here:-
http://handbrake.m0k.org/
Ian.

How do you convert the audio from a mpeg4 video file to mp3?

How do you convert the audio from a mpeg4 video file to mp3 format?

Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.

We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube?

We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube? The Moodle upload interface is expecting a file selection dialog box like windows or OSX. I do not want to have to go through an intermediary step of messing with a pc.
Thanks!

It should be around 7 and a half gigs. In iTunes, across the bottom there should be a bar that show how much storage is being used and by what. (music, movies, apps, etc.) To make music take up less room, you can check the box to make it convert the music to 128kbps AAC. This lowers the quality, but with most earbuds and speakers, you can't even tell the difference.
The iPod touch has parental controls built in. You'll find them in Settings. I think they only work for enabling/disabling Safari, Mail, YouTube, and App Store. Here's an app that does more: http://www.mobicip.com/online_safety/ipod_touch

How can I convert DVD- video into Apple's format so that it can be played and streamed from my Mac?

How can I convert DVD- video into Apple's format so that I can play the content on my Mac and also stream it to my Apple TV? A few years ago, I transferred all of my home videos onto DVD but now would really like to put these onto my Mac and stream them through Apple TV to watch on the "big screen". Any advice would be most welcome!! Thanks

MPEG Streamclip.
Apple do not have their "own" format. You need to convert your DVDs to H.264 though.

How do you convert channels.dvb to channels.conf

Title says is all. How do you convert the kaffeine file channels.dvb to a channels.conf file which can be used by mplayer.
The winterhill transmitter in the UK is now totally digital, since the change over I've not been able to get BBC channels properly in mplayer. The receiver is a Freecom DVB-T USB. I've manually edited the uk-WinterHill file with the transmitter info to update it and used it to create a channels.conf file.
scan /usr/share/dvb/dvb-t/uk-WinterHill > /home/~/channels.conf
This picked up pretty much all the channels & I can tune into BBC channels but receive no picture. I've googled a bit and it seems other people have this problem too and they think it's a problem due to the increased power of the signal after the change over to digital. I've tried a variable attenuator which did no good.
I've now found that kaffeine can scan for and find the BBC channels AND it can also play them back properly. So the theory about the signal strength being too much for the freecom sticks attenuator is probably a load of guff, at least in my case.
The data for BBC One from the kaffeine channels.dvb is:-
TV|BBC ONE|101(2)|102(eng),106(eng),|0|4168|4168|Terrestrial|802000|0|v|-1|-1|-1|-1|8|-1|-1|-1|45|105(16)(1)(1)(eng),||9018|-1|0|
The same data from the mplayer/scan channels.conf is:-
BBC ONE:802000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:101:102:4168
I really don't want to keep kaffeine installed and any links or info that would help convert these channel data files would be greatly appreciated. Seems there are ways to convert them the other way round, but so far I've found nothing to do it fron channels.dvb to channels.conf
Last edited by Nixie (2009-12-17 08:42:56)

Do you want to capture a single frame of the video as a separate image? You can play the video full screen in QuickTime, pause it at the appropriate frame and take a screenshot using shift-command-3.
Matt

How do you add a video on i-pod after you set it to manual

How do you add a video on i-pod after you set it to manual and not erase a ton of stuff in the process?
Thanks

after choosing the manually manage your songs you will not be able to add videos by clicking "update". all you going to do.. after converting videos compatible to ipod video, click your ipod on the left portion of the i tunes it will immediately show your songs from your ipod then drag the selected video from its folder to your i tunes just like adding songs to your ipod

HOW DO YOU CONVERT IPHOTO 8.1 TO APERTURE FILE FORMATT

how do you convert iphoto 8.1.2 photos to aperture file formatt?

I believe this is still possible if the iPhoto library has not been up graded.
No joy, Frank. This is what I get, when I try to import an older iPhoto Library into Aperture 3.4.3 using "File > Import > Library":
Aperture 3.4.x insists on the library being converted to 9.4.x. To be able to import earlier iPhoto Libraries you would have to fall back on Aperture 3.2.x; temporarily install a second, older Aperture version, create a new Aperture library with this version, import the iPhoto Libraries, then open this Aperture library in Aperture 3.4.3 to convert it to a current version.
bertpa, how many iphoto photos are we talking abourt? If you are having several iPhoto libraries with thousands of edited photos, it really would be worth it to upgrade to iPhoto 9.4 to convert your libraries. iPhoto 9.4 will convert your library to a format with Master-version pairs like aperture uses. If you import this to Aperture, you will be able to import each edited image as a single image with two versions (original and edited)- importing from previous iPhoto versions you would be importing each edited image as two separate images - an edited image and the original. This would be wasteful, if you have many photos in Aperture, and it would cause a lot of additional work to get these duplicates sorted out. But if you only have a handful of iPhoto images, launch iPhoto and use the "File > Export" command to export your photos from iPhoto to a folder. You will have to do it twice - once to export the originals and once to export the edited versions. Then import your exported iPhoto photos into Aperture.
Regards
Léonie

How can I convert Itunes video albums tracks to ipod tracks

How can I convert Itunes video albums tracks to ipod tracks?

3pg is an odd format... That or I just never seen it before. :P
iTunes just ***** at converting videos. So far all videos I tried converting with iTunes have resulted in the same error you got.
You're better-off using 3rd party apps, and then copying to iTunes, and then copying to the iPod.
Unfortunately I don't know of any conversion programs for Windows.
If you by chance have a mac, this program works great: http://www.apple.com/downloads/macosx/video/flv2itunes.html
The mac version of Handbrake below works great, hopefully the Windows version does, too:
http://handbrake.fr/?article=download
When converting with handbrake, make sure to use the iPod preset for the out-put video.
Hope this helps a little.

How do you import a video file that has extension gp into i movie. also rotating video

How do you import a video file that has the extension gp into ivmovie? Also how do you rotate a video . (the video was taken from a phone.)

Hi, your video file needs to be converted to eg. a .mov or .mp4 file before iMovie will recognise. I use 4Media MP4 converter and it works excellent.
For the rotating I do not have an answer, but if you would manege you would end up with a very narrow image either way.
Good luck

HT3775 how do i convert my video then?

how do i convert my video's to a format mac supports?

You will have to provide some more information on your videos

How do you convert a PNG File to PDF?

How do you convert a PNG File to PDF?

There are several ways, including ... Right click the .png file in Windows explorer and select Convert to Adobe PDF. Or, click Create PDF on the Acrobat welcome screen. Or, in Acrobat, File > Create > PDF from file

How do you convert several videos at a time?

Similar Messages

Maybe you are looking for