How do you convert the events on iCal to a word document?

I really need to convert my calendar over! Please help

have you tried doing it from within the word document?  in Word, chose insert>photo>and see if you can do it from there.

Similar Messages

  • HT3825 so how do you convert the raw files to jpeg in iphoto?

    how do you convert the raw files to jpeg in iphoto?

    Many thanks Barbara and dj_paige.
    What I didn't mention is that I'm using PSE 5 with ACR 4.6, if its relevant.  I'm thinking of updating to the next version when its out in the hope that it will run with Windows 7 64 bit or I may go to Lightroom.
    I can now see that I can batch convert a whole folder of files using "process multiple files" as dj_paige suggested but that is too many at once as the settings I choose won't be relevant for all the pics in the folder. 
    I was hoping to batch convert say 5 or 6 similar photos at a time with the same settings. I'm not quite clear what you're suggesting but I'm hoping that its a "work round" using two stages to achieve this. 
    I can't see a list of open files within ACR to ensure that they are all selected as you suggest. 
    What does clicking Open rather than Done mean?  Does this amend the original RAW file to the settings selected so that if I then "process multiple files" on the whole folder to convert from RAW to JPEG they will in fact have already been processed in smaller groups so I can convert without applying any further changes?
    If so, what settings should I apply to "process multiple files" to ensure a simple conversion of file type rather than any further adjustments?
    Any further help on this would be much appreciated.
    Andrew

  • How do you convert the audio from a mpeg4 video file to mp3?

    How do you convert the audio from a mpeg4 video file to mp3 format?

    Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.

  • How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.

    How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.  I see how to change the size after the document is open by going to File/properties/initial view and saving this setting.  I want all documents to open at 100% when they are first opened.  Can I set this as a default view?

    Hey Kris,
    You might go to Edit> Preferences> Zoom
    Do this without opening any particular PDF so that it applies to the program itself and not just one document.
    Try this and then let me know.
    Regards,
    Anubha

  • How  do  you close the events  folders  in  i movie  version 9.0.8 1795

    how do you close   the open events  folders in  i move events  library so that the are in a folder on the lhs in the events library  as  shown  in the help page " organising events in the events library"
    my events library on the lhs  is  blank and all the  evnts folders are on the rhs  and open with all the video clips on display .
    i have  seen it didplayed  correctly  on a mac pro with i movie 11 version 9.0.8 1778-- 
      my version  is I MOVIE 11 VERSION 9.0.9 , 1795..
    i am downloading the video clips via camera  card to  i photo ( not by connecting camera  and  importing) .  the video  clips appear in the  i photo folder  alongside the still  images but  then automatically import to i movie when you open i movie   next time  and  select last import   in the  events library  > i photos and  select the update thumbnails  box which appears .
    i want the folders   with the video clips to list  in the events  library on the  LHS in folders   and not   be all open on th RHS.
    any ideas /
    iainfromnsw

    Hi,
    Please try this: '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', click '''Extensions''', '''Appearance''' or '''Plugins''' on the left to see the installed extensions, themes and plugins respectively.
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
    [https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
    [https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
    [http://kb.mozillazine.org/Testing_plugins Testing Plugins]

  • How do you convert the encoder counts to RMP of the motor using a myRIO in LabVIEW?

    My intent is to gain hardware interfacing and general Labview experience. I am using a myRIO to control a Pittman 8222 34V Brushed DC motor (Motor Specs).
    I recently created a code to control the angle of this motor using PID, which was visually implemented using the black disc with a white tick mark on it (see attached picture: "IMG_2523"). 
    I now want to control the speed of this motor againg using PID, but I am not sure how to properly convert the encoder counts to RPM of this motor. I have attached 2 screen shots of my block diagram and my front panel for reference ("Capture" and "Capture2"). In the front panel picture, you can see my "actual" speed of the motor is a very choppy signal when it should theoretically be a flat line. To get the RPM, I currently use a shift register to store the current count value (which I converted to deg, then to radians), and then subtract the previous run's value, then divide by the while loop sampling time (10 ms). This would give me rad/s, which I then wrote a subVI to convert it to rpm. 
    Any help would be greatly appreciated, thanks. 

    Hi,
    One thing you could try doing is verifying that the conversion from rad/s to rpm is working correctly. 
    This tutorial might also be helpful. It's not using the same hardware that you are, but goes through the general steps using PID control. 
    CompactRIO Motor Control Basics Tutorial: http://www.ni.com/pdf/labview/us/compactrio_motor_control_basics.pdf
     

  • How do you delete an event in iCal?

    I have an iPad 2 and I cannot delete events from iCal.
    Does anyone know how to do this?
    iPad 2 seems very unstable after the latest software update on 9 May 2011.

    Click on the event, and use the delete key. Or click on the event, and choose iCal>Edit>Delete.
    Good luck.

  • How do you convert the electronic serial number for the charger to the one printed on the charger?

    I am trying to figure out how to convert the serial number reported by system_profiler for the power adapter to the serial number that is printer on the charger when you remove the plug adapter.
    It appears that both are unique numbers, but I can't seem to figure out how to convert from one to the other.

    I am trying to inventory and track over 300 student laptops at a school. The chargers sometimes get swapped Or taken. I can collect the electronic number automaticly but I am looking for a way to correlate this to the number we have on record from the charger.

  • How do you alter the event start time

    The event start time always defaults to 5:00 pm. How do I change this.

    Thanks for replying. Yes my event time is responding as you pointed out, however I' putting on a number of events at about 4:00 pm that all start about 8:30 am so it would be very useful if the default time could be set for a specific time. Thunderbird is version 31.5.0, I only started using this programme a few days ago and downloaded the Lightening Calendar at that time. Could not find how to find the version of Lightening perhaps you could help there as well. Regards

  • How do you change the Event Viewer archive location in Server 2008 R2?

    We're wanting to redirect the security and system event viewer logs to the D:\ on a Server 2008 R2 box
    We've got the current logs to save there, however all archived system/security logs are still being saved on the c:\ in their default location in %windir%\system32... and killing the OS partition.
    I can write something up in PoSh and schedule it, but I'd rather use any built-in capabilities first...
    I've taken a peek in the HKLM\Services\CurrentControlSet... hive where the event viewer behavior is configured and do not see an option to set a path for the archive location...

    Unfortunately, you cannot customize the location of archived event logs in Windows. The logs will always be archived to %windir%\system32\Winevt\Logs\Archive-xxxxxx
    There'd be some scripts can help you automatically archived logs to another location. You can find them here: http://gallery.technet.microsoft.com/scriptcenter/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=security
    Regards,
    Zhang     
    TechNet Subscriber Support
    If you are
    TechNet Subscriptionuser
    and have any feedback, please send your feedback here.

  • How do you get the Event folder date to match the media dates in FCPX

    Modifying the clip date/time with the Modify command works fine ... but the Event itself still has the date the event was created, not the date of the media that it contains.
    If tried using Touch on the Event folder but FCPX ignores it.
    Any ideas on how to get the Event folder date to match the media dates (or set to any other date desired) so that Events sorted by date show the actual dates of the media that they contain?
    Thanks
    Jonathan

    Here is the texture I've been manipulating  all afternoon to try and achieve the looks i want.
    and when I put this texture over the top of other images and select Multiply, and adjusted the opacity, this is what i get....
    Now this kinda works?? but it still looks not as good on an asian person.
    Thanks by the way to everyone for all the tips, I really really appriciate it   and more suggestions for improvments are welcome!

  • How do you edit the event title after importing?

    I still have not figured this one out. It's not double click, not control click, not command click, not the "info" or "edit" buttons. What is it?
    I am also frustrated with merging and splitting events after import. I am now doing all that in the finder before I import. What a pain! Any tips?

    I don't like iPhoto '11 either.
    1. I can't change the name of the multiple events in the import window as it was possible in earier versions of iPhoto.
    2. It is not possible to merge events anymore in the import window.
    3. When I get back to the Events view directly after importing new pictures, the most recently added events do not show up.
    4. Worse, multiple earlier events seem to have disappeared all together.
    5. When quitting iPhoto, I get the message 'updating library'. After restarting iPhoto, the recently added events do show up without a name but just with a date. Then I can rename and merge these events. The events that had disappeared do show up again.
    All together, this feels like a very crappy and cumbersome upgrade...
    How do I get the correct functionality back, apart from downgrading to an earlier version of iPhoto?

  • How do you restore the events in iphoto from a backup cd?

    I'm trying to restore my photos that are on a cd.  The "events" did not show up in iphoto.  Is there a way to restore the events?

    How was the CD created?
    OT

  • How do you apply the same password policy to every PDF document you create with inDesign?

    All,
    Adobe peeps!,
    I don't know if this is really supported with inDesign 5.5, but here is my my use case:
    I constantly create more than 10 PDFs a day using inDesign
    On  all PDF's I create, i want to apply password security to protect them
    But in order to do so, within inDesign, I am   always forced to go to the "security dialogue" pane to set up the same permission  and passwords over and over again
    This gets tiring :/
    So what I am hoping to do is  the following:
    Like acrobat, I want to create a password policy within inDesign
    I want all PDFs created to have such a password policy  be automatically applied
    I know acrobat supports something like this (http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7d68.w.h tml), but, unless I may have missed something, the Acrobat feature is limited. That is, the help link  does not tell me how to automatically do this with Acrobat either (the link does not explain to me how to "automatically apply the same password security policy to every PDF document I save within the application). I think the only way to do so is via "Adobe LiveCycle Rights Management ES", but for non server users, I am hoping there is another way.
    So my questions are:
    Is it possible to create password security policies in inDesign?
    Is it possible to apply the same password security policy to every PDF i create in inDesign?
    If not, can I change default settings within Acrobat ProX to automatically apply a password security policy everytime I save a PDF?
    If all fails, do you guys know of any extensions that can support this?
    Any help would be great. Thanks!

    Steve,
    Thanks for your notes. To follow up on your response.
    Bummer. I kinda had a hunch at this inDesign limitation.
    I have been aware of the method for setting up of a security policy within Acrobat. While this feature does cut down some of the work involved in creating and applying password policies to pdfs, what I am looking for with Acrobat is to apply the same password policy to every document I save from the app. Automatically. Without having to manualy select a policy.
    I think my solution will have to lie in me creating some sort of script to help support this need. I don't think Acrobat Pro X has the capabilities to allow me to tinker with, say, creating a save PDF preset that will allow me to automatically apply a password policy.
    PS. I am using acrobat pro x.

  • How do you change the size of a photo in a document?

    Hello
    I've pasted a photo into a document I'm typing but the photo is too big.  How do I change the size of the photo?
    Thanks

    TextEdit is not a very sophisticated program. As far as I know, there's no way to resize an image on the fly in TextEdit, so you'll have to follow Shotgun00's advice.
    I would advise not using TextEdit for anything real. Buy yourself a copy of Pages from the App Store instead, you'll be much happier with its capabilities if you intend to create complex documents containing images and text.

Maybe you are looking for