How do you copy the R shape symbol to show that a name is trade marked?

I clicked on the shapes buttom and the shapes came up on the menu bar. I found the symbol for registered trademark but could not figure out how to copy it to the back of the name that was registered. The same was true for the TM symbol. Please help. Thanks.

but could not figure out how to copy it to the back of the name that was registered.
Hello,
I'm not quite sure what you mean by that.
The Photoshop shapes are created by choosing the shape then dragging it out on the document. You can put it behind something (like a Text Layer) by dragging the shape layer below the text layer in the Layers Panel.
An alternative is to use type to create those common glyphs.
Can you post a screen shot?

Similar Messages

  • How do you copy & paste a shape that is part of a "combined shape" to a new layer?

    How do you copy & paste a shape that is part of a "combined shape" to a new layer? For instance, I have a combined shape of 2 rectangles (not merged) and I want a copy of one of those rectangles as a new shape layer. I know I can duplicate the entire layer and delete the shape(s) I don't need - but I was wondering if there was an easier, more straightforward solution.

    Hi,
    What version of photoshop are you using?
    In photoshop cs6/cc you could use the Path Selection Tool to select one of the paths and then Layer via Copy
    (Ctrl+J or Cmd+J)

  • How do you change the position of email sender so that it's on the left (sender[from], subject and date received)

    How do you change the position of email sender so that it's on the left (sender[from], subject and date received)

    In the Thread Pane where your messages are listed?
    You see that bar with the labels "From", "Subject", "Date" and so on? Well, they are buttons. You can click on them to sort your messages. You can also drag them with the mouse left and right to reposition them, and you can drag their ends to change the column widths.
    These are standard computer actions; you can do all of this in Windows Explorer ("My Computer") too.
    In Thunderbird, a right-click on any of these buttons will reveal a pop-up menu where you can select and deselect the columns to control what is shown.
    More here: http://www.ramsden.org.uk/8_How_to_sort.html

  • How do I get the Ap Store to stop showing that I have an update available? I have aready purchased the update from the company's site.

    How do I get the Ap Store to stop showing that I have an update available? I have already purchased the update from the company's site.

    A Fix For: App Store Keeps Wanting To Update Apps

  • How do you copy the templates from another webstie and use them as your own?

    Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver? I would like to know I am a newbie when it comes to this program so please make your statement understandable for me, thanks. Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.

    Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver?
    This is difficult to understand.   How are you copying templates from another site?
    If you have all the files that make up the template, then it's only a matter of saving all the files to a folder on your hard drive and setting up a site definition pointing to this folder.  You then work on the files as usual.
    Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.
    Without seeing the page it's difficult to judge what your problem is.  If possible, please upload the files to a remote server and provide a link to the page. It's the only way people can help - if they see your page in action.
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    Web Design & Development
    http://www.perrelink.com.au
    http://twitter.com/nadiap

  • How do you copy the entire contents of a hard drive?

    Without all the permission issues and such? One example is when I try to copy my drive to an external firewire drive that's empty I get the can't copy a file cause one already exists. The drive is blank? I'm doing a quick reformat and it would be easiest to just copy the entire drive and pull files I need over later. It's a powerbook G4.
    Mac Pro Tower 2.0GHz   Mac OS X (10.4.9)  

    Hi
    Will Kappy's answer in this thread (link below) help?
    http://discussions.apple.com/thread.jspa?threadID=959886&tstart=0
    Steve

  • How do I copy the URL of a PDF file that I have opened in FireFox using FoxIt Reader add-on?

    This does NOT seem to be a FoxIt question because, when I use FoxIt 5.0 as my PDF reader in Internet Explorer 8, I do not have this problem. I have encountered the problem only when using FoxIt 5.0 as my PDF reader in FireFox 4.0. The problem is quite annoying. I NEED to capture the URLs of the PDFs I view and I prefer to use FireFox as my browser. The problem exists because no destination field is displayed when FoxIt opens in FireFox. A destination field IS displayed when FoxIt opens in IE.

    Another option for sending large files is to use :
    http://www.filedropper.com/
    You upload the files to the website and it creates
    a URL that you can copy and paste into an email
    which you send to the recipient and they use the
    generated link to get the file.

  • How do you update the song/artist information on songs that you have loaded to the cloud.  Some are not displaying correctly on my Iphone.

    I have loaded all my music to the cloud from my hard drive.  When I am viewing the music on my PC from the cloud it wasn't displaying all of the song/artist information correctly.  I took the time to go into each one that wasn't displaying correctly using the "get info" option and I updated them all.  Now they are displaying properly on my PC but not on my Iphone.  I'm sure it was because of the way they were loaded.  My question is how do I update the information for the music that is on the cloud so it will display to my Iphone correctly (and the Ipad I just bought but haven't setup yet?

    Pretty sure I just downloaded the .exe files to the SD card (I have a directory called "drivers" there & ran from Windows, no need to boot from anything else. Didn't even need to use Safe Boot. The files do need an .exe extension IE someimes downloads as _exe. No idea why but would just need to rename if download has the underscore and not the period. The you can run them.
    Was so easy I really did not think about it. One of the Intel Platform drives does say "requires 1.60 update" so that is the one you need. Do the 1.60, reboot, and then the Intel update.
    Key point is the release note on the Intel Platform Installer
    "Release Notes
    1.Please install the  Windows BIOS version 1.60 or higher for Encore WT8-A (PDW09x) before installing this Intel Platform Installer update." note this says "BIOS" and not "USB BIOS" which is a smaller file.

  • HT5625 When I sync my iPhone to my Mac I do not see the photo folders I created . How do i copy the folders to my Mac so that I can then sync/copy them back to my iPas?

    How do I sync/copy the photo albums I created on my 4S to my Mac and then to my iPad?

    Hello, see if these help...
    http://support.apple.com/kb/ht4236
    https://discussions.apple.com/thread/5058589?start=0&tstart=0

  • HT5664 how do you copy the iPhoto library to the hard drive

    I copied some photos onto a DVD and my new iMac won't let me download them into iPhoto.  I don't understand the instructions to download the iPhoto library into the hard drive.  How do I do that?  What do I do once that part is downloaded?

    1. Drag it.
    2. If you're moving loose files, open iPhoto and import or drag them into it. If you're moving an iPhoto library, double-click it.
    (93079)

  • How do you copy the apps on your iPod 4 and put them on iTunes?

    I have an iPod4 and it says I need to put the apps onto itunes because it will delete all the apps I have on my iPod4.

    Is the computer authorized for the account from which they were purchased
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • How do you restore the system from a backup file that you created previously

    I have a notebook, Pavilion g6 - 1031TX running windows 7 64bit OS, and ran the backup utility a few weeks ago before running a full system recovery to attemp to fix an issue - this issue was fixed by warranty, and now I need to recover everything from the backup files, I have run the restore executable in the folder and it created another folder on my C: drive (System recovery files), how do I use this to restore the system to its previous state?

    Unfortunately, the backup utilty portion of Recovery is not optimal solution for restoring many files.Unless you know exactly where they go you are stuck. Most of the important stuff such as photos,music,etc will be in the 'Users' folder under your user name. You will have to manually move them to correct location.
    A better option in the future is Windows 7's backup app in Control Panel.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How Do You Get the Apple Trackpad Icon to Show Up in Sys Prefs?

    Just upgraded to 10.6.4, did all software updates, and bought the Trackpad. Trackpad works, but there is no icon for it in the Sys Prefs to make adjustments. Suggestions?
    Thanks
    Tom

    Thanks!
    Yeah I saw it last night on the Apple website, and ran to the Apple store today to get one, All Things Apple Fanboy that I am
    It really looks cool, and is very responsive as you would expect, but after decades with a mouse, will take some getting used to. I've been using it all evening and starting to feel a bit more comfortable with it. Quite a change though. I do love not having the space it saves in not having to move the mouse around....thanks again..
    Tom

  • How do you change the color of a page item that is a static source

    I have a page item that does not have a label but the source of the item is always static. It will always show INCOMING in this source. INCOMING is hard coded under Source in the Source value or expression. The customer wants the word INCOMING to be bolded. I added the ccss code to bold the value but it matter where I put it the value will not be bolded.
    Thank you,
    Patti Spycher

    Put the following in the HTML Form Element Attributes of your
    style="font-weight:bold;color:darkblue;font-family:Courier"See this example:
    http://apex.oracle.com/pls/otn/f?p=31517:68
    by picking any of the employees from the select list and running "Search"
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • How do you get the new pane window to show websites?

    I followed the instructions in the help article, but it still didn't make my preview windows come back. Am i just doing it wrong or do i have a different issue? I just installed kapersky anti virus as well but i dont see any options that would affect the preview tabs. What else can i do?

    Yes.When you click on the new tab plus sign, there are preview windows for most used websites. Mine have all disappeared. The silhouettes are there, but they will not populate with any websites. There is a help topic about it, but I followed the instructions and no joy, it didn't work.

Maybe you are looking for

  • Application not Showing Up on Application Report

    I have 7 computers to manage and on one system InDesign (CS4) does not show up on the application usage report. I know she's using the application because this is the primary software we use in our department. Can anyone tell me why it's not showing

  • MAS/MSY/MSA on one machine: possible to change ides ?

    Hello forum, I've the problem on my mas/msy/msa-dev.station that I cannot generate medata/table scripts: error: table was not found in the server. Generating metadata although makes trouble. I think there is a problem with the database so that I thin

  • I want to delete a dictionary

    My browser defaults to French and so everything I write in English (my working language) is underlined. I then have to go to menu and change it. EVERY TIME! I've gone to the dictionary add on page but I don't see anything for deleting languages just

  • Best Design for Home Network Between PC and Mac

    Good day, all! Forgive me if this has been covered before - I could not find a thread addressing this very issue. I have an iMac, and my wife refuses to give up her PC.  She is also not that great at routinely backing up her PC laptop, leaving it to

  • Has anyone tried this way

    After verifying/repairing permissions and hard drive, and then creating a backup clone? Create a new User Account with admin privileges. Then have only THIS account active when installing Leopard. Shouldn't this bypass any possible problems with thir