How do you create a bootable image accessable via OPTION at boot time...

Hello. Is there a way to create a 'bootable image' of a hard drive and save on my raid and access it via the OPTION menu (hold option key at boot)? I would like to create a OSX bootable drive and then save the whole thing in a file. That way I can set up different configs and just boot into whichever I wish to use. Say, one to rescue a crashed hard drive, etc.
Information appreciated. Thank you,
--Scott
Powermac G5 'Quad' Mac OS X (10.4.6)

CCC is used to make a bootable clone. It will also make an image file that can be installed using ASR or that can be used with NetBoot. It does not make a bootable image because you cannot boot from a disk image file. The image file can also be burned onto a CD or DVD, but you will not be able to boot from it because a CD/DVD is not a writeable device, and OS X must be able to write to a startup device.
Another utility, BootCD (not yet usable with Tiger), worked around the problem by rewriting some of the startup code in OS X to force the making of a RAM disk, then moving some of the startup files to the RAM disk and designating the RAM disk as the startup device. Although BootCD will make a bootable and customizable CD using Panther, it does not work with Tiger.
Any questions?

Similar Messages

How do you create a still image from a video using IMovies 11?

How do you create a still image from a video using IMovies 11 on a Pro Mac?

The simplest way is to do a simple screen capture.

How do you create a disk image using Disk Copy?

Hello,
Is there any way you can create a disk image using Disc Copy? Is there a better way to create a Disk Image?
I would like to burn two copies of a 4.2 gig folder on my mac. I usually insert a blank DVD-R and then the mac asks if I would like to prepare it at which point I click "yes". An icon of a DVD disk appears on the desktop and then I drag my files onto this icon. It takes a few moments to create the disc image and then I click "burn". However, after the disc is burned the disc image disappears and I have to start all over again if I want to make another copy.
How can I save this disc image? If I could save the disc image, it would enable me to burn a second DVD right after the first without having to create the disk image all over again. This would save a lot if time.
I am using OS 10.1.5
Thank you for any suggestions

Thanks Niel for the info about creating a Disk Image with the Disk Copy utility in OS 10.1.5
That worked however when I insert a blank DVD-R, the disk image still has to be copied to the DVD-R buffer and then it can be burned. And so this doesn't really save any steps - the "copying into the buffer" step still has to occur whether or not you have created a disk image of your files. So creating a disk image doesn't really shorten the process of burning multiple copies of a DVD.
I will try to describe the steps more clearly:
Two of the three steps for creating a DVD (steps 2 and 3) are very time-consuming:
1. put blank DVD into the drive (a DVD disk icon quickly appears)
2. drag files onto this icon (this step takes a long time as the files are copied into the buffer)
3. choose "burn" (the actual burning also takes a long time)
I was hoping that when I create two or more DVDs of the same files, I could first create a Disk image so that when I create the second DVD, step 2 could be skipped. That does not seem to be the case - the disk image still has to be re-loaded. And so I think I will not bother with the Disk image idea - it doesn't seem to be necessary or helpful when burning DVDs to backup data.
Thanks for your suggestion.

How do you create a mirror image of a photo?

Am I just completely missing something or can this not be done unless you make a card or something?? I can see how to rotate and adjust how the picture looks but can't suss out how to simply create a flipped or mirror image of a photo...
Anyone got any quick tips to share?
THANKS

You can't do this in iPhoto.
In order of price here are some suggestions:
Preview, already on your Mac.
Seashore (free)
_[The Gimp|http://www.gimp.org/macintosh>_ also free
Graphic Coverter ($45 approx)
Acorn ($50 approx)
[Pixelmator|http://www.pixelmator.com> ($60 approx.)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

How do you create a mirror image effect on imovie 2014?

All the tutorials online show how to create a mirror image effect on imovie 2011, however there are none showing how to do it on the current version.

You can't do this in iPhoto.
In order of price here are some suggestions:
Preview, already on your Mac.
Seashore (free)
_[The Gimp|http://www.gimp.org/macintosh>_ also free
Graphic Coverter ($45 approx)
Acorn ($50 approx)
[Pixelmator|http://www.pixelmator.com> ($60 approx.)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

How do you create a disk image of windows so u can increase partition size?

Ok, I have installed windows on my mac using bootcamp so i can play pc games and such. I mainly use the mac side of the computer but I have 30 GB devoted to windows. I ran out of space though and now want to uninstall windows so i can make the windows partition bigger. The problem is that I don't want to have to install ALL of my programs over again once i reinstall windows so I want to take a disk image of windows which i can revert to once it is reinstalled. I tried using the disk utility to do it but it keeps giving me error messages. Does anyone know how do create a disk image using windows??? or maybe I'm doing something wrong with the disk utility??? HELP!

The easiest way I have found to do this is to backup the windows partition with a program such as WinClone
http://twocanoes.com/winclone/
Then use the bootcamp assistant to erase and recreate the partition, finally restoring the backup to the new partition. I have done this several times with my mac and it works great.

How do you create a bootable back up of the hard drive w/ disk utility?

I think it's pretty incredible that the most basic of basic topics, how to create a back up of your hard drive using the native software Disc utility, is nowhwere to be found. I tried searching "create bootable back up" and amazingly enough nothing comes up. Anyway.... can anybody let me in on this top secret information, I would really appreciate it. Once again the objective is to make a bootable clone of my hard drive onto an external disk. Thanks for the help,
-BK

    Are you saying I could still use Disk Utility's Restore function to clone a 90GB startup drive, that had 40GBs used, to a clean 60GB backup drive?
Correct. The size of the source drive is completely irrelevant – as Kappy is saying, it's just the size of the data to be copied that counts. (An explanation that some people like is that "empty space is not copied").
    I've always used a dedicated backup drive that was larger than my startup drive
Nothing 'wrong' with that, but unnecessary. Same size would be large enough for any future possibility. Theoretically, if you had a 250GB internal drive but knew that you would never have more than 20GB of data on it, a 40GB backup drive would be considerably more than sufficient (a bit of a silly example, but true). Other considerations: 1. you already know about the 15% free space recommendation, and 2. with drives, 'bigger' is nearly always a better investment for the future. I would always advise someone about to buy a drive to multiply the size they were thinking of by at least 4.
    always reformatted and zeroed it
Again not 'wrong', but overkill. A simple 'erase' (2 seconds) would suffice – erased is 'clean' enough. Consider that those, like myself, who do "synchronized" backups (copying only added or changed items for the saving of time) NEVER erase the target, or just once in a blue moon. If your backup drive is stationary on your desk the chances of it developing another bad block are close to nil. The time when a re-zeroing (mapping out of bad blocks) becomes imperative is immediately after the cat knocked the drive onto the floor! We are in the main talking here about a software solution (the mapping) of a hardware problem, physical imperfections on the surface of the disk.
=-=-=-=-
Regarding 'other stuff' on the backup/target drive, our suggestion for CCC users is:
[Note that this is NOT for the situation where the target is to be erased every time.]
    For your first cloning you should find a temporary home for that stuff on the external drive so that you can prepare the drive correctly [instructions…] After that you can move that 'other stuff' back onto the external drive.
    If you absolutely cannot find the needed 'temporary home' you can proceed anyway but you must take responsibilty for any consequences due to inadequate preparation of the drive (e.g. not 'zeroing' it to map out any bad blocks) – you should be OK but it is a question of luck. For subsequent clones, and for this first one if you wish to proceed, you do not need to move that 'other stuff' if you do as follows…
    You have to ensure that the clone will not interfere with that other stuff. Put all that 'other stuff' into a folder (with sub-folders as you desire) on the target (at root level, i.e. what you see when you dbl-click on the disk icon) and give that folder a unique name, i.e. a name which you know you will never use on your source drive. If you did have such a folder on the source the cloning would make the folder on the source overwrite the one on the clone, so choose the name with some thought. (How about: "Nevercall_methis"? ;=))
A dedicated backup drive is, beyond doubt, to be highly recommended as the best arrangement. 'Other stuff' on that drive is possible, easily 'do-able', but is often the cause of complications at some stage. (Buy another drive! ;=)).
"Buy another drive" is not just me being facetious. If you data is vital to you, you should have TWO backups on different drives. Consider this: while you are cloning/backing up, you actually have NO backup – a power outage and all, source and backup, could be lost at the same time – unlikely but not impossible. I do hate to be a harbinger of gloom, but…
Happy cloning! ;=)
Moderator, forums.bombich.com

How do you create a disk image?

I have Lego Star Wars for the Mac, and I don't want to keep having to get out my portable disc drive all the time to play the game. Is there any way I can make a disk image of this game so that I don't need the disk to play it anymore, and if so, how do I do it? Thanks!

On many Games, Disc Images do not work due to protection methods used, but to try, insert the Disc, (I assume this is a CD or DVD & not a Hard Drive?), then open Disk Utility, highlight the Disc, File>New>New Disk Image from...

How do I create a bootable snapshot image of Lion?

How do I create a bootable snapshot image of Lion? In the past, I used disk utilities - restore to create a copy of current hard drive on an external drive. If there was a problem, kids could boot to external and work until internal drive was fixed. This proved to be a great solution. On a new Macbook Pro with Lion, I get an error when I try. It says to do a restore from the recovery disk, but the recovery disk says it is a limited function OSX. I would like a full OSX so they can continue to work and even copy files over if the internal disk is suffering intermittent failures enough not to boot but not enough to keep from copying files. A few years ago one of the kids had a disk/boot failure duing finals but was able to boot from the external hard drive, copy over what he needed and access the internet so that he could finish the exams. Time machine is great, but there are instances where you need a quick fix to keep going until the new hard drive arrives.

I do not run Windows, so I have no idea how to handle that type of situation.
But, just to be clear: disregarding Windows, the recovery option downloads the OS and installs it. Technically, that is not a clone unless you copy the installer and create a bootable OS with it. A clone is an exact copy of your system including all your apps, user settings, files, etc, etc and will exist on an external hard drive in addition to your system on your internal - that is done with CCC or SuperDuper.
And, a GUID partition is created in Disk Utility > click on the drive > choose Partition > choose a layout other than what you now have > there will be a clickable Options button below. Click on that and you can choose GUID. Note: partitioning your drive will erase everything on it.

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

How do you create a rolling title that ends on a still image of the title?

How do you create a rolling title that ends on a still image of the title?

Here's the help page that describes using the tab stops:
http://help.adobe.com/en_US/PremierePro/4.0/WS35CA53B6-EAFF-499a-A600-DCD85686354Da.html
Let me know if that's clear as mud and I'll try to shed more light on the subject.
One thing that isn't specified/clarified/whatever (and was the biggest stumbling block for me when I first tried this in PPro 1.5) is that the ruler for the tab stops is zeroed at the edge of the text box, and tab stops ONLY work in text boxes (or "text area," however you please). At any rate, you have to position that ruler so that the zero point is at the left edge of your text box, and then the rest of the instructions in the help doc will make sense.
Also, it's useful to show the tab markers while you work. Just go "Title > View > Tab Markers" and you're good.
Hope this helps!
As a side, I have found that this one feature is really the best and most useful part of the PPro titler (and also, just about the only function in the titler that WON'T cause your system to crash on a regular basis).

HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable? The article referenced is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable? The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
You have two or three options (depending on your Mac Model).
1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
2. Download Software from Apple servers...
3. Install Windows...
Are any additional instructions really necessary?

How would you create a read/display only applicaiton montior role for SRM

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

Hi There, I have just bought a new 2013 iMac.
Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp? I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
Thank you. Joe

Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How can I create a disk image of snow leopard installer disk from my Imac which runs it?

how can I create a disk image of snow leopard installer disk from my Imac which runs it? It came without DVD installer, and I want to make a copy of it's OS installer but can't find out how.

You need to have the disc in order to create disk image of snow leopard installer disc. What did your machine ship with? If something later than SL, then why? If earlier, then you can buy the SL installer disc and make the disk image.

How do you create a bootable image accessable via OPTION at boot time...

Similar Messages

Maybe you are looking for