How do you create a form that has user permissions per form field for different user?

I need to create a form that is used by multi people but each user needs to fill out different fields within the form. I need the first user to make selections from a list and save it to send to another (the selection fields then need to be locked). Then the other user checks one of the selections made by the first user and saves the document to send back to the first user. Not sure if this is possible. I would like the first form field selections not to even show as a highlighted field to the other user (like just be more like a text field). I want the document to be able to be used more than once. The list selections will change and need to be sent to the other user at least once a month or more. Has anyone done this?

There's no built-in way to do that, but it's probably doable using a custom-made script to hide and/or lock the fields.

Similar Messages

  • How do you create a part that has two through holes with a single net connecting to both.

    I attempted to create a part that contained 2 through holes with a copper strip between them so they would connect to a single net, but one of the holes (pin 2) gets rejected by Ultiboard as an unconnected entitiy. Is there a way to define the second hole (pin 2) in such a way as to mitigate the problem?
    Thanks, Tod
    Solved!
    Go to Solution.

     Hi
    It is quite simple to do so:
    when making the footprint, you just put your two TH pins where you need them. name them 1 and 2.
    Then in Multisim, when making a new component with the component wizzard,in step 2 make a 1-pin component, and select your desired footprint(which has two pins).
    thenin step 3, make/choose your 1-pin symbol.
    In step 5 you can map the footprint to the symbol , just use both footprint pins for the same symbol pin.
    When using it in your schematic, you'll see one pin, in the layout, there will be two pins connected together..
    Good luck
    stressed user..

  • How do you create a shot that has several different video "layers"?

    I saw an episode of Workaholics where Adam stays up all night and there is a part where he is sitting on the kitchen floor but there is a "second" Adam running around the house at the same time. I would like to try and recreate this but I'm new to Premiere and I don't know the exact terminology that would explain this better. For reference, it is episode 12 "telamerican horror story" of season 3.
    Thanks!

    That scene could be a problem.
    The guy through the doorway is easy as is one of the two guys at the refridgerator.
    But as soon as one of those two guys crosses the other, a 30 minute edit just became an hour of pain and suffering, or more, to edit each and every frame individually. If you are practiced at it, then fine. Otherwise, plan to devote an hour per frame for the first few frames.
    Also, when you shoot the scene, you must, I repeat, MUST have your lighting under control. No sunshine, no stars, no Moon, nothing external coming in anywhere. Otherwise, if your lighting changes, you will spend a LOT of time fixing it, and it still won't be perfect.
    One other thing. Your tripod has to be very sturdy and locked down absolutely tight. The slightest movement will completely ruin the scene.
    However, with proper lighting, a steady tripod, and an actor/actress who hits their marks and never crosses over the boundaries between characters, it is a pretty easy job to get two, three, or even more instances done in just a few minutes.

  • How do you create PDF Form Fields that will expand to contain their content?

    I use Acrobat XI and so far as I know LiveCycle Manager taken away.
    1. Is there a way one can do it directly in Acrobat?
    2. Or is there a simple Javascript i can use?

    I know, but it should be possible to make it so that all items were moved forexample down if an item over was extended

  • Can you create a template that has a header and footer to forms?

    Can you create a template that has a header and footer to forms?

    Yes but how are they going to create the Landscape versions?
    The problem with doing it in Pages '09 as rotated content is that the Headers and Footers are not rotated and there is inherent clumsiness in the rotated content usually being too large for the page when viewed at 90°.
    Best to make it in two or more separate documents.
    Peter

  • How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • How do i create a report that has drill-down with class?

    How do I create a report that has drill-down levels so that I can have summary information at the top level but then view specific records at a more detailed level?

    can i know ur email address.
    this is my other one coding
    but problem is very very slow when i 1 see my output
    TABLES: proj, coep.
    *&            TYPES DECLARATION                                        *
    *TYPES: BEGIN OF tb_coep,
             wtgbtr TYPE coep-wtgbtr,
          END OF tb_coep.
    DATA : int_proj TYPE proj OCCURS 0 WITH HEADER LINE.
    DATA : int_coep TYPE coep OCCURS 0 WITH HEADER LINE.
    DATA : gd_date(10). " FIELD TO STORE OUTPUT DATE
    TYPES : BEGIN OF t_date,
              year(4)  TYPE n,
              month(2) TYPE n,
              day(2)   TYPE n,
           END OF t_date.
    *&            SELECTION-SCREEN                                         *
    SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: so_pspnr FOR proj-pspnr OBLIGATORY.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN END OF BLOCK b01.
    *&            TOP-OF-PAGE                                              *
    *&            fetch the data for the list                              *
    SELECT * INTO int_proj FROM proj where
             pspnr in so_pspnr.
    append int_proj.
    CLEAR int_proj.
    ENDSELECT.
    SELECT * into int_coep FROM coep WHERE
             wtgbtr in so_pspnr.
    append int_coep.
    CLEAR int_coep.
    ENDSELECT.
    LOOP at int_proj.
      write : / int_proj-pspnr, int_proj-post1.
    ENDLOOP.
    LOOP at int_coep.
      write : int_coep-wtgbtr.
    ENDLOOP.
    Edited by: Dickson on Jul 10, 2009 10:53 AM

  • How can you find an ipod that has been lost

    how can you find an ipod that has been lost and the icloud is not turned on

    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How do you open a picture that has had text added using software such as Windows Photo Gallery?

    How do you open a picture that has had text added using software such as Windows Photo Gallery?

    In Editor, go to File menu>open, and point to where the photo file is on disk.

  • How Can You Track a Person That Has Your IPhone And You Want It Back

    How Can You Track a Person That Stole Your IPhone And You Want It Back

    Log into icloud.com with your Apple ID and use Find my iPhone to track it. If it can't be located that way, there is no way to track it.

  • How do you recover an app that has been downloaded already but got deleted by accident,but don't have a credit card

    HHow do you recover an app that has been deleted.?

    I've asked this thread be moved to the iPad forum.  iPads can't run Classic operating systems:
    Using iPad

  • How can I create a subVI that has state?

    I'm trying to simplify a VI that I inherited and I noticed a recurring pattern that IMHO should be a subVI.  The pattern is that we have a digital output line that is controlled by a timer.  Each output has a start time for it to activate and a duration after which it is turned off.  When the state changes, a single line entry is added to a common log file and an indicator shared variable is set so that the remote host VI updates.  We have a big while loop that checks the current time against each of the activation conditions.  To detect when the state has changed, we're using a shift register (for each actuator).  It's one thing to see the same pattern 3 times, but it's worse -- we want to sometimes use a different number of actuators.  If I was writing this in C++ (with which I'm far more comfortable than LabView), I'd write a class for the actuator and instantiate it N times.  The class would have member data to keep track of its state.  I can create a subVI that does the meat of the design pattern, but I can't figure out how to store the previous state in the subVI without requiring it to be passed in.  How do I keep the state and behavior of a VI together?  Surely there's a way to do this because otherwise I can't see how you could implement state-ful algorithms like, say, a PID controller.  But I'm at a loss to figure it out ...
    Thanks.
    Keith.

    To save state in a subVI and not use that state in other subVI calls, make the subVI reentrant.  When a subVI that is reentrant is called it creates a unique memory space for that subVI.  This is called a clone.  That memory space is where state is held for that subVI.  Keep in mind that it also means that the memory footprint is going to be larger.
    To set a subVI to be reentrant, open it and go to File -> VI Properties and select execution.  It will be a choice on the bottom left.
    Hope that this helps,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • How do you create a calculation that automatically updates changes?

    Hi all,
    I am trying to create a calculation using subtraction. This is how it is set out:
    KM
    -KG
    =Field1
    -Field2
    =GM (fluid)
    Under the calculate tab for Field 1, I have written in the Simplified field notation:
    KM-KG
    And under the calculate tab for =GM (fluid), I have written in the Simplified field notation:
    Field1-Field2
    And this all works perfectly providing I don't change any of the totals in the KM or KG or Field2 fields.
    If I make changes in those fields they don't automatically update.
    How do I make them automatically update?
    Any assistance would be hugely appreciated.
    Many thanks.
    Bridie

    To set the field calculation order, first go into form editing mode (Tools > Forms > Edit) and then: Tasks > Other Tasks > Edit Fields > Set Field Calculation Order
    Order the fields in the list to whatever makes sense for your form. Be sure to do this again once you have the form working like you want to make sure it's still set up correctly.

  • How do I create a form field ONLY template in Acrobat 9 Pro that will let the user enter and print only the form field data on a pre-printed form?

    This template will be used to type in information that will then be printed on an agency's official, barcoded form loaded in a printer (instead of blank paper.)  Only the user-entered info should print on the pre-printed form.  Users will use Adobe Reader to complete their templates; they do not have Acrobat.  Thank you!

    Use the template as non-printable background and add the form fields.

  • How do you create a PDF that shows up on the opening of an e-mail

    I use to be abel to create a PDF that I could drag onto the desktop of an email and it would show up as part of the e-mail when opened as well as an attatchement. Is there an actual procedure for creating one or is it random?  Sometimes it works sometimes it doesn't?

    Yakandhurl wrote:
    I use to be abel to create a PDF that I could drag onto the desktop of an email and it would show up as part of the e-mail when opened as well as an attatchement. Is there an actual procedure for creating one or is it random?  Sometimes it works sometimes it doesn't?
    There is no procedure. Whether it shows up or not is purely dependent on the receivers email application and their preferences.
    As always, I suggest if you want to do something like that, you should create an HTML email. There's a bit more control although it isn't foolproof either.

Maybe you are looking for