How do you create a section in labview using the configurat​ion file vis

I'm trying to create a new section in Labview. All i see is the possibilties to read sections and keys, write keys, delete sections. Is there a way to write a new section in Labview.
Thanks,
Brandon
Solved!
Go to Solution.

When you write to a key, you have to supply a section.  If the section isn't there, then it will be created.  Basically, you can't have a section without any keys.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • How do you create a new apple id on the iphone

    how do you create a new apple id on the iphone 4?

    Why do you want to do that?

  • How do you create and save icc profiles using photoshop?

    How do you create and save icc profiles using photoshop?

    You don't. Color profiles require specific measurement hardware and software.
    Mylenium

  • How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application?

    How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application? The DAQmx assitant won't allow me to create a task with hardware that isn't in my system.

    You will need to have at least the DAQ device in your computer to add the chassis. When you add the chassis, don't auto detect the modules. You will have to add the terminal blocks and tell MAX which SCXI module will be connected to the DAQ device. Just make sure you don't test the chassis, when its not there.
    I hope this helps.
    Joshua

  • How Can You Track Your Ipod If Lost Using The Serial Number

    How Can You Track Your Ipod If Lost Using The Serial Number?

    The find my iphone app has nothong to do with it.
    That app simply allow you to find other devices using your ipod.  It has nothing to do with fining the device on which it is installed.
    If you set up the find my ipod feature that is built into your ipod and the ipod is on and it is connected to wi-fi and it has not been restored, then you may be able to get an approximate street address using icloud.
    Othrewise, it cannot be tracked.

  • How do you create superscripts subscripts in LabVIEW?

    I want to create superscripts subscripts in LabVIEW, but those are not options in the Applications Font Dialog Box. How do I do this?

    Hi,
    If you need users to create those formulas, it can get very complex. You
    cannot have font differences (or different fonts) in one string control.
    Even if you make a font with sub and superscript included, this is no
    solution.
    If you need a static formula on the front panel, make it by using several
    text boxes. For Asubscript(2)=Asubscript(1)Xsuperscript(2), one text is A =
    A X B. The other text is smaller, and has 2 1 in it. The last has a 2
    in it. When placed in the right position, it will make a fine formula.
    If the formula must be user editable, or changeble from the program, ActiveX
    is a solution. Microsoft Rich Text Box comes to mind. However, you must make
    the interface to make the selected text sub or superscript yourself. (Or
    control i
    t from the program.) A webbrowser control in combination with
    MathML also seems logical. Both solutions are not for the faint or heart...
    Regards,
    Wiebe.
    "Jim Kane" wrote in message
    news:[email protected]..
    > I want to create superscripts subscripts in LabVIEW, but those are not
    > options in the Applications Font Dialog Box. How do I do this?

  • How do you create a program in Labview that can be run as a Windows Service?

    I would like to create a Labview program that can be run as a Windows service.  I have read the following Knowlegebase articles and have done what they say. 
    Creating a Windows NT Service Using LabVIEW http://www.ni.com/white-paper/3185/en 
    Running a LabVIEW Application as a Windows NT/2000/XP/Server 2008/7  User-Defined Service http://digital.ni.com/public.nsf/allkb/21BA0F671A63A60386256CB4004DF99B
    When trying to start the service I get an error that says the program didn't respond to the start in a timely manner.  I also set the "run when opened" parameter in the VI.  I am programming in Labivew 2010, proffesional version.  The server is running Windows Server 2008.  Can anyone help?  Is the ini file important in Windows Server 2008?

    I haven't looked through all those links.  But I have created Windows Services from LabVIEW executables way back when WinXP came on the market.
    The problem with services is that they have no UI.  So you can't really see what is going on.  Your EXE might be failing or hanging due to some kind of error (most liklely a security/permissions error), but you can't see the error.  So my advice is to either:
    1.  Have your EXE write lots of info to a log file.  Write info that log every step in the application.  If an error ocurrs, have it write the error info to the log file.  That is a very useful debugging tool.
    2.  Use VI Server functions to monitor the service to see what is going on. 

  • How do you create a bootable back up of the hard drive w/ disk utility?

    I think it's pretty incredible that the most basic of basic topics, how to create a back up of your hard drive using the native software Disc utility, is nowhwere to be found. I tried searching "create bootable back up" and amazingly enough nothing comes up. Anyway.... can anybody let me in on this top secret information, I would really appreciate it. Once again the objective is to make a bootable clone of my hard drive onto an external disk. Thanks for the help,
    -BK

        Are you saying I could still use Disk Utility's Restore function to clone a 90GB startup drive, that had 40GBs used, to a clean 60GB backup drive?
    Correct. The size of the source drive is completely irrelevant – as Kappy is saying, it's just the size of the data to be copied that counts. (An explanation that some people like is that "empty space is not copied").
        I've always used a dedicated backup drive that was larger than my startup drive
    Nothing 'wrong' with that, but unnecessary. Same size would be large enough for any future possibility. Theoretically, if you had a 250GB internal drive but knew that you would never have more than 20GB of data on it, a 40GB backup drive would be considerably more than sufficient (a bit of a silly example, but true). Other considerations: 1. you already know about the 15% free space recommendation, and 2. with drives, 'bigger' is nearly always a better investment for the future. I would always advise someone about to buy a drive to multiply the size they were thinking of by at least 4.
        always reformatted and zeroed it
    Again not 'wrong', but overkill. A simple 'erase' (2 seconds) would suffice – erased is 'clean' enough. Consider that those, like myself, who do "synchronized" backups (copying only added or changed items for the saving of time) NEVER erase the target, or just once in a blue moon. If your backup drive is stationary on your desk the chances of it developing another bad block are close to nil. The time when a re-zeroing (mapping out of bad blocks) becomes imperative is immediately after the cat knocked the drive onto the floor! We are in the main talking here about a software solution (the mapping) of a hardware problem, physical imperfections on the surface of the disk.
    =-=-=-=-
    Regarding 'other stuff' on the backup/target drive, our suggestion for CCC users is:
    [Note that this is NOT for the situation where the target is to be erased every time.]
        For your first cloning you should find a temporary home for that stuff on the external drive so that you can prepare the drive correctly [instructions…] After that you can move that 'other stuff' back onto the external drive.
        If you absolutely cannot find the needed 'temporary home' you can proceed anyway but you must take responsibilty for any consequences due to inadequate preparation of the drive (e.g. not 'zeroing' it to map out any bad blocks) – you should be OK but it is a question of luck. For subsequent clones, and for this first one if you wish to proceed, you do not need to move that 'other stuff' if you do as follows…
        You have to ensure that the clone will not interfere with that other stuff. Put all that 'other stuff' into a folder (with sub-folders as you desire) on the target (at root level, i.e. what you see when you dbl-click on the disk icon) and give that folder a unique name, i.e. a name which you know you will never use on your source drive. If you did have such a folder on the source the cloning would make the folder on the source overwrite the one on the clone, so choose the name with some thought. (How about: "Nevercall_methis"? ;=))
    A dedicated backup drive is, beyond doubt, to be highly recommended as the best arrangement. 'Other stuff' on that drive is possible, easily 'do-able', but is often the cause of complications at some stage. (Buy another drive! ;=)).
    "Buy another drive" is not just me being facetious. If you data is vital to you, you should have TWO backups on different drives. Consider this: while you are cloning/backing up, you actually have NO backup – a power outage and all, source and backup, could be lost at the same time – unlikely but not impossible. I do hate to be a harbinger of gloom, but…
    Happy cloning!  ;=)
    Moderator, forums.bombich.com

  • Acrobat 9 - how do you create a dynamic stamp to include the current date (java script)

    I have seen my question multiple places and times but the resolutions provided have not worked for me.
    I am running Acrobat 9 Pro, cannot run X or XI due to the use of ProSystem fx Engagement.
    I want to create what I thought would be a simple stamp. My initials and the current date. i.e. "crm 01/10/13".
    Simple right? I created a PDF of my initials. Now I just need the text field with the proper Java Script to insert the date, correct?
    I have tried opening "Dynamic.pdf" and copying and pasting the text field that includes the Java Script:
    " event.value = (new Date()).toString(); AFDate_FormatEx("h:MM tt, mmm dd, yyyy"); "
    The date does not update, it stays static.
    I have manually entered the Java Script.
    I have edited the Java Script to remove the "Ex".
    I have edited the Java Script to revise the "yyyy" to "yy".
    I have edited the Java Script to remove the " h:MM tt, " trying different formats to get "dd/mm/yy".
    I have selected "Use single-key accelerators to access tools" in Preferences/General.
    I have tried PDF files, PNG files. I have created the image files from Word and Excel.
    I am at my wits' end. Can someone PLEASE assist me to resolve what should be a simple issue (I hope).
    Thank you in advance.

    Thank you for your response.
    Your script works well, but I still have the same issue.  The date is remaining static to the system date when the stamp is created.  My initial idea was to create a pdf of my initials "crm" and then add the text field with the java script for the date behind my initials.  "crm" + (TEXT FIELD with JS).  I wanted 3 stamps, red, blue and green.  The colors correspond to specific processes in our workflow.
    Your script adds my initials as well as the date.
    My machine is running Windows 7.
    My stamps are located:
    C://Documents/Acrobat Stamps/...
    Acrobat templates:
    C://Program Files (x86)/Adobe/Acrobat 9.0/Acrobat/plug_ins/Annotations/Stamps/ENU/...
    I have no problem creating stamps, just a stamp that will use the current system date.  I HATE using the typewriter for my initials and the date.  I guess I can stamp my initials and then type the date...but what is the point?
    Do you have any further thoughts or suggestions?
    Thank you very much.
    crm 01/11/13 

  • How do you create new groups within Contacts on the iPad?

    Can you create new groups within Contacts directly from the iPad, iPhone,or do you have to do it on the computer first?

    The easiest way is to get the app called group e mail.  There are a couple of others as well.  There is a way to do it on your computer, and sync it, but I find that personally frustrating.  :).  Save yourself the aggrevation, and get the app, that works pretty well.

  • How do you create a shared photo stream on the ipad

    I've updated my iPad (3rd gen) to iOS 6 but I can't figure out how to create a shared photo stream.
    I've followed the instructions on apples website but it's as if the feature is missing.
    Anyone else tried using the feature?

    Went crazy since I had no "new iCloud agreement" request. Anyway I updated my account infos and finally found in Settings  > iCloud > Photo Streaming the button to enable Shared Photo Steams button

  • How do you create a finite pulse train using a FP-CTR-502?

    I have recently replaced my FP-PG-522 module with a FP-CTR-502 module, to achieve higher output frequencies (FP-PG-522 max output freq is 5kHz, wheras the FP-CTR-502 max output freq is 16 kHz).
    I need to be able to generate a finite pulse train. Has anybody created a finite pulse train using a FP-CTR-502 module before? I have started to look into it, but my ideas so far have been complicated (compared to doing it in a PG module).
    Any tips on this would be much appreciated.
    Christopher Farmer
    Certified LabVIEW Architect
    Certified TestStand Developer
    http://wiredinsoftware.com.au
    Solved!
    Go to Solution.

    I can answer this question myself!
    The answer is in the *OLD* version (July 2000) of the operator's manual for the FP-CTR-502. For some reason, this has been removed from the latest version (June 2003).
    See page 11 of this link for more information:
    http://www.ni.com/pdf/manuals/322660a.pdf
    Christopher Farmer
    Certified LabVIEW Architect
    Certified TestStand Developer
    http://wiredinsoftware.com.au

  • HOw do I create a ringtone for iphone5 using the new itunes

    How can I create a ringtone for my iphone 5 using the newest version of itunes. Thanks

    This article takes you through the process
    http://www.simonblog.com/2012/12/01/itunes-11-how-to-create-free-ringtone-and-te xt-tone/

  • HT5537 How do you import/export garage band projects using the latest version of iTunes when there is no apps in the left column to select garageband?

    I am perfectly aware of how to do this using the old version of itunes.
    however i just got a new macbook pro retina... and it came with the latest version of itunes.
    and i was trying to import/export garage band files between my ipad and mac via itunes.
    and the option for apps, that is usually on the left side where you can then select garage band from in itunes, isnt there in the new version of itunes.
    has anyone got a work around for this?
    thanks.
    nic

    Nic, for me the iTunes window looks like this, when I connect my iPad 3:
    I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
    Click the "Apps" tab in the "Devices" pane.
    Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
    Then do I click "GarageBand" to select the documents in the right panel.
    Which part is different for you? Perhaps you could post a screenshot?
    Regards
    Léonie

  • How can I Save and Load the Configurat​ion File of a VNA HP8510C with LabView

    Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
    Has someone already deal with such a question?
    Géraud DEVOS
    IWE Karlsruhe

    geraudIWE a écrit:
    Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
    Has someone already deal with such a question?
    Géraud DEVOS
    IWE Karlsruhe
    Hello GerauIWE,
    Have you try to use the Hewlett-Packard 8510C Instrument Driver?
    You can download it on :
    http://sine.ni.com/apps/we/niid_web_display.drv_re​sults?p_app_area=&p_man=hewlettPackard&p_keywords=​8510c&p_inst_type=&p_env=845&p_drv_type=&p_int=
    Best Regards,
    Sanaa T
    National Instruments France
    Sanaa T.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

Maybe you are looking for