How do you create a shot that has several different video "layers"?

I saw an episode of Workaholics where Adam stays up all night and there is a part where he is sitting on the kitchen floor but there is a "second" Adam running around the house at the same time. I would like to try and recreate this but I'm new to Premiere and I don't know the exact terminology that would explain this better. For reference, it is episode 12 "telamerican horror story" of season 3.
Thanks!

That scene could be a problem.
The guy through the doorway is easy as is one of the two guys at the refridgerator.
But as soon as one of those two guys crosses the other, a 30 minute edit just became an hour of pain and suffering, or more, to edit each and every frame individually. If you are practiced at it, then fine. Otherwise, plan to devote an hour per frame for the first few frames.
Also, when you shoot the scene, you must, I repeat, MUST have your lighting under control. No sunshine, no stars, no Moon, nothing external coming in anywhere. Otherwise, if your lighting changes, you will spend a LOT of time fixing it, and it still won't be perfect.
One other thing. Your tripod has to be very sturdy and locked down absolutely tight. The slightest movement will completely ruin the scene.
However, with proper lighting, a steady tripod, and an actor/actress who hits their marks and never crosses over the boundaries between characters, it is a pretty easy job to get two, three, or even more instances done in just a few minutes.

Similar Messages

  • How do you create a part that has two through holes with a single net connecting to both.

    I attempted to create a part that contained 2 through holes with a copper strip between them so they would connect to a single net, but one of the holes (pin 2) gets rejected by Ultiboard as an unconnected entitiy. Is there a way to define the second hole (pin 2) in such a way as to mitigate the problem?
    Thanks, Tod
    Solved!
    Go to Solution.

     Hi
    It is quite simple to do so:
    when making the footprint, you just put your two TH pins where you need them. name them 1 and 2.
    Then in Multisim, when making a new component with the component wizzard,in step 2 make a 1-pin component, and select your desired footprint(which has two pins).
    thenin step 3, make/choose your 1-pin symbol.
    In step 5 you can map the footprint to the symbol , just use both footprint pins for the same symbol pin.
    When using it in your schematic, you'll see one pin, in the layout, there will be two pins connected together..
    Good luck
    stressed user..

  • How do you create a form that has user permissions per form field for different user?

    I need to create a form that is used by multi people but each user needs to fill out different fields within the form. I need the first user to make selections from a list and save it to send to another (the selection fields then need to be locked). Then the other user checks one of the selections made by the first user and saves the document to send back to the first user. Not sure if this is possible. I would like the first form field selections not to even show as a highlighted field to the other user (like just be more like a text field). I want the document to be able to be used more than once. The list selections will change and need to be sent to the other user at least once a month or more. Has anyone done this?

    There's no built-in way to do that, but it's probably doable using a custom-made script to hide and/or lock the fields.

  • Can you create a template that has a header and footer to forms?

    Can you create a template that has a header and footer to forms?

    Yes but how are they going to create the Landscape versions?
    The problem with doing it in Pages '09 as rotated content is that the Headers and Footers are not rotated and there is inherent clumsiness in the rotated content usually being too large for the page when viewed at 90°.
    Best to make it in two or more separate documents.
    Peter

  • How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • How do i create a report that has drill-down with class?

    How do I create a report that has drill-down levels so that I can have summary information at the top level but then view specific records at a more detailed level?

    can i know ur email address.
    this is my other one coding
    but problem is very very slow when i 1 see my output
    TABLES: proj, coep.
    *&            TYPES DECLARATION                                        *
    *TYPES: BEGIN OF tb_coep,
             wtgbtr TYPE coep-wtgbtr,
          END OF tb_coep.
    DATA : int_proj TYPE proj OCCURS 0 WITH HEADER LINE.
    DATA : int_coep TYPE coep OCCURS 0 WITH HEADER LINE.
    DATA : gd_date(10). " FIELD TO STORE OUTPUT DATE
    TYPES : BEGIN OF t_date,
              year(4)  TYPE n,
              month(2) TYPE n,
              day(2)   TYPE n,
           END OF t_date.
    *&            SELECTION-SCREEN                                         *
    SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: so_pspnr FOR proj-pspnr OBLIGATORY.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN END OF BLOCK b01.
    *&            TOP-OF-PAGE                                              *
    *&            fetch the data for the list                              *
    SELECT * INTO int_proj FROM proj where
             pspnr in so_pspnr.
    append int_proj.
    CLEAR int_proj.
    ENDSELECT.
    SELECT * into int_coep FROM coep WHERE
             wtgbtr in so_pspnr.
    append int_coep.
    CLEAR int_coep.
    ENDSELECT.
    LOOP at int_proj.
      write : / int_proj-pspnr, int_proj-post1.
    ENDLOOP.
    LOOP at int_coep.
      write : int_coep-wtgbtr.
    ENDLOOP.
    Edited by: Dickson on Jul 10, 2009 10:53 AM

  • How can you find an ipod that has been lost

    how can you find an ipod that has been lost and the icloud is not turned on

    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How do you open a picture that has had text added using software such as Windows Photo Gallery?

    How do you open a picture that has had text added using software such as Windows Photo Gallery?

    In Editor, go to File menu>open, and point to where the photo file is on disk.

  • How Can You Track a Person That Has Your IPhone And You Want It Back

    How Can You Track a Person That Stole Your IPhone And You Want It Back

    Log into icloud.com with your Apple ID and use Find my iPhone to track it. If it can't be located that way, there is no way to track it.

  • How do you recover an app that has been downloaded already but got deleted by accident,but don't have a credit card

    HHow do you recover an app that has been deleted.?

    I've asked this thread be moved to the iPad forum.  iPads can't run Classic operating systems:
    Using iPad

  • How can you create a playlist with music and music video and play those from same playlist through Apple TV?

    How can you create a playlist on Ipod touch with music and music video,  and play those from same playlist through Apple TV?  I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem.  The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
    I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one.  I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

    I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
    Message was edited by: jpewald

  • How can I create a subVI that has state?

    I'm trying to simplify a VI that I inherited and I noticed a recurring pattern that IMHO should be a subVI.  The pattern is that we have a digital output line that is controlled by a timer.  Each output has a start time for it to activate and a duration after which it is turned off.  When the state changes, a single line entry is added to a common log file and an indicator shared variable is set so that the remote host VI updates.  We have a big while loop that checks the current time against each of the activation conditions.  To detect when the state has changed, we're using a shift register (for each actuator).  It's one thing to see the same pattern 3 times, but it's worse -- we want to sometimes use a different number of actuators.  If I was writing this in C++ (with which I'm far more comfortable than LabView), I'd write a class for the actuator and instantiate it N times.  The class would have member data to keep track of its state.  I can create a subVI that does the meat of the design pattern, but I can't figure out how to store the previous state in the subVI without requiring it to be passed in.  How do I keep the state and behavior of a VI together?  Surely there's a way to do this because otherwise I can't see how you could implement state-ful algorithms like, say, a PID controller.  But I'm at a loss to figure it out ...
    Thanks.
    Keith.

    To save state in a subVI and not use that state in other subVI calls, make the subVI reentrant.  When a subVI that is reentrant is called it creates a unique memory space for that subVI.  This is called a clone.  That memory space is where state is held for that subVI.  Keep in mind that it also means that the memory footprint is going to be larger.
    To set a subVI to be reentrant, open it and go to File -> VI Properties and select execution.  It will be a choice on the bottom left.
    Hope that this helps,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • How do you create a PDF that shows up on the opening of an e-mail

    I use to be abel to create a PDF that I could drag onto the desktop of an email and it would show up as part of the e-mail when opened as well as an attatchement. Is there an actual procedure for creating one or is it random?  Sometimes it works sometimes it doesn't?

    Yakandhurl wrote:
    I use to be abel to create a PDF that I could drag onto the desktop of an email and it would show up as part of the e-mail when opened as well as an attatchement. Is there an actual procedure for creating one or is it random?  Sometimes it works sometimes it doesn't?
    There is no procedure. Whether it shows up or not is purely dependent on the receivers email application and their preferences.
    As always, I suggest if you want to do something like that, you should create an HTML email. There's a bit more control although it isn't foolproof either.

  • I have something simple...how do you delete a song that has been purchased numerous times?

    I have an ipod nano, 7th gen, and have downloaded the same song a few times. How do you get rid of 2 of them? Thanks.

    TkMcCray wrote:
    I didn't have my backup assist on when I wrote the paper. I have set it up now. But like everyone stated it is gone, so I am rewriting it now and using this as a learning lesson. Thanks for your help
    He meant, do you have a system backup via Time Machine, Carbon Copy Cloner, etc.?  That's the shortest way to restore your complete system and data when (not if) your hard drive dies.
    Have a nice day.

  • How do you create a graph in numbers with different x-values?

    For my chemistry class I have to create one scatter plot with three different sets of "x" and "y" values. I have done it before but it is not working. What is an easy way to accomplish this?

    All X and Y data has to be in regular cells, nothing in header rows or header columns. It should be organized as X1,Y1,X2,Y2, etc.
    Select all the data
    Choose to make a scatter chart
    At the bottom left of the Numbers window there is a little text box that probably says "Plot Columns as Series". Click on it and unselect "Share X Values"
    It is beyond me why Apple put that control in the bottom left corner in a place where you wouldn't think to look because it is far from the chart and far from the table and far from all the other controls you will be using to create and format the chart..

Maybe you are looking for

  • How do I manage my itunes account and icloud account

    I have one user name for itunes and a different user name for Icloud (which was merged from mobile me). They are both acitve but not connected. Think of Find My Phone - I can log in with Itunes account and find some devices - Log in with Icloud to fi

  • What are the key steps & order to follow: changes in my flat file structure

    HI, I have a Cube which sits on ODS. In the ODS,  the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3. The ODS is loaded through a flat file. Through an update rule and startup routine, the ODS updates the cube. N

  • Error in Control Framework in smart forms programms

    IN VF02 smartforms ENTRY form , I add a function about save PDF at local PC. When I print the smartfomrs,There is ERROR message in update modules. IN SM13 can see the ERROR message.  Function Module: RV_MESSAGE_UPDATE Status :Update was terminated Er

  • IPhoto can't be opened

    Late last night the Mac App Store offered an update to iPhoto 11.  I think the version offered was v9.1.4.  I clicked the Update button and it downloaded and installed with no problems.  I even used iPhoto briefly after the update.  About 15-30 minut

  • Item null when using PL/SQL function body returning SQL query

    I have an item P5_CUSTOMER_ID (text). Whatever be the value I enter in this text box, the PL/SQL seems to execute the ELSE condition. What am I missing? I am using 2.0 and 10g Oracle. Declare qry VARCHAR2(1000); Begin IF :P5_CUSTOMER_ID IS NOT NULL T