How do you create a smooth slow motion

Attached are both the original clip, 2 second long, and 5 times slower clip of the original.
for some reason the slow motion is not smooth. is there a way to make it smooth?
thanks
arikw

If your camcorder can shoot 60p, import that clip, then right-click it and Modify > Interpret. The frame rate should show up as 59.94, go ahead and change that to 29.97 and then put the clip on the timeline. This should have the result of doubling the length of the clip and providing silky smooth 50% slow motion (without adding Speed Change, leave that at 100%).
Just picked up a new GoPro Hero 3 White, and it has 720p60 and I tried the above and it looks nice! The more expensive GoPros offer 720p120 and that should yield excellent 25% slow motion using the same methods. With the waterproof housing and wide angle lens, you could get right up close to that waterfall!
Thanks
Jeff

Similar Messages

How do you add video effects-slow motion

Not real happy with 08 over previous versions but I would like to gain back some of the functionality that I regularly used. How do I add special effects, such as slow motion to a video clip or a portion of a video clip.

How do you do it IMovie HD in Ilife 08?
Both applications can be run on the same computer. Use whichever application best serves your needs. If you need a lot of plug-in effects, use HD. If few or nor effects other than standard transitions and titles are required and speed is paramount, then use iMovie '08. If you like being innovative and want to try your hand at creating your own effects, use iMovie '08 and learn how perform pre- and post-edits to create your own fast motion, slow motion, stop motion, pseudo time lapse, still framed, backgrounded, blended, layered, picture-in-picture, etc. that may "tickle your fancy."

How do you install "Twixtor" excellent Slow Motion plug in for FCP

Hi,
I have the Twixtor FxPlug Pro v5.0.1 but can't get to install it properly.
I have seen some posts in the web but for me there is no clue how to install it.
The installer installs it in the root of HD folder, but later they say you have to "move" it where the plug ins for FCP are.... which I don't know....
The only links I found of help, but in my case I could'n solve it, were:
http://www.cinema5d.com/viewtopic.php?f=24&t=21416&start=0&st=0&sk=t&sd=a
http://discussions.apple.com/message.jspa?messageID=3188319
Any one can help with this? THANKS!

installation instructions are all on there web site:
[plugin installation|http://www.geniusdv.com/newsand_tutorials/2008/01/where_to_put_plug_ins_in_final_cutpro.php]

How do you turn off the slow motion mode for safari and other apps?

I would love to be able to run other apps at regular spped while waiting for them to lode, ect. How do I change this?

I think your answer is there:
http://www.wired.com/gadgetlab/2013/10/how-to-use-os-x-mavericks/#slideid-227971

Smooth Slow Motion from 50 fps Clip in 50 fps Timeline

If I want 50% smooth slow motion from a 50 FPS video clip, I would normally ask PP to interpret that clip as 25 FPS - that works great.
If however I import the 50 FPS video clip and interprett it as 50 FPS, I would have to set the speed of the video clip in the timeline to 50% to get the same level of slow motion.
The question is - when I follow the latter method, does PP create new frames for the slow motion or is it clever enough to use all the frames from the original 50 FPS video clip? to put it another away, does PP always generate NEW frames for slow motion or does it try to use the frames we are attempting to ignore?
I've done some basic tests and so far I can't see any real difference between the two methods. This leads me to beleive PP is effectively using all of the original 50 frames when the 50 fps video clip is imported into a 50 fps timeline and then slowed down in the timeline by 50%. - if this is the case, well done PP!!! If this is not the case, then it would be a welcomed enhancement in future releases.
I guess what you are all wondering is why would I want to import a 50 fps video clip into a 50 fps timeline and then slow it down in the timeline - well, as a wedding Videographer, it is simply because some parts of the video need to be in slow motion and other parts like messages and speeches need to be interpreted at normal speed. If playback in the timeline is at normal speed, i find it simpler to slow down the "Walking Down the Isle" clips rather than having to speed up the speeaches and messages.
In short, when importing 50 fps video for smooth slow motion, are both the following methods equally effective in terms of smooth motion?
Method 1: Import the 50 fps video clip into 25 fps timeline
Method 2: import the 50 fps video clip into 50 fps timeline and set the speed of the video clip in the timeline to 50% - I'm assuming PP does not generate new frames and gets them from the original 50 fps file instead..
To put it another way, does PP ALWAYS attempt to generate new fromes when slowing down video in the timeline? When extra frames are available in the original video file, does PP try to get the extra frames from that file instead of generating new ones?

I recorded 2 video clips of the same scene. The camera was panning from right to left.
First video clip - recorded at 25 fps
second video clip - recorded at 50 fps
Both video clips recorded at the same panning speed of the same scene.
1. If I import the 25 fps video into 25 fps timeline and slow it down by 50%, the exported video looks jerky.
2. If I import the 50 fps video clip into 25 fps timeline, the exported video looks smooth motion.
3. If I import the 50 fps video clip into 50 fps timeline, slow it down in the timeline by 50%, and export the video as 25 fps then the result is still smooth motion.
I've only done the experiment once and may have to repeat to be absolutely sure.

Smooth Slow Motion

I am looking for a way to create 50 percent slow motion based on odd and even fields. Instead of replicating the odd or even field to make a 15 frames per second, jittery, slow motion, I want to separate the odd and even field, and then interpolate the missing half frame, thus producing a 30 frame per second smooth motion clip that is based on the 60 half frames per second frame rate of video. I know this can be done because Premiere does it automatically. Note: I am not trying to make smooth motion where there is a half translucent image of the preceding frame always on top of the current frame.

Okay, I think Graeme Nattress wrote a plugin to do that, but here's a way to do it in FCP...
Cut your clip on V1 and V2, slow each down 50% with no frame blending. On each clip put the de-interlace filter, on V1 take it from field 1, on V2 take it from field 2. Now apply the blink filter and set it for 1 frame on and 1 frame off. This way it will take first one frame from V1, then one from V2, etc...
Mind you this is a lot of monkey motion, but it should give you the effect you are looking for.
Try it, post back...
Patrick

Cool effect..how can i create this effect on Motion 3?

that's great.
Someone please tell me how can i create this effect on motion 3?
http://www.ayatoweb.com/aetips_e/ae17_mov05e.html
thanks

Use the bezier tool to create your shapes, give the shapes an Airbrush outline. Then apply a Write On behavior to each shape. Position the shapes in the timeline so they appear sequentially. To achieve the zooming out effect, you can either scale the whole group, or convert the group to 3D and use the camera to zoom out.

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

The steps would be :
- Add files from file menu > select pdf > add to site
- Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
- Select the file you want to link
Thanks,
Sanjit

How do you create a new apple id on the iphone

how do you create a new apple id on the iphone 4?

Why do you want to do that?

How would you create a read/display only applicaiton montior role for SRM

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

How do you create a new account for a family member?

My daughter and I both have Ipods, and want to setup SEPARATE accounts. Itunes 7 worked great, but now when we 'upgraded' to 8, it MERGED all our files. So I thought I had a separate account, but it turns out when I load a new song, it goes into HER Itunes files. She deleted all my info, and I REALLY want a separate account (that sticks).
My songs are still in my directory under "Mikes Itunes", but when I reloaded them into what I thought was a fresh entry, it turns out it went into my daughter's Itunes file too! What is up with Itunes 8? and how can you create a TRUE separate account so I have control over MY songs!?

First, let's make it easier to swap between accounts. In the Accounts pane of System Preferences click on the Login Options (after unlocking the pane). Enable fast user switching. This will put a new menu in the top right of the screen. You can then swap to the other account without having to log out of the current one.
Log into the original account. Select the folder you want access from the other account and choose Get Info from the file menu. There is a section called Sharing & Permissions. You will need to click on the padlock to make changes. Click on the + to add permissions for the other user account by selecting the user account from list that appears. Set the permission for that account to read only. Once you have it listed then choose the "Apply to enclosed items" from the gear menu below the list. This should give you access from the other account to that folder and any folders contained in it.
For iTunes you will want to do this to the Music folder, giving you access to the files below. From within iTunes you can select Add to Library from the file menu, and then select the music from the other account to that account's iTunes library. Once you have set up the new library whoever's library is the original can clean up the library to remove any music they don't want (now that it's in the new account).

How do you create an AcrobatXI zip file in windows 8.1?

How do you create an AcrobatXI zip file in windows 8.1? from acrobat.com docs? Sorry Not sure what community to ask this in this community? The email provider I was using didn''t seem to want to accept it through Adobe Send the first time and since Adobe Send ends January 6, I am assuming a zip file is preferable.. I thought I had seen an Adobe Zip file somewhere but haven't been able to locate it. Any help appreciated.
Thank you.
Sherrie

Hi Sherrie L,
Adobe Send is Adobe's current solution for sending large files. (It's Adobe SendNow that's retiring soon.) Can you tell us what trouble you were running into using Adobe Send?
There isn't a special version of Zip files for Acrobat, but you could reduce the PDF file size if you have Acrobat. Or, in Windows, you can create a Zip file by choosing File > Send to > Compressed (Zipped) Folder.
Best,
Sara

How can you create a spry menu bar with no background colour?

How can you create the first level of a spry menu bar to have no colour? I have a coloured background right now and the colour matches when you load the site in Internet explorer but does not match in Firefox. Any suggestions are welcomed on how to fix this.
Thanks!
HK

Here is the site:
http://partnersnaturally.ca/
I am learning with code, (obviously) so any feedback would be nice. I use dreamweaver CS4, but when I originally designed the site it was in a much older version of dreamweaver. I wonder if that could also be a cause. (besides human error)
Thanks again,
HK

How do you create a smooth slow motion

Similar Messages

Maybe you are looking for