How do you crete an "unrendered look" in Final Cut Pro 7?

Hi guys,
Does anybody know how to crete an "unrendered look" in Final Cut Pro 7?
What video filter do you apply?
I'm trying to create a security Camera Look and I can't find the right filter.
Any help ?
Thanks.

Depending on the look you are looking for there really isn't one filter to do this it is more likely a combination of things.
One approach:
Play with the color correction filters and composite modes with a duplicate clip on the layer above.
and if you want  noise try this:
http://www.geniusdv.com/news_and_tutorials/2009/05/using_the_noise_generator_in_ final_cut_pro.php

Similar Messages

  • How can you fix corrupt Project Files in Final Cut Pro X?

    Hello All,
    I have reason to believe that one of my project files in Final Cut Pro X is corrupt.
    How may I begin to resolve this issue?  Is there a third party software someone could recommend, like Digital Rebellion (if they have software for FCP X, I'm not sure) that may improve, if not hopefully solve this issue?
    Many thanks!!
    Molly

    Had a similar problem.
    Follow it here:
    http://www.fcp.co/forum/4-final-cut-pro-x-fcpx/11076-freeze-during-export
    among other steps taken I used Corrupt Clip Finder to isolate/remove the culprit and all was OK after that
    no idea how/why the file ( which I''d been using over 5 previous versions) became corrupted

  • How can you create a swish pan in Final Cut X?

    How can you create a swish pan in Final Cut X?

    Andy's - http://andymees.wordpress.com/swish-transitions/
      How's that for service?
    Cheers!

  • How do i create a spotlight effect in final cut pro x

    How do i create a spolight effect in final cut pro x any help would be greatly recieved!!
    all i can find is tutorials for how to do the effect in the older version of final cut
    Many thanks!

    In the Timeline position your Playhead at the starting position.
    In the Viewport position the Shape Mask at the starting position.
    In the Inspector click the Add Keyframe button.
    Press Control-V to open the Animation Editor to see your keyframes.
    Move the Playhead and the Shape Mask to a new position.
    In the Inspector click the Add Keyframe button.
    Continue adding keyframes until you have defined the Shape Mask’s movement.
    Regards
    Nolan

  • How do I import a .fcpproject file into final cut pro?

    How do I import a .fcpproject file into final cut pro?

    You don't. The application opens it when it recognizes it in the correct folder structure.

  • How to create an install cd with the final cut pro x app if the app comes from App.Store?

    How to create an install cd with the final cut pro x app if the app comes from App.Store?

    Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

  • How to play an HD movie exported from Final Cut Pro?

    How to play an HD movie exported from Final Cut Pro? on a mac???
    thanks

    How to play an HD movie exported from Final Cut Pro? on a mac?
    Most FCP users export them in a high-effeciency distribution/delivery compression format (e,g,, H.264/AAC) targeted for a particular application and/or device. For example, you could export using H.264/AAC at full display resolution for playback in the QT Player at an appropriate data rate if your platform and display can handle the output. TV would limid the video to 960x540 at 30/29.97 fps and normal AAC audio to 160 kbps at 48.0 KHz. Files exported for display an the Internet would be restricted by the bandwidth being targeted. Etc, etc, etc. Unless the file will only be played on your own platform, what you do not want to do is use an FCP only compression format which would limit viewers to those recipients have the same FCP codecs installed.

  • How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

    How do I revert to original footage in Final Cut Pro X version 10.0.9?
    For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
    Only the edited version which is no good without the audio?
    Please  Help

    What format is your problem clip? Are there wave forms visible in the section without sound?
    Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
    Russ

  • How do i reverse the stereo pan in Final Cut Pro X

    how do i reverse the stereo pan in Final Cut Pro X

    For anyone that wants to know: Final Cut Pro X: Configure audio channels

  • How much does it cost to upgrade to Final Cut Pro X? I have Final Cut Studio

    how much does it cost to upgrade to Final Cut Pro X? I have Final Cut Studio

    There is no upgrade. One price only. $299.

  • How to work efficiently with HDV footage in Final Cut Pro 6

    Hello everyone! I am fairly new to Final Cut & Mac. I have worked with Final Cut Pro 5 on my Powerbook G4 two years ago. But when I moved to HD, I switched to a PC with Adobe Premiere. Recently, I made the move back to Final Cut as I had problem with the stability of both Premiere 2.0 and CS3. I am really happy with it so far. In Premiere, I used the Cineform codec which performed very well. I also got a license for their MAC codec but unfortunately, I still have to capture under Windows.
    Since I have not worked with HDV on the Mac before, I have a few questions which I hope people on these boards can answer.
    1) How does Final Cut Pro 6 handle native HDV?
    2) Is it beneficial to convert to Pro Res 422 (in terms of quality, but also in terms of editing speed, rendering time, in favor of processing speed etc.)
    3) Which Pro Res 422 setting is advised? I will be capturing HDV through firewire and then recompress to Pro Res 422. The Canon XL-H1 squeezes 1080i into 1440x1080. So I figured I need the 1440x1080 setting. There are two options: normal and (HQ). The HQ files are around 4-times bigger then the native HDV file. The normal setting results in files around 2-times bigger. Coming from HDV, do I see the difference between normal and HQ?
    4) What systems are recommended so I can work efficiently? i.e. how to setup the scratch disks. I currently have the applications installed on Disk 1, all scratch disks on Disk 2 + 3 (RAID 0) and final results on Disk 4.
    I have the following system setup:
    - Apple Mac Pro Quad-Core (2.66Ghz)
    - 5GB of RAM
    - ATI X1900XT 512MB
    - Harddisks:
    -1- Western Digital 750GB SE
    -2- Western Digital 500GB RE2 (member of "VIDEO" - raid 0)
    -3- Western Digital 500GB RE2 (member of "VIDEO" - raid 0)
    -4- Western Digital 500GB SE
    - Two Dell 2407 FWP 24" LCD monitors
    Thanks for your help and don't feel obliged to answer all questions, I am already happy if one of them is answered!!

    1) How does Final Cut Pro 6 handle native HDV?
    Just like FC5.... no worries
    2) Is it beneficial to convert to Pro Res 422
    Just like the Cineform codec you will benefit from an all i-frame codec when working with titles and graphics. I wouldn't recommend capturing native then converting to ProRez as this will take an extremely long time. Many have found editing native up until the compositing then dropping the sequence into a ProRez timeline to render. I prefer to uncompress the HDV with hardware into a capture card and transcode on capture in real time. Depending on the flavor of HDV and the equipment you use you can probably find a method for this. I shoot run & gun field work on to tape, then with the deck I can export via HDMI and together with another product from Convergent Design it is converted to HD-SDI in the a Kona LHe into FC. The benefit for me is the all digital decompression from 1440x1080 4:2:0 to a 1920x1080 4:2:2 uncompressed HD-SDI signal to use anyway I need to. As to which level of PR I can't comment but I have used the lower level and it looks great. As to raid setup I can recommend www.maxupgrades.com to help you add two - four more drives internally for unbelievable speed and expanded storage space you will want. The owner (Syed) will give you all the support you need to take advantage of the Mac Pro capabilities for a low cost high performance raid solution. Sounds like you have a great setup in mind, you may want to look into the Kona LHe capture card for capturing and monitoring and a Convergent Design product like the HD-Connect SI or MI depending on the deck you are using. If you need broadcast quality monitoring look into the Matrox MXO.
    Good Luck
    Z1

  • Creating a film look in Final Cut Pro 3

    I have finished editing my short in and some of the images are too harsh; please advise me on how I can get a more film like look. I shot the short on a Sony PD-150 and edited it on Final Cut Pro 3 using a G4 and running OS X. 2.6
    A friend suggested using a filter like Magic Bullet, which doesn't work on OS X. 2.6. Someone else suggested rendering it in 30 frames per second but don't know how to do that in FCP.
    G4   Mac OS X (10.2.x)  

    You're not going to be able to make magic happen with DV footage on final cut 3. Film has a generally softer and murkier look than video, so try bringing down the harsher higlights and desaturing colors somewhat. You're just going to have to play arround with the the filters and color corrector, and eyeball it on a broadcast monitor.
    As far as frame rate is concerned, there's nothing you can do. DV is 29.97fps, film is 24fps. Simply changing the framerate (especially to 30) won't make it look more film like. 24 fps pulldown needs to happen in camera to achieve such an effect.
    If you're interested in something like Magic Bullet (which you'll have far better luck with), you'll have to find someone who has it.
    Honestly, my advice would be to worry about your film looking good more than worry about your film looking like film.

  • How to achieve the distort motion effect ala Final Cut Pro in Premiere CS4?

    Newbie here.
    I have just recently started with video editing. In Final Cut Pro I have the option to distort a still image in the motion/effects panel. In premiere cs4 I only find the option to scale it up/down without the option to individually distort the four corners. Does anyone know how this can be done in premiere cs4?
    The effect i am going for is the same as in Apples presentation of iPad. http://www.apple.com/quicktime/qtv/specialevent0110/
    I have an presentation wich I need to insert all the slides from the powerpoint presentation in the video.
    Any help would be appreciated. ( I have searched around for an solution, but without results)
    Regards T

    Here is a resource, that deserves a bookmark, the PrPro-Wiki. Plenty of great FAQ articles and tutorials.
    I see the "Distort" part of the Effect in FCP, but the "Motion" aspect was throwing me. I kept thinking Posterize Time, and that is anything but what you were looking for. That's why I was going to head to Google for the FCP Help files, or similar.
    Good luck,
    Hunt

  • How do I connect my DSLR camera to Final Cut Pro's Camera Import?

    I recently purchased a Canon EOS Rebel T3i. I am trying to get it to record directly into Final Cut Pro, but I can't figure out how.
    It does not have a FireWire port, just a USB and HDMI output. I'm thinking it's going to need to output to the HDMI port and have some sort of interface between the Mac and the HDMI cable, but I would prefer to record directly using the USB cable.
    I was wondering if anyone knows how to do this and/or has done it before. Any help is greatly appreciated.
    Thanks!
    Zane

    I haven't got a DSLR but I think they probably import like most AVCHD camcorders.
    You connect it with a USB cable and switch it on.
    You then set FCP X to import the video clips.

  • How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

    Hi
    I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
    Here are the settings:
    HD:
    1 Video CODEC                 XDCAMHD50
    2 Wrapper format           QuickTime Self-Contained
    3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
    4 GOP                                   Long GOP
                                                 Closed GOP
    5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
    6 Movie version               UK Home Video Version
    7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
    1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                              1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
    2 Resolution                      1280 x 720
                                               1920 x 1080
    3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
    4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
    5 Chroma format              4:2:2
    1 HD audio format           24 bits/sample 48 kHz sampling rate
    2 Track layout                    Track 1 – 2.0 Stereo L mono
                                                Track 2 – 2.0 Stereo R mono
                                                Track 3 – L
                                                Track 4 – R
                                                Track 5 – C
                                                Track 6 - Low frequency effects LFE
                                                Track 7 – L Surround
                                                Track 8 – R Surround

    First of all, what are your sequence settings?  Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this).  Do you have a surround sound mix?  
    You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs. 
    Do you understand about safe zones for graphics?  If not, post back.
    I don't see any option to set the GOP in xdcam in compressor.  This may be built in to the xdcam format.
    I don't see any option for 720 xdcam hd in compressor. 
    There are many other tools available for this kind of work, but they may be out of your price range.  You might want to just find a facility with experience in deliverying this sort of thing.

Maybe you are looking for

  • Plan values not being displayed in the report ..

    Hi All, I have a query on query.. . which displays actual and plan values , but the report is not showing the plan values tell me how to do this Sruthi

  • Why can't I get music videos to NOT sync on the iPad

    So I have recently updated to iOS 7 on my daughter's iPad 2.  Out of the blue, now because not before, all the music videos on my computer sync to her iPad.  I have the include music videos unchecked under music.  I have the sync only checked songs a

  • Posting Block in Down payment-F-48

    Hello, Need your help i have a strange situation 1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically 2) F-48 and document posted with document no= 15..... in company code =

  • Can I use other page than "1" as cover?

    Hello I would like to start my publication in page 3, instead off 1, to make an visual effect is it posssible? Thank you! m

  • New Document panel does not accept inputs

    I am new user of InDesign, newly installed. I cannot get the "New Document" panel to accept any keyboard entries except "Page size" label, "Orientation" and "Number of Pages". It will not accept width, height, column numbers or margins. Is there some