How do you crop outside of the project dimensions?

I have footage that's shot in 2.7k resolution. But my project is only 1080. When I put the clip into the project I think it's auto cropped into 1080 that's great. But I want to use the extra resolution for my own cropping. Maybe there's a corner I want to focus in. Or maybe I want to use the extra resolution for stablization. How do I do that?

Select the clips you want to reframe in the project and in the video inspector change the spatial conform to none.

Similar Messages

  • How do you crop QT file for projection on a video projector?

    Trying to output QT files for playback on video projector in normal NTSC 4:3 aspect...the projector will be hooked up to a PC and play thru whatever inane video player the PC uses...therefore it will be displaying more of the image than a normal 4:3 frame....
    problem is: in my FCP project I shifted some images in the 4:3 frame using the Motion tab...thererfore when they are played in QT player or on a computer, or thru a projector (as in this case) the extra bits of the image off to the side and top and bottom that would never be visible on a 4:3 frame are now visible...
    if I crop the image, then I get a black box around the outside...do I resize the output file in terms of pixels or do I have to create a mask in QT to play without a black border?
    Please help.

    I see - you're concerned about blanking and other 'blackspace.'
    If that's the case, try this:
    Drop your QT movie into Compressor 3
    Apply the DV-NTSC setting (under Advanced Format Conversions)
    In the Geometry Pane, adjust the Crop values for the 4 edges to taste (I'd highly recommend scrubbing thru to make sure you've not over/undercropping).
    I'd personally recommend dragging the red borders in the Preview window, just be aware of a small screen bug where it squishes the image (if only in the Preview window). To counteract that, hit the Back arrow button in the Preview window (top left), then hit the Forward button. Toggling between the source file (by hitting back) and destination file (by hit forward) allows the image to 'pop back' correctly.
    If you were only worried about blanking - the black edges that cameras produce, then you'd only need to crop maybe 8 pixels from the left and right. But since you've got more stuff to worry about it, it's hard to suggest what to do, exactly. But remember to crop according to aspect ratio. That is, if you're taking 8 pixels off the left and right each, you've got to take 6 off the top and bottom each (aka keep the trims 4:3) otherwise you'll distort your image, however slightly.
    Confirm that Frame Controls are activated and that Resize is set to Better. (This will dramatically increase encoding time, but otherwise, your output will be very poor). However, unless you're working on a very robust machine (or have a lot of time to kill), I would not adjust any setting to Best - it simply takes too long.
    Submit. And wait for it.
    You output will now be a 720x480 file with no blanking or other 'blackspace.' If you've got Frame Controls set right, you shouldn't see much, if any, reduction in image quality.

  • How do you order topics within the Project Manager?

    Hi all,
    I notice that the workflow in RH is that first you use the
    Project Manager (PM) to build a sort of structured topic database,
    and then you use the database to generate a TOC.
    Ok, so far so good, but the immediate little issue I am
    having is that I see that the PM arranges my topics within each
    folder in alphabetical order. Since, by default, the TOC is
    generated with the topics in this default order, I would like to
    change the order in which the topics are arranged within the PM. I
    don't seem to find any way to do this. I can't drag and there are
    no Move buttons for this pod. What am I missing?
    TIA
    - avi

    Hi Avi
    You aren't missing anything. That's the way it works with the
    Project Manager Pod. It simply lists your topic files in
    alphabetical order.
    For starters, I would never recommend that anyone always
    automatically create the TOC. I might suggest using that only as a
    first step in building a TOC. After it has been built initially,
    any added or amended topics would then be manually added and
    rearranged by you after the changes have been made.
    Unless you are happy with things that way (and I assume you
    aren't as you are posting to ask how to make it different) you will
    find yourself constantly frustrated. Note that if you auto create
    the TOC, you get ALL topics inside. And in many help files there
    are topics that never see the light of day in the TOC structure.
    All that aside, I do see a great many folks that want to have
    an ability to arrange topics in their Project Manager pod as they
    want. For you and anyone else that wants this, you should consider
    submitting a Wish Form to ask for the feature.
    Click
    here to view the WishForm/Bug Reporting Form
    Cheers... Rick

  • How do you crop outside the image in Adobe Camera Raw?

    I would like to create a crop of a portion of an image in Adobe Camera Raw AND include some area outside that image. Is there a way to do this.

    You can't do that in ACR, but you can if you open it in Photoshop and use the crop tool there.
    Gene
    (If this answers your question, mark it correct.)

  • How do you crop a vertical slide to a constraint size without turning it on it's side? iPhoto 6 automatically rotated the crop box for a vertical slide (picture).

    How do you crop a vertical slide to a constraint size without turning it on it's side? iPhoto 6 automatically rotated the crop box for a vertical slide (picture).

    Select the aspect ratio first.
    Then go back to the same menu and go to the bottom and selectConstrait as portrait.
    OT

  • I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    Vere Clarke
    Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
    So, you can have both on the same computer, but only open one for your work.
    The classical recommendation is to finish a project in the version in which it was created since there
    is no guarantee that a project from an earlier version will open in the later version. Probably will, but
    no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
    take the earlier version project into a later version one, you cannot go back to edit the later version edited
    project in the earlier version program.
    If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
    right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
    (Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
    Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
    Thank you.
    ATR

  • How to create a validation for the project coding mask

    Hi,
    Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
    project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
    mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
    The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
    How can we go about this?

    Hi Jacquiline Bersamin,
    You can use validation with the combination of the level and the coding mask.
    In the validation:
    Pre requisite: WBS level = 1
    Validation: Prps-posid = prps-posid :1-12:
    Message : Error
    If required you can give the parameters for your detail error message.
    Please let me know if this does not work.
    Thanks
    Regards
    Srinivasan Desingh

  • How do you get back to the main screen?

    How do you get back to the main screen? My little movie screen is not in the top right corner as it usually is... ever since it unexpectedly shut down. I can not edit it anymore and the screen is in the middle and the clips and sound are separated underneath. PLEASE HELP THIS PROJECT IS DUE TOMORROW AND I WAS ALMOST DONE

    my limited experience tells me that different magazines work differently.
    try double clicking the home button and then swiping the magazine image up off the top of the screen

  • How do you crop and save a cropped image

    How do you crop and save a cropped image in PS Touch?

    This forum does not deal with any of the Touch applications.
    Try here:
    http://forums.adobe.com/community/photoshop_touch_for_phone
    or here:
    http://forums.adobe.com/community/creative_cloud_touch_apps/adobe_photoshop_touch

  • How do you import final cut pro projects into imovie? (like you create a pr

    How do you import final cut pro projects into imovie?
    (like you create a project in final cut but i want to save it, and import it into imovie..

    Hi -
    Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
    If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
    In FCP:
    Click on the Sequence Icon you want to export in your browser.
    Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
    Close FCP and open iMovie.
    In iMovie:
    Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
    Click Import. Your movie will be imported into iMovie.
    Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
    Hope this helps.
    MtD

  • How do you use emojis in the iPhone 5s

    How do you use emojis in the iPhone 5s

    Tap on Settings, General, Keyboard, Then Keyboards, Add New keyboard, and choose emoji.
    The next time you are in text messaging or email, and the keyboard pops up, select the globe to get to the emoji symbols.

  • I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad

    I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad.

    If you tap and hold down the icon - and the X does not appear on the icon - you will not be able to delete it without totally downloading it. Finish the download and then delete it.

  • How do you remove items from the assets panel that are duplicated?

    How do you remove items from the assets panel that are duplicated?

    If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
    It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

  • How do you remove items from the start up disc

    How do you remove items from the start up disc?

    Freeing Up Space on The Hard Drive
    You can remove data from your Home folder except for the /Home/Library/ folder.
    Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
    Also see Freeing space on your Mac OS X startup disk.

  • How do you remove recipients from the To list?

    Say you want to send an email to multiple recipients. You add a few recipients to the To list but then change your mind about including one of them. How do you remove one from the list? So far the only way I can see is go cancel the whole message and start again.

    Touch the persons name you wish to remove. It will highlight in blue. Then hit the destructive backspace (delete) key on the keyboard.

Maybe you are looking for