How do you deinstall a plug-in?

I am in the middle of designing a book. Everything was working fine till I installed the new plug-in, Power Stroke. Now the entire layout is selected and I can bring up individual pages. I would like to deinstall Power Stroke to see if it is causing the problem but I can't find out how to do it. Any ideas.
thanks a million,
Stan

For the most part. Find it and drag it to the trash (or somewhere else besides one of the Library/Application Support/Aperture/plug-in directories. Your milage may vary, I have not used Power Stroke.
RB

Similar Messages

How do you unblock flash plug-in

How do you unblock flash plug-in?

1. Flash Player download, install and allow it.
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.
Please note.
It is better to start a new thread with your question for prompt help.
Best.

How do you remove malware plug ins from safari

how do you remove malware plug ins from safari browser

Go step by step and test.
1. Download free AdwareMedic by clicking “Download ” from here
    http://www.adwaremedic.com
   Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
   Once scanning and removing the adware is done, quit the app by clicking AdMedic in the menubar
    and selecting “Quit AdwareMedic”.
Safari
2. Safari > Preferences > Extensions
    Turn those off and relaunch Safari again.
3. Safari > Preferences > Privacy > Cookies and other website data:
    Press “Remove all website data” button.
Best.

How do you install "Twixtor" plug in for FCP

Hello,
I think I have installed it properly, I'm not to sure... In FCP i click on "EFFECTS/Video Filters/RE: Vision Plug-in/ and I see
Twixtor 4
TWixtor 4.5 pro
Twixor 4.5 vector
but when i click it nothing happens... shouldn't a box pop in the viwer window unter the "Motion" tab?
I tried ReVision's support but their forum is confusing - so i thought to ask my fellow Mac friends!!!
LEt me know if there is a tutorial on installing it - and how can I tell and where do I look for to see it installed. I downloaded their tutorial but they assume u installed the program properly...
Regards,
Joey

Simon,
Mate you can do some pretty dope stuff with Twixtor it's a good plug in as for Shake I never used it but the check this out
http://www.revisionfx.com/rstwixtortutorials.htm
Downlaod the tutorial that is 215mb and read some of the stuff - it will give you an idea how sophisticated Twixtor is in terms of frames and so forth! I like it Im still messing around with it... the only thing I have an issue with is learning how to synch the audio & the lips movement of my characters so when i put it in slow mo everythings fits well... i hope that made sense...
My best,
Joey

How do you unblock a plug in

every time i try to watch a video on my mac i get a blank screen with a bar stating "blocked plug in" how do i fix this?

After installing Flash Player, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

How Would you add a Plug In?

I want to add this into Edge and I want it to effect nearly all DIV's on the stage like 90% of them
But I have no idea how I add it into edit I can easily get it working in Dreamweavther but in edge its hopless
Heres the JS http://stephband.info/jparallax/
Could anyone walk me threw how to add something like this or direct me to a similar effect/ tutorial for edge?

Looks like you got your question answered here:
http://forums.adobe.com/message/5763832#5763832
Thanks,
-Elaine

How do you add a plug-in, i.e., I need one for a credit union statement or one for somewhere else. I have tried to understand plugs but I don't know.

I have tried to find certain plug-in but I do not under them. I need a plug-in for statement at a credit union for example. Where do I find or get them?

Hi. A plug-in is an additional bit of software that a service may require so that you use a site or view certain content.
When one is needed that you do not already have installed, you should be presented with the option to download the plug-in from the software company, which may take you away from the site you were using. Once installed, re-start Firefox and go back to the page or service you were looking at. You should now be able to use the use the site and see the content that was previously blocked.
Make sure you keep plug-ins up to date. Occasionally check to make sure that you are using the right versions by visiting this [https://www.mozilla.org/en-US/plugincheck/ site].

How can you fix blocked plug ins

i am having a problem with displays i keep getting a message that says blocked plug ins when i try to watch something or play games

If you use Safari try this first
1) open safari
2) click on "Safari" button next to the Apple logo (on the top left side)
3) choose Preferences
4) under security section click on manage website settings....
There you can see what plug-ins you have and change their status "Allow" "blocked" etc

How do you install 3rd party plug-in in Photoshop CC

Our fine customer service/tech support wouldn't help me with my question/problem because 3rd party plug-ins are not an Adobe product.... Silly, isn't it since all I want to know is how do you install "any" plug-ins into Adobe Photoshop CC. Can anyone with any sanity here offer a solution?
Thanks.

It could be complex depending on your OS and user ID permissions. Adobe Photoshop CC Mac version only supports new Mac with Intel 64bit processors, Photoshop CC windows supports both 64 bit systems and 32 bit systems. If you have a 64 bit system both the 32 bit and 64 bit version of Photoshop are installed so windows has both a 32 bit Plug-in Folder and a 64 Bit Plug-in Folder. Prior to CC Photoshop Preference let you add you own Plug-in folder tree to Photoshop Plug-in folder tree. I still install Plug-in that way however I have to add the link manually for adobe removed that option from its Preferences UI in Photoshop CC. I always have more the one versions of Photoshop and all installed versions use the same Plug-in, Actions and Scripts that I add to Photoshop. There is One exception. The Way the Image Processor Pro plug-in script is coded expects it and it default XML file to be installed into Adobe's folder so I made and exception for it. You user ID need to have permission to modify and add files to system folders if you want to install plug-ins into the folders that Adobe created for third party plug-ins to be installed into.
Adobe Photoshop CC installer creates a folder in Photoshop version ...\Plug-ins\... so on my Window 7 64 bit system there are two folders
"C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\" and
"C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Plug-ins\"
All I add to these are the Adobe ScriptListener.8li Plug-in and a link to my Plug-ins folder.

How do you turn UPnP on?

WRT54G V8 How do you turn Universal Plug and Play on from a second laptop? Im trying to open my NAT so I can get onto more game servers, but i cannot find where to change UPnP.

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter... Leave Username blank & in Password use admin in lower case...
Under the Setup Page Click on Administration Tab under the Administration there is sub tab Management wherein you will find the option to enable Upnp but by default the Upnp port is always enable on the router.
Are you playing any game on your computer or you are using any gaming device to play games.
If you are playing the games on any of these devices then you need to open the Ports on your linksys Router for the specific game .

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

How do you choose songs from your ipod instead of from the car dashboard while your ipod is plugged into your car?

How do you choose songs from your ipod instead of from the car dashboard while your ipod is plugged into your car?

It depends on your car stereo. On the JVC we have you can select either "Head Mode" or "iPod Mode" when you're plugged into the USB port. Ipod Mode lets you select the songs from the iPod although the radio still controls the volume. I believe the Alpine I have does the same thing.

Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

How do you get the radio to work ?? - says no radio signal but headphones are plugged in ??

How do you get the radio to work? Is another app or download required? Its a new Ipod nano - 8G, box doesn't say anything about "generation" ?? Appreciate any help
cr8tivsolutions

ok, I see now the plug has to be pushed in really tight until the white is flush with the nano

How do you deinstall a plug-in?

Similar Messages

Maybe you are looking for