How do you determine custom popup size ?

RH9/Snagit 10
I am inserting hyperlinks to graphics in a popup window and trying to get the popups to appear without scroll bars.
the graphics are all roughly the same size (gui screen caps) and will be viewed internally on the same sized laptop screens.
I tried auto-sizing but the resulting window was too small.
I have tried custom popup, but no matter what size i make the image in snagit or when i import into RH, the screen cap does not fit in the popup and there are scroll bars.
is there a formula i can follow to figure out what size i should make the image/popup.
thanks

I found that the best idea is to let Firefox decide that itself.

Similar Messages

How do you determine the optimal size for Mozilla Firefox?

How do you determine the optimal size for cache in Mozilla
Firefox? I am using Firefox 7.0.1 on a 64-bit Windows 7 Ultimate operating system with 3GB RAM and 300 GB hard drive, but I have other computers running Windows XP. If the answer doesn't apply to all current versions of Firefox on all supported Windows operating systems, please explain the differences. Is there a formula for calculating the best cache size?

I found that the best idea is to let Firefox decide that itself.

How do you Determine the Largest Size/Fastest Speed Hard Drive

In general, how do you determine the maximum hard drive size/speed you can upgrade to?

As long as the drive your are considering physically fits as already stated there is no maximum size you can install. Please complete your profile so we know what machine you have.
If your machine is covered by a warranty or AppleCare I would recommend against installing another HD as this may invalidate the warranty. I would recommend in that case using a Firewire 800 external HD instead.
Regards,
Roger

How do you determine resolution for a given print size in LR?

CS3 displays image resolution for a given size. How do you determine what that resolution is in LR for a given print size, so you know whether you should upsize or downsize for optimum print resolution range?

The only way I know of is to work it out. LR and PS make assumptions that are often not ideal (although the differences may not be noticable). Different printers like different resolutions per inch. For example, I once had an Olympus Dye Sub printer that produced awful prints unless the file was exactly 314 ppi. Not 300, 314. 300ppi looked awful. 314 looked amazing. Many Canon inkjets prefer 300ppi files and most of the better Epson's prefer 360ppi. Lambda printer like 400ppi files.
So find out what the printer likes, and in LR enter that number into the printer dialog. I believe the LR engine interpolates the file based on this and the image size on paper you choose to produce a file of the best size.
Having said all that with most modern domestic and prosumer inkjets the difference is pretty negligable.
Gordon

How do you make a Popup LOV search area to be wider?

Hi,
When I select my Popup LOV the search popup appears but it wraps the choices/rows.
How do you make this popup to be the size you desire?
Is it possible or do I need to make a custom popup?
Thanks, BC

Hi,
Thank you.. that example got me thinking about another way I was able to manipulate the HTML in the past but it is not working.
Can anyone see anything wrong with this example?
<script type="text/javascript">
function onLoadProcess(){
var thePopUp = $x('P2_PARENT_SELECT_fieldset');
var theTR = html_CascadeUpTill(thePopUp,'TR');
var theTD = html_CascadeUpTill(thePopUp,'TD');
// alert(theTD.innerHTML); // It shows the code for the whole TD which includes 'width=400,height=450'
var oldSize = 'width=400,height=450';
var newSize = 'width=800,height=450';
theTD.innerHTML = theTD.innerHTML.replace(oldSize,newSize);
//alert(theTR.innerHTML); // It shows the code for the whole TR and has 'width=800,height=450' changed as desired.
</script>
But when I click on the PopUp it is still opening with the 'width=400,height=450'
??? Any input?

How do you determine what shows are in free video on demand?

How do you determine what to include in the free on-demand shows? The Mentalist was always there before but is no longer. This is especially important for shows like the Mentalist and The Good Wife which come on Sunday nights after sports events. Even if I set my DVR to record 60 minutes over it doesn't always catch the entire episode. Would also like to see Person of Interest there. And last but not least, you should have a way for people to access netflix or other services from your service.

If you go to BROWSE then the FREE folder you will find that everything in there is free viewing. If you go elsewhere and try to watch a paid show, you will get a prompt asking you to purchase. It also shows the amount of the movie before purchase.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

In InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to

This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!

Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
From the Transform panel you can set a text box's width and height

How do you change the default size of the print batch size for mail merge in Publisher 2010?

I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

How do you increase the volumne size of a hard drive partition?

how do you increase the volumne size of a hard drive partition? the drive is set up into 3 partitions C, HP_tools and, recovery, C has space and would like to move some to HP_tools that is full. when I run backup I get drive full. I have run backup now to an external drive so that is not an issue.

Hi,
Firstly please don't keep anything in HP_TOOLS except things have been there. You can use Windows systems tool called Disk Management. Please use the following tutorial:
http://www.howtogeek.com/howto/windows-vista/resize-a-partition-for-free-in-windows-vista/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?

How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac? Often I just want to label an item on a map that is in PDF and want to use a simple label rather than a Text Box for labeling, but have yet to find a way to increase the font size beyond 24. Can someone help me with this? - JML

Read this:
https://forums.adobe.com/thread/1468782?sr=stream&ru=2382437

How do you determine the firmware version for a laptop docking station?

How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvin

atenpo wrote:
How do you determine the firmware version of a HP docking station?
Laptop Model: HP 2740p
OS: 64bit Windows 7
Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
Thank you for any assistance.
Alvin
WA995AA#ABA shows to be a hard drive, not a docking station

How do you determine the picture that is shown on iTunes for your podcast?

How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

That is a supported format,
Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
see if the problem is fixed,
If not we may have to reload the device OS to get back the missing option.
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How do you change the ont size

How do you change the font size for one word ?

Basically, you need to wrap the word in a <span> tag, and apply either a class or an inline style to the span. Using a class is better because you can reuse it in other pages, or other parts of the same page. Also, changing the font size in the class will apply the changes to all instances of the class. With an inline style, you have to change each one individually.
To wrap a word in a <span> tag, select the word, then press Ctrl+T (Cmd+T on a Mac) to bring up the Wrap Tag dialog. Type "sp" (without the quotes), and press Enter twice. Then create a class using the CSS Designer. Apply the class to the word by selecting it again, and select the class from the Class drop-down menu in the Property inspector.
To create an inline style, select the word, and click the CSS button on the left of the Property inspector. Select the font size you want from the Size drop-down menu. If the size you want isn't listed, just type the value in the Size field.

HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP

HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %

I don't know if there is a way to set this. Some user's may prefer different sizes of window, depending on their job duties. For example, we have 170 Systems document management integrated with purchasing and payables so users shrink the Oracle window to fill about 60% of the screen while 170 uses the remaining 40% to display the scanned document.

How do you change the font size?

This is a rather simple question.
How do you change the font size in flex builder 2?
In the preferences for flex>editors there is no option to
change any font settings.
i'm sitting quite far away from my LCD and can hardly make
out the text.

Window -> Preferences -> General ->Colors and
fonts

How do you determine custom popup size ?

Similar Messages

Maybe you are looking for