How do you determine memory requirements

Hi there,
Is there a tool or procedure to allow me to determine how much memory my current database is needing to run?
This comes from a resent upgrade to ora8 from ora7 where my database is now severly lacking performance, and I am thinking it is because the machine that it is currently running on does not have enough memory to cater for the new software version of the database, as I have found that ora8 doubles the memory needed from ora7.
Cheers,
CJ

Hi djallan,
which email client did you use to send the eprint job?
Also, were you able to eprint other photo file?
Thank you.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****

Similar Messages

  • How do I determine memory requirements?

    A development team asked me to determine memory requirements for Oracle Portal 10.1.4 implementation. I don't know how to do that, since I am not a software engineer or a systems analyst. The assumptions are: 1.) 6,000 users at peak, with incremental build out over a 24 month period, 2.) about 1,000 users that are actively submitting requests at any one time through their browsers (generating actual load on the servers), 3.) total storage usage for the portal is approximately 5 gigabytes, and 4.) OracleAS 10g architecture (with infrastructure and middle tier servers) would be the proposed HA architecture. 5.) access to the portal would be 18 hours per day, possibly 24 hours a day for a period of 4 months.
    How would I estimate the memory requirements for access and storage for this critical mission portal?

    http://www.oracle.com/technology/products/ias/portal/pdf/oow_10gr2_1337_pepper.pdf

  • After uploading to 10.9.1 how to I determine memory remaining? It was easy previously in activity monitor.

    After uploading to 10.9.1 how to I determine memory remaining? It was easy previously in activity monitor.

    I see what you mean.  I've not been able to discpher that either.  I use a Free Memory app that I can use to free up memory from time to time and when Free Memeory gives me 3.42 free Activity Monitor gives me this:
    However, since Mavericks dymanically handles the memory the only thing I watch are page outs. If I begin getting page outs then I'm pushing my memory limits and using virtual memory.
    OT

  • How do you determine the optimal size for Mozilla Firefox?

    How do you determine the optimal size for cache in Mozilla
    Firefox? I am using Firefox 7.0.1 on a 64-bit Windows 7 Ultimate operating system with 3GB RAM and 300 GB hard drive, but I have other computers running Windows XP. If the answer doesn't apply to all current versions of Firefox on all supported Windows operating systems, please explain the differences. Is there a formula for calculating the best cache size?

    I found that the best idea is to let Firefox decide that itself.

  • How do you determine the firmware version for a laptop docking station?

    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin

    atenpo wrote:
    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin
    WA995AA#ABA shows to be a hard drive, not a docking station

  • How do you determine the picture that is shown on iTunes for your podcast?

    How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

    That is a supported format,
    Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
    see if the problem is fixed,
    If not we may have to reload the device OS to get back the missing option.
    Thanks,
    If you need more info please ask!  If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • How do you determine what shows are in free video on demand?

    How do you determine what to include in the free on-demand shows?  The Mentalist was always there before but is no longer.  This is especially important for shows like the Mentalist and The Good Wife which come on Sunday nights after sports events.  Even if I set my DVR to record 60 minutes over it doesn't always catch the entire episode.  Would also like to see Person of Interest  there.   And last but not least, you should have a way for people to access netflix or other services from your service.  

    If you go to BROWSE then the FREE folder you will find that everything in there is free viewing. If you go elsewhere and try to watch a paid show, you will get a prompt asking you to purchase. It also shows the amount of the movie before purchase.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • How do you determine DSP version in an IOS

    How do you determine DSP version in an IOS. I have a bug that says 'Downgrading DSPware to 4.4.12 or earlier resolves the echo issue.'
    The bug ID is CSCsd54344.

    I have a site with CME with similar static issues, they are running 12.3(8r)T7 with CM 3.2. The DSP version is:
    DSP DSP DSPWARE CURR BOOT PAK TX/RX
    TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
    ==== === == ======== ======= ===== ======= === == ========= == ===== ============
    edsp 001 01 g711ulaw 0.1 IDLE 50/0/1.1
    edsp 002 02 g711ulaw 0.1 IDLE 50/0/1.2
    edsp 003 01 g711ulaw 0.1 busy 50/0/2.1
    edsp 004 02 g711ulaw 0.1 IDLE 50/0/2.2
    edsp 005 01 g711ulaw 0.1 IDLE 50/0/3.1
    edsp 006 02 g711ulaw 0.1 IDLE 50/0/3.2
    edsp 007 01 g711ulaw 0.1 IDLE 50/0/4.1
    edsp 008 02 g729r8 p 0.1 IDLE 50/0/4.2
    edsp 009 01 g711ulaw 0.1 IDLE 50/0/5.1
    edsp 010 02 g729r8 p 0.1 IDLE 50/0/5.2
    ---------------------------FLEX VOICE CARD 0 ------------------------------
    *DSP VOICE CHANNELS*
    DSP DSP DSPWARE CURR BOOT PAK TX/RX
    TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
    ===== === == ======== ======= ===== ======= === == ========= == ==== ============
    *DSP SIGNALING CHANNELS*
    DSP DSP DSPWARE CURR BOOT PAK TX/RX
    TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
    ===== === == ======== ======= ===== ======= === == ========= == ==== ============
    C5510 001 01 {flex} 4.4.705 alloc idle 0 0 0/0/0 02 0 47166/0
    C5510 001 02 {flex} 4.4.705 alloc idle 0 0 0/0/1 06 0 11363/0
    C5510 001 03 {flex} 4.4.705 alloc idle 0 0 0/0/2 10 0 1750/0
    C5510 001 04 {flex} 4.4.705 alloc idle 0 0 0/0/3 14 0 557/0
    C5510 001 05 {flex} 4.4.705 alloc idle 0 0 0/1/0 02 0 934/0
    C5510 001 06 {flex} 4.4.705 alloc idle 0 0 0/1/1 06 0 731/0
    C5510 001 07 {flex} 4.4.705 alloc idle 0 0 0/1/2 10 0 4837/0
    C5510 001 08 {flex} 4.4.705 alloc idle 0 0 0/1/3 14 0 21514/0
    ------------------------END OF FLEX VOICE CARD 0 ----------------------------
    Hmm, whay does it show 0.1 next to the edsp?
    Chris

  • How do you Determine the Largest Size/Fastest Speed Hard Drive

    In general, how do you determine the maximum hard drive size/speed you can upgrade to?

    As long as the drive your are considering physically fits as already stated there is no maximum size you can install. Please complete your profile so we know what machine you have.
    If your machine is covered by a warranty or AppleCare I would recommend against installing another HD as this may invalidate the warranty. I would recommend in that case using a Firewire 800 external HD instead.
    Regards,
    Roger

  • How do you determine resolution for a given print size in LR?

    CS3 displays image resolution for a given size. How do you determine what that resolution is in LR for a given print size, so you know whether you should upsize or downsize for optimum print resolution range?

    The only way I know of is to work it out. LR and PS make assumptions that are often not ideal (although the differences may not be noticable). Different printers like different resolutions per inch. For example, I once had an Olympus Dye Sub printer that produced awful prints unless the file was exactly 314 ppi. Not 300, 314. 300ppi looked awful. 314 looked amazing. Many Canon inkjets prefer 300ppi files and most of the better Epson's prefer 360ppi. Lambda printer like 400ppi files.
    So find out what the printer likes, and in LR enter that number into the printer dialog. I believe the LR engine interpolates the file based on this and the image size on paper you choose to produce a file of the best size.
    Having said all that with most modern domestic and prosumer inkjets the difference is pretty negligable.
    Gordon

  • How do you determine which programs or processes run following a reboot?

    How do you determine which programs or processes run following a reboot?  Also when you reboot Mac tries to reopen anything running before the reboot.  Is there any way to turn off that functionality?

    10.7 Lion
    dadpope wrote:
    How do you determine which programs or processes run following a reboot?
    Login items
    Follow the  instructions in this article.
    http://support.apple.com/kb/PH4333
    Also when you reboot Mac tries to reopen anything running before the reboot.  Is there any way to turn off that functionality?
    System Preferences > General
    Section: Number of recent items
    Uncheck the box for "Restore windows when quitting and re-opening apps".

  • How do you determine remaining capacity on ipod shuffle

    How can you determine remaining capacity on ipod shuffle?

    I tried this and did not see anything in iTunes. I'm not the smartest guy on the block when it deals with computers. Hey i'm 73 years young!! Thanks for your help anyway.

  • How do you determine transportation planning point

    Hi Gurus,
    Badly need your help.  How do you determine transportation planning point?
    Thanks,
    Paul

    Dear John
    It is based on routes and route schedules are determined based on the following conditions:-
    => Shipping point
         Where are the goods coming from?
    => Ship-to party and unloading point
         Where are the goods going to?
    => Shipping condition
         How are the goods being shipped?
    => Transportation group
         Which goods are shipped?
         --> For example, which type of goods?
    => Calendar week / year
          When are the goods to be shipped?
    If you do not explicitly enter the week and the year, the entry applies for each calendar week. If you enter a week and a year, the route schedule only applies for this week.
    You can only use route schedules if you have maintained the working times and therefore at least one of the following times in minutes:
           -> Transportation planning time
           -> Pick/pack time
           -> Loading time
           -> Transit time
    A route schedule can leave the warehouse exactly once in a week. If a route schedule runs several times, either on several days or several times a day, it must be copied to another route schedule.
    Thanks
    G. Lakshmipathi

  • HT201209 How do you determine the funds left on an itunes card?

    How do you determine the funds left on an itunes card?

    If it hasn't been redeemed, the value is the face value.
    If it was redeemed, the value on the card is zero. 
    When you redeem an iTunes gift card, the full value is immediately transferred as a credit to the account you are using when you do the redemption.  After that point, the card is worthless.

  • How the system determines the Requirement type  for one sales order

    Hi,
    SAP-SD Gurus,
    Please tell me how the system determines the Requirement type  for one sales order?
    Thanks & Regards,
    Sreenivas.P

    Hi,
    System follows some search criterial to determine the requirement type
    1. First, an attempt is made to find a requirements type using the strategy group in the material master.
    2. If the strategy group has not been maintained, the system will determine it using the MRP group.
    3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
    4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
    5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
    6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
    Please check the path
    SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
    Hope it will clarify
    regards,
    santosh

Maybe you are looking for

  • Cannot Align text in cell

    Greetings, I am having issues when trying to format my spreadsheet.  First of all, I have "Wrap Text in Cell" option turned on.  So when I have text that can fit into the cell, its fine.  But when I have long text in the cell, it wraps the text in th

  • Asign sRGB profile on import from memory card?

    Can I have the Mac automatically assign the sRGB profile to the images I import into iPhoto. They all come in as Camera RGB now. Typically I take my memory card out of the camera and plug it into a memory card reader and then automatically import int

  • Classical music

    What happened to your classical music access on iTunes? I could not find any way to get to it today. Philip Shelton [email protected]

  • Create a new store front (istore)

    We have a requirement to create a new store front. Similar to previous one. We have two types of OU(Operating unit) say X,Y We have to create a new store front which has all the features of the previously created store front. We also need to attach a

  • Investment project / customer project

    Hi Investment project having only WBS element, it does not have ACTIVITIES, but Customer project u have both WBS & ACTIVITIES.  wht is the reason behind Investment project does not having ACTIVITIES. There may be some reason behind this logic, can u