How do you disable compression effect with audio. Envy dv4

How do I disable the compression effect on the audio sound with the envy dv4.

it doenst work..pls find a solution because this is anoying

Similar Messages

How do you disable iPod Auto Update with iTunes?

How do you disable iPod Auto Update with iTunes? I know there is a key press combo that will do it but I forget which keys. Anyone?
Intel Piii Windows XP Pro

Keep iTunes from automatically updating your iPod
Another Easier Alternative:
While connecting the iPod to the computer, hold down the Shift + Ctrl keys in Windows (CMD + Option keys on a Mac). This will stop the iPod from auto-syncing with iTunes. The iPod will then appear in the iTunes source list. Wait until you are sure the iPod has mounted, and that it will not auto-sync and then you can release the keys. This action may take between 3 and 25 seconds depending on your computer.
You can then ‘right-click‘ on the iPod icon in iTunes’ source column and select iPod Options, then check the box that says “Manually manage songs and playlists”. You can now manage your library without losing any songs on the iPod.
Note: If connecting to a different computer than the ‘iPod’s Home Computer’, iTunes will ask you if you want to update your iPod and give you an opportunity to opt out. This will not happen if you connect to the ‘Home’ computer – iTunes will auto-sync without warning!. Best to know the difference.

How do you disable a restrictions code with out resetting your iPhone and the password

How do you disable your restrictions code without resetting your phone and without putting in the code?

No, there isn't. But you can restore your stuff if you have a current backup to restore. Otherwise, you are S.O.L.

How do you disable - hotsync manager window's fade out on close?

For the newer version of Palm Desktop and Hotsync Manager, how do you make the hotsync manager window stop fading out when closed or "done".
It stops me from being able to access ANYTHING until the fade is completed, and that is a complete waste of my time, also when I have much more important things going on (alarms/alerts) that can't be silenced during the fade.
And ... how do you disable the splash screen startup for the Palm Desktop, and how do you get the palm desktop to conform to standard windows start practices, so that when you open the program it comes up on the screen at the same windowed size I closed it at?
Thanks!!
Post relates to: Centro (Sprint)

Thank you ... however it was already set for "normal window". I deleted the icon and recreated and that seemed to fix it though, not sure why.
As for the splash ... its a waste of time ... the application loads faster than "they" would expect so all it does is extra advertizing for Access without having a purpose. And again, its not just a second or so, its 3 to 5 seconds depending on what else I'm doing.. and if I'm reading an email while double clicking the icon to have it start on my second monitor.. the spash covers my email till the program's running.
The worse delay is the fade. You already admit that it can vary depending on a number of things.. well that programmer may have thought it were very cool on a quad core intel @ 3 GHz .... try it on a 1 G p3, with an older video card. Or try it on an older laptop .... the delay is 6 to 10 seconds while it fades it self to the nethers, it certainly didn't "CLOSE" when I told it to.. it took its dear sweet time.
The programmer probably thought "hey this is really cool mahn.. watch it fade away..." by the third time of being into or out of the settings that re-triggers the closing fade, I was ready to kill that programmer. Make him suffer for the stupidity of his vision. Its one thing to make it "cool" and give people the option to live with that plain jane every day FASTER response... and quite the other to force people to relive your "cool" idea every f**king day, every time they go into settings, or need to see the log for what failed on backup.. etc.
Ever go upto a windows XP pc when someone says it seems slow and *de-select* the "FADE" option for their menus?? (Display Properties -> Appearance -> Effects -> deselect "use the following transition") I have ... and its amazing how perception changes because the menus are there NOW, not taking their time to pull off some grandious entrance ... the first time it may have been cool.. but by the 500 th time you've been into your start menu a year into the game.. that slow fade crap is working on your every nerve.
Poor impulse control would have had me killing the programmer that put that fade in there.. now I just want to put him in for an hour or two of waterboarding.
It was bad programming to force some idiots idea of a "cool" view on people, and the programmer should be shot down for it. It shouldn't be... and it wasn't there before, so some mornon actually went out of their way to put something in because the program just wasn't "cool" enough for them.. and then they decided to F the rest of us by making it so we couldn't DEselect that slice of programmers heaven.
It may sound like I'm blowing things out of proportion... but really, it was fine the way it was, now they've gone and F'd it up. Moves for the better get little publicity, you have to live with the knowledge no one is bitching, but when you screw something up ... you need to fix it and need to hear how badly your lack of vision made things for others.
and.. if they wont' fix it.. its coming off the pc.. I'll go back to the old "uncool" version.
Post relates to: Centro (Sprint)

How do you disable voice announcements on the Gusto 3 ?

How do you disable Voice Announcements on the Gusto 3 >

Thanks for reaching out to us, tobrien459! May I ask what readouts you are getting in order for me to make sure I provide you with the most accurate information?
I'm thinking you are looking for this:
From the Home screen, press the Left Soft Key
Menu > Settings > Accessibility > Easy Set-up.
2. Follow the screen prompts to choose settings for
Full Readout, Menu Readout, Digit Dial Readout,
Alert Readout, TXT Message Readout, Browser
Readout, and Flip Open & Talk
Let me know if this is what you need.
TamaraH_VZW
Follow us on Twitter @VZWSupport

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

How do you purge/compress/shrink the iPhoto11 folder/file size?

How do you purge/compress/shrink the iPhoto11 folder/file size?
I have been using iPhoto since iLife'05 and have always upgraded with each iteration of iLife. Without exception, I had just recently upgraded to iPhoto'11 when iLife'11 came out. Because I have used iPhoto to store all my photos and videos taken over the last 5 years or so, my iPhoto folder/file has become bigger and bigger over time and so I moved it to an external hard-drive. My main iPhoto'11 folder/file has 14,367 photos, 995 videos and is indicated to be 83 GB by iPhoto'11. But "Get Info" in Finder reports a whopping 130 GB.
I started to think that this is getting a little crazy and I had wanted to better manage my photo collection, so I decided to "divide and conquer" this gigantic iPhoto'11 folder/file into several smaller, more manageable sized ones. So I made a duplicate copy of this gigantic iPhoto'11 folder/file onto another external hard-drive, fire-up iPhoto'11 again to delete away almost 80% of the photos and 90% of the videos. Now, my "slimmed-down" iPhoto folder/file has 3,000 photos, 75 videos and is indicated to be 6.8 GB by iPhoto'11. But despite the new "slimmed-down" status, the "Get Info" in Finder reports a still very huge 44 GB. Where did all those bulk come from? I have emptied both the iPhoto'11 Trash Can and Mac OS X Trash Can and these steps did not seemed to change anything at all.
Therefore, I wanted to see what the "Get Info" in Finder will report if I were to delete 99.99% of the photos and video to leave just one (1) photo in iPhoto'11? Guess what is the result? My "One Photo experimental" iPhoto folder/file has 1 photo, 0 videos and is indicated to be 2 MB by iPhoto'11 yet the "Get Info" in Finder reports a mysterious 36.3 GB. There must be something hiding inside!
Help! What can I do?

I went on to try trashing away some of the folders and files inside and found that I could actually do it quite neatly if I go by the year which the photos are taken. After a lot of trial and error working on duplicate copy of my iPhoto '11 library, I am able to do away with all the clutter within the library and still open it normally.
Now my 44GB obese iPhoto'11 library has been slimmed down to just a little over 7 GB (5 GB as reported by iPhoto'11) and I am just comfortable dealing with 2 GB of "don't-know-what-info" of clutter within the library.
Remember my "One Photo Experimental" iPhoto'11 library that was 36.3 GB? I managed to bring it down to the realistic 22 MB size. This size is still double that of a brand new iPhoto'11 library I created to import 1 photo. However, it sure beat having 36.3 GB of clutter.
So, now what I am gonna do is to "divide and conquer" the duplicate copies of my iPhoto'11 library into smaller sized ones according to their year. But I think I'll still keep the original bloated, gigantic 130 GB intact and continue to feed it with photos and videos until maybe it becomes 1 TB! Yikes!
Anyway, million thanks for your tip and I really appreciate it! Have a Happy holidays!

How can I disable the advancedAntiAliasing with fontswf in sdk

Hi,
in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
but here is a problem
I cannt disable the advancedAntiAliasing with fontswf ?
because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
now i just set the sharpness and thickness to workaround in used asc2.0
but i think that is not great.
so how can I disable the advancedAntiAliasing with fontswf or any other solution?
thanks
hbb

Hello -
That setting is not fully supported. You can explicitly call it like this:
./compc -include-sources ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
So, that is the compiler option that you want to use in order to disable it. The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well

Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
Thanks
Jeff Pulera
Safe Harbor Computers

HT204370 If the movie says Audio is in English and Spanish, how do you listen to the Spanish audio?

If the movie says Audio is in English and Spanish, how do you listen to the Spanish audio?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

How do you disable "FILE IN USE" pop-ups so you can actually edit and delete PDFs?!

Can someone please help me with this query:
How do you disable "FILE IN USE" pop-ups so you can actually edit and delete PDFs?!
I continue to have a pop saying that either the file in open somewhere in the serve- which it is not- and I cannot delete a particular pdf or edit it.
It's incredibly frustrating and in the end I end up having four files with different names because it won't let me edit the original file!!!!

Hi Amila1,
Are the pdfs stored on a network location?
If so is the Preview pane turned ON?
Please check the doc: http://kb.globalscape.com/KnowledgebaseArticle10862.aspx
Regards,
Rave

How do you disable the feature to 'keep iMessage conversations running between two devices'?

I have 2 apple devices- an iPhone 4 and an iPad 2. When I set my iPad up and set iMessage up set it offered me the option to keep iMessage conversations running between the two devices, and i pressed yes. I now cannot stand this feature because every time I recieve an iMessage, I get two alerts, one on each device. How do you disable it?

Hi DeltaNomad,
Welcome to the Support Communities!
You can disable the Substitutions feature completely, or add words you frequently use to the substitutions list. See this information from the Pages User Guide:
Replace text automatically - Pages Help for Mac
http://help.apple.com/pages/mac/5.1/#/tanca15d8a79
When Text Replacement is turned on for the document, a checkmark appears next to Text Replacement in the Substitutions menu. You can deselect Text Replacement to turn it off, but existing text won’t change unless you select the text, and then follow the steps above.
Choose Edit > Substitutions > Show Substitutions (from the Edit menu at the top of your computer screen).
In the Substitutions window, select the Text Replacement checkbox, then click Text Preferences.
Click Text, click the plus sign, then type the text you want to replace (such as “teh”) in the Replace column.
Type the word you want to replace it with (such as “the”) in the With column.
Close the window when you’re done editing substitutions.
Click a button to replace all occurrences of the replacement text in the document, or only in the selected text.
Cheers,
- Judy

How do you disable the "Touch to return to call" banner on the top of the screen?

How do you disable the "Touch to return to call" banner on an iPhone 4s and it is factory unlocked?
Thank you.

If your trying to just simply have it not show while navigating the OS during a call, then there is no option to disable it. If it's a problem where it's continuing to show after you disconnect a call it could be a fault in code that fails to run the script to terminate the banner need upon disconnect. I would restore the phone using itunes as a first troubleshooting step. Another avenue might be an issue with the phone failing to recognize the end of call signal from the carrier. In which case I would have the SIM card changed. Easy thing to do at your local carrier store.

How do you disable pinch to close presentation in Keynote

How do you disable pinch to close presentation in Keynote?
I am using iPad 2's as kiosks at my work and we are using Keynote to display the content. Is there a way to disable pinch to close?

Try a search for Keynote, Kiosk - you may find some items there.
My guess is that Apple has a few people around that know how to program their in-store iPads to defeat fumbling fingers. I doubt they are willing to share.
To go one step further with the plexiglass cover idea though, if you have interactions needed from customers then consider making all interactions in the same location on the slide - say, the right hand margin, one on top and one bottom - that way you could put finger holes in the plexiglass cover where the touch points are and avoid potential pinches. You would have to rearrange your slide response areas to match, but it is one way (fairly cheap) to get going if you can't find anything in the apps store or on-line. Try it with a mockup piece of cardboard or plastic sheet and see if it might work for you.
Good Luck.

How do you disable compression effect with audio. Envy dv4

Similar Messages

Maybe you are looking for