How do you disable iTunes helper?

The iTunesHelper.exe application seems to run constantly from startup (according to task manager), even when I've never even opened iTunes, how do you disable this?
I'm trying to make my computer run a little more effeciently. Thanks.

Open msconfig, go to startup tab and uncheck the checkbox for helper.
Is it causing problems? I complain about iTunes resources more than the services Apple wants running.
Message was edited by: camoracer

Similar Messages

  • How do you disable iTunes?

    I want to plug my ipod into my computer and not have itunes open itself, how do I do this? If impossible, how do I temporarily disable iTunes?

    Hi John,
    To prevent iTunes from opening automatically when you connect iPod to your
    computer:
    1 In iTunes, select iPod in the source list and click the Summary tab.
    2 In the Options section, deselect “Open iTunes when this iPod is connected.”
    3 Click Apply.
    or as you connect iPod touch to your computer, press and hold Command-Option (on a Mac) or Shift-Control (on a PC) until you see iPod touch appear in the sidebar.
    there is also an option in iTunes preferences to prevent ipod syncing automatically.
    Hope this helps.

  • How do you install itunes helper ?

    what is the itunes helper ? how do i install it correctly ?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • TS1702 how do you stop itunes from downloading apps over and over again and again like for ever it wont stop  help.

    how do you stop itunes from downloading apps over and over again and again like for ever it wont stop  help.
    i tryed everything i  can in the setting and so on , i even clicked on the downloads arrow to pause it and delete them but like i said it will now stop.
    theres apps i just dont want. theres a list of them but theres not a place were i can get rid of them. it also says some stuff about icloud yeah right like i have ios 5 or 7 ha . pod touch 2 is what i have lol . plz help thanks.

    to the right by search library theres an arrow there click on it : it will show you what it is downloading , from there you can pause and select all and delete them but still will continue to download them if you tell itunes to check for downloads. that download engien is crazy i tell yeah.
    no matter what we do it will still download them trust me i tryed everything and i also went to icloud to see if it was there but to what i see is that there is no apps there this is some crazy itune program that needs to remade.

  • How do you disable "Connect to iTunes to Enable Push Notification" Message when opeing an app? Thie message is compeleyely annoying and theres is no way to cancel it. You have to clcik on "OK" to use the app.

    How do you disable the "Connect to iTunes to Enable Push Notifications" prompt when opening apps on an iPad (OS7)? The message is completely annoying and there is no way to cancel it. You must click on "OK" to use the app. I have already disabled notifications on those apps in the Notification Center.

    The best way to do this is to leave all files unchanged, but render the file containing that horrendous bird noise unreadable to the system. Open a terminal window, and paste this command:
    sudo chmod 000 /System/Library/Frameworks/Social.framework/XPCServices/com.apple.twitter.xpc/C ontents/Resources/TwitterSent.caf
    That's it. Your Tweets should hereinafter be silent unless you change TwitterSent.caf's permissions again.

  • How do you disable iPod Auto Update with iTunes?

    How do you disable iPod Auto Update with iTunes? I know there is a key press combo that will do it but I forget which keys. Anyone?
    Intel Piii   Windows XP Pro  

    Keep iTunes from automatically updating your iPod
    Another Easier Alternative:
    While connecting the iPod to the computer, hold down the Shift + Ctrl keys in Windows (CMD + Option keys on a Mac). This will stop the iPod from auto-syncing with iTunes. The iPod will then appear in the iTunes source list. Wait until you are sure the iPod has mounted, and that it will not auto-sync and then you can release the keys. This action may take between 3 and 25 seconds depending on your computer.
    You can then ‘right-click‘ on the iPod icon in iTunes’ source column and select iPod Options, then check the box that says “Manually manage songs and playlists”. You can now manage your library without losing any songs on the iPod.
    Note: If connecting to a different computer than the ‘iPod’s Home Computer’, iTunes will ask you if you want to update your iPod and give you an opportunity to opt out. This will not happen if you connect to the ‘Home’ computer – iTunes will auto-sync without warning!. Best to know the difference.

  • How do you get Itunes to go the free radio station list, I'm not talkiing about the one that lists the price next to the song that's playing, I'm talking about the one that lists about 50 diffrent genes.

    How do you get Itunes to go to the free radio station list, I'm not talking about the one that lists the price next to the song that's playing, I'm talking about the one that gives you 50 diffrent genes to select from?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    But answering quickly, if you mean the streaming stations, click the Internet item:
    If you don't see that item, checkmark "Internet Radio" in the General preferences in iTunes.
    Regards.

  • How do you fix itune error 7(windows error 1114)

    how do you fix itune error 7 (windows error 1114)

    Hey snowmanlahaie,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so arearticularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Cheers,
    Delgadoh

  • How do you disable "FILE IN USE" pop-ups so you can actually edit and delete PDFs?!

    Can someone please help me with this query:
    How do you disable "FILE IN USE" pop-ups so you can actually edit and delete PDFs?!
    I continue to have a pop saying that either the file in open somewhere in the serve- which it is not- and I cannot delete a particular pdf or edit it.
    It's incredibly frustrating and in the end I end up having four files with different names because it won't let me edit the original file!!!!

    Hi Amila1,
    Are the pdfs stored on a network location?
    If so is the Preview pane turned ON?
    Please check the doc: http://kb.globalscape.com/KnowledgebaseArticle10862.aspx
    Regards,
    Rave

  • How do you disable "digital optical output" so the red light in headphone jack goes off and I can use the internal speakers?

    HI,
    I have a red light in my headphone jack and I see "correct responses" listed as "when digital output is enabled speakers are disabled." That's all well and good but doens't really help. HOW do you disable the "digital output," get the red light to turn off and be able to hear through the speakers? What's the SOLUTION to the problem. Sorry, just a bit frustrated. Any help is greatly appreciated.
    Best,
    dpeast12

    Allegedly this can occur if there is a contaminant in the headphone jack that makes the computer believe there is an optical connection there, so it shuts off the internal speakers.
    Try inserting and removing a headphone plug repeatedly. This ought to dislodge the junk, and seems to have fixed the problem for others. Hope it helps!

  • How do you disable the feature to 'keep iMessage conversations running between two devices'?

    I have 2 apple devices- an iPhone 4 and an iPad 2. When I set my iPad up and set iMessage up set it offered me the option to keep iMessage conversations running between the two devices, and i pressed yes. I now cannot stand this feature because every time I recieve an iMessage, I get two alerts, one on each device. How do you disable it?

    Hi DeltaNomad,
    Welcome to the Support Communities!
    You can disable the Substitutions feature completely, or add words you frequently use to the substitutions list.  See this information from the Pages User Guide:
    Replace text automatically - Pages Help for Mac
    http://help.apple.com/pages/mac/5.1/#/tanca15d8a79
    When Text Replacement is turned on for the document, a checkmark appears next to Text Replacement in the Substitutions menu. You can deselect Text Replacement to turn it off, but existing text won’t change unless you select the text, and then follow the steps above.
    Choose Edit > Substitutions > Show Substitutions (from the Edit menu at the top of your computer screen).
    In the Substitutions window, select the Text Replacement checkbox, then click Text Preferences.
    Click Text, click the plus sign, then type the text you want to replace (such as “teh”) in the Replace column.
    Type the word you want to replace it with (such as “the”) in the With column.
    Close the window when you’re done editing substitutions.
    Click a button to replace all occurrences of the replacement text in the document, or only in the selected text.
    Cheers,
    - Judy

  • How do you disable the "Touch to return to call" banner on the top of the screen?

    How do you disable the "Touch to return to call" banner on an iPhone 4s and it is factory unlocked?
    Thank you.

    If your trying to just simply have it not show while navigating the OS during a call, then there is no option to disable it. If it's a problem where it's continuing to show after you disconnect a call it could be a fault in code that fails to run the script to terminate the banner need upon disconnect. I would restore the phone using itunes as a first troubleshooting step. Another avenue might be an issue with the phone failing to recognize the end of call signal from the carrier. In which case I would have the SIM card changed. Easy thing to do at your local carrier store.

  • How do you disable your anti virus to update to 5.1?

    How do you disable your anti virus to update to 5.1? And is it on your computer or iPad?

    The iPad doesn't have antivirus, so it won't be on there. If you are downloading the update via your computer's iTunes then how you disable you antivirus and firewall software will depend upon what the software is - Kaspersky, Norton, McAfee, ... ? If you know whose it is then somebody on here might have the same software and be able to tell you.

  • How can you disable receiving Broadcast Messages?

    How can you disable receiving Broadcast Messages 
    Without deleting your Contacts ?

    I don't have access to my phone at the moment so I'm going on memory alone.  On your homescreen follow Options>Advanced System Settings>Cell Broadcasting, or maybe you'll see Options>Device>Advanced System Settings>Cell Broadcasting.  I'm sorry I can't be more specific without a phone in front of me.
    Let us know if that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • How do you disable iPod touch 8gb 4th generation 6.1.3, How do you disable iPod touch 8gb 4th generation 6.1.3

    How do you disable iPod touch 8gb 4th generation 6.1.3 for 21,000,000 minutes

    To undisable the iPod
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • T code f-02

    Hi friends, In the tcode F-02 if we give future document date it will give information message ---check-document date is in the future.How to change it into error message? This is urgent... Plz help.

  • Call BDC that stop's at dynpro screen from web dynpro

    hey , i have a bdc that stop's at dynpro screen to show some data . i created a WDP application and wrapped it in a transaction so the users can run it via SAP and not from sap portal . is it possible to run the BDC from WDP and show this screen ? th

  • After logout + session is not terminated

    Hi everyone. I have been using the tutorial Tutorial for Java EE Developers (10.1.3.1.0) and has used the class SRLogout.java to logout the user. But the problem is when we click on the back button of the browser. The user can access the page even if

  • ORA-01422: Exact fetch returns more than requested no of rows

    Hi experts. There is on requeter and one Supervisor to approve the request. But if see the errors in Workflow Administration Web Applications,see the above error message. How come this error message, if i have one approver in the notication process.T

  • Is it a virus threat? Or just a compatiblity problem?

    I used to playing a webpage game based on flash. I recently upgraded the flashplayer to 10.1.82.76 and encounter a loading problem. The notifier showed: Error #2044: Unhandled securityError:. text=Error #2048: Security sandbox violation: http://game3