How do you disable notification on an iPad Air 2 locked screen?, how do you disable "notifications" on an iPad Air 2 locked screen?

How do you disable "notifications" on an IPad Air 2 locked screen?

Go to settings, notifications
the he list has included apps and excluded.
tap on each app you want changed and turn off the lock screen option.

Similar Messages

  • How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc? Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom. All other screen functions work normally.

    How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc?
    Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom.
    All other screen functions work normally.

    Settings/Control Center. There are two options which are pretty self-explanitory...one enables/disables access on the Lock Screen and one enables/disables access within apps/games.

  • My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?

    My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?

    If you do not have the password, you can only do a restore-resetting the iPad to factory condition.

  • I tried to log on my new ipad and forgot the password combination.  Due to several tries the ipad is locked up.  I remembered the password but my ipad is still disabled.  How do I get it going again?

    I tried to log on my new ipad and forgot the password combination.  Due to several tries the ipad is locked up.  I remembered the password but my ipad is still disabled.  How do I get it going again?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    iOS: Wrong passcode results in red disabled screen
    This will tell you how to restore
    iTunes: Backing up, updating or restoring iOS software
    If you cannot restore that way, you may have to use recovery mode
    iPad: Unable to update or restore

  • How do I get the weather on my iPad running iOS7 to show celsius in the Notification Center?

    I just upgraded my iPad to iOS 7 and noticed in the notification center, the weather is in farenheit.  I prefer celsius.  Any thoughts on how I can change that?

    Demo wrote:
    hangtenn wrote:
    yes this is much easier to do on the iphone as it's just a switch in the pre-existing weather app, while leaving the region format unchanged.  unfortunately, the ipad has no such pre-existing app, and the notification center will not take it's cue from any weather app you download. 
    The reason that I explained the solution the way that I did, is because there is NO weather app on the iPad and the only way that I can see to change this would be to change the region format.
    Besides, I based my answer on the assumption that the region format was set incorrectly on Brian's iPad.
    sorry for the confusion, that response was meant to defend your solution to iamcem (i should have quoted their response when i posted mine).  they were saying that changing the region was a bad idea, and that the change should be made in the default weather app.  i was explaining to them that although their's was a simple solution, it only worked on the iphone.  i was trying to explain why their solution wouldn't work on the ipad, and so why your solution was the best available.

  • My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

    My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

    Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • I have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

    i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    iOS: Wrong passcode results in red disabled screen
    This will tell you how to restore
    iTunes: Backing up, updating or restoring iOS software
    If you cannot restore that way, you may have to use recovery mode
    iPad: Unable to update or restore

  • I am a royal iPad was stolen .. how can disable the device?

    I am a royal iPad was stolen .. how can disable the device?

    You might find this page useful if you enable the feature and want to use it to find your device.
    http://support.apple.com/kb/PH2696
    Useful for the poster's future devices. It cannot be enabled on a device that has been stolen.

  • HT1212 ipad disabled, but I can't connect t o iTunes because it's locked. How can I entere my code to unlock my iPad when the it's disabled.

    when I try to connect my ipad to my itune account it does not allow me to do that. I've followed the instruction , but keep getting the same result " ITunes could not connect to the iPad because it's locked with a passcode. I have never connected this iPad to This computer.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Mute notification on screen - how disable it?

    Mute notification on screen - how disable it? It is very irritating. TV *933 series.

    I don't believe it can be disabled, but you may want to contact customer support at (800) 631-3811.
    - Peter

  • I am trying to enable switch control on my iPad air but it is in disable state it's not allowing me to enable could you please provide me the solution

    I Want to setup switch control on my iPad i am trying the same but it is disabled please help me out how do I enable switch control.

    Try to narrow this down further, do you use restrictions at all? I don't think that there is anything in the restrictions setting that would disable Switch Control, but I don't use restrictions. From my limited experince with the restrictions settings, the only thing that I can think of that might be making the setting greyed out would be Settings>General>Restrictions>Allow Changes>Accounts. But I really don't think that has anything to do with this.
    SInce this is a brand new iPad, try basics. Reset the iPad first. If that doesn't work, reset all settings, you will not lose any data in eituer case, but if you reset all settings, you will have to re-enter all device settings again. Resetting all settings will also restart the iPad so don't be alarmed when that happens.
    First, try resetting the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that didn't work, try this. Reset all settings. Settings>General>Reset>Reset all Settings.

  • How do I remove them from my itunes account as authorized accounts for my new macbook iphone and ipad to use? I CANNOT access them can i call you?  also if i have an old itunes account on another email

    help 4 of my authorized computers crashed or are gone how do I remove them from my itunes account as authorized accounts for my new macbook iphone and ipad to use? I CANNOT access them can i call you?
    also if i have an old itunes account on another email can i transfer those songs i still have access to both emails?
    thank you

    De-authorise all, then authorise the one you still have.

  • This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

    This is a new notification coming up with iTunes, why and how do I fix it?
    The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
    Max

    Hey xxCreepyFiaxx,
    First, I would try the following suggested steps for when you don't see content in iTunes after updating:
    Quit iTunes.
    Download and install the latest version of iTunes.
    Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
    Mac OS X
    /Users/username/Music/iTunes/
    Microsoft Windows Windows XP and Windows 2000
    \Documents and Settings\username\My Documents\My Music\iTunes\
    Microsoft Windows Windows Vista and Windows 7
    \Users\username\Music\iTunes\
    Drag the iTunes Library file from the above location to the Desktop.
    Open the Previous iTunes Libraries folder in the iTunes folder.
    Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
    Drag this file to the iTunes folder (the enclosing folder).
    Rename this file to iTunes Library.
    Open iTunes.
    You should now see your missing content in iTunes.
    via: No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    If that doesn't resolve the issue, then I'd go through the steps in here:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Have a good one,
    Delgadoh

  • When I placed a video from my camera roll on my ipad to keynote on my ipad I lost sound how do you make sound work?

    When i placed a video from my camera roll on my ipad to my keynote presentation on my ipad I lost sound how do I get sound?

    Not sure of the answer, but does the sound disappear when it was added to the photo roll, or when you try to import it into Keynote?

  • Hello  How do I get out of this problem (Activate ipad) with this problem, I can not use my ipad as before, I hope that you will find the solution to me

    How do I get out of this problem (Activate ipad) ?

    What is happening when you try to activate? Describe the problem with some detail please.

  • TS2529 The error msg "The iPad "User's iPad" cannot be synced.  You do not have enough access privileges for this operation." appears when I connect my ipad to itunes.  How to resolve?

    The error msg "The iPad "User's iPad" cannot be synced.  You do not have enough access privileges for this operation." appears when I connect my ipad to itunes.  How to resolve?

    If you're running Windows, close iTunes, right-click on the iTunes icon and choose Run as Administrator, then try syncing again.

Maybe you are looking for