How do you disable promt "Click to run an ActiveX control on page"

Hello,
How do you disable the prompt :
"Click to run an ActiveX control on this Page"
I started getting this all of a sudden when looking at Quicktime VR Movies.
I am using Internet Explorer 6.0

Actually I found this:
http://discussions.apple.com/thread.jspa?messageID=1916644&#1916644
and I uninstalled my update and now everything is fine.

Similar Messages

  • How do you disable ctrl-click?

    How do you prevent ctrl-click from opening a context-specific menu? It's seriously getting in the way of Cognos which requires ctrl-click for multiple selection.
    It would seem that Cognos was written without Macs in mind but there is a lot of supposedly platform-independent software that makes that uses ctrl-click, not cmd-click, for multiple selection, so I'm hoping that others have long since found a solution that presently eludes me.

    Open System Preferences/Keyboard, click the Modifier Keys button
    Go to the action for the Control key and set it to No Action then click OK then close the panel

  • How do you disable the feature to 'keep iMessage conversations running between two devices'?

    I have 2 apple devices- an iPhone 4 and an iPad 2. When I set my iPad up and set iMessage up set it offered me the option to keep iMessage conversations running between the two devices, and i pressed yes. I now cannot stand this feature because every time I recieve an iMessage, I get two alerts, one on each device. How do you disable it?

    Hi DeltaNomad,
    Welcome to the Support Communities!
    You can disable the Substitutions feature completely, or add words you frequently use to the substitutions list.  See this information from the Pages User Guide:
    Replace text automatically - Pages Help for Mac
    http://help.apple.com/pages/mac/5.1/#/tanca15d8a79
    When Text Replacement is turned on for the document, a checkmark appears next to Text Replacement in the Substitutions menu. You can deselect Text Replacement to turn it off, but existing text won’t change unless you select the text, and then follow the steps above.
    Choose Edit > Substitutions > Show Substitutions (from the Edit menu at the top of your computer screen).
    In the Substitutions window, select the Text Replacement checkbox, then click Text Preferences.
    Click Text, click the plus sign, then type the text you want to replace (such as “teh”) in the Replace column.
    Type the word you want to replace it with (such as “the”) in the With column.
    Close the window when you’re done editing substitutions.
    Click a button to replace all occurrences of the replacement text in the document, or only in the selected text.
    Cheers,
    - Judy

  • How do you disable - hotsync manager window's fade out on close?

    For the newer version of Palm Desktop and Hotsync Manager, how do you make the hotsync manager window stop fading out when closed or "done".
    It stops me from being able to access ANYTHING until the fade is completed, and that is a complete waste of my time, also when I have much more important things going on (alarms/alerts) that can't be silenced during the fade.
    And ... how do you disable the splash screen startup for the Palm Desktop, and how do you get the palm desktop to conform to standard windows start practices, so that when you open the program it comes up on the screen at the same windowed size I closed it at?
    Thanks!!
    Post relates to: Centro (Sprint)

    Thank you ... however it was already set for "normal window".  I deleted the icon and recreated and that seemed to fix it though, not sure why.
    As for the splash ... its a waste of time ... the application loads faster than "they" would expect so all it does is extra advertizing for Access without having a purpose.  And again, its not just a second or so, its 3 to 5 seconds depending on what else I'm doing.. and if I'm reading an email while double clicking the icon to have it start on my second monitor.. the spash covers my email till the program's running.
    The worse delay is the fade.  You already admit that it can vary depending on a number of things.. well that programmer may have thought it were very cool on a quad core intel @ 3 GHz .... try it on a 1 G p3, with an older video card.  Or try it on an older laptop .... the delay is 6 to 10 seconds while it fades it self to the nethers, it certainly didn't "CLOSE" when I told it to.. it took its dear sweet time.
    The programmer probably thought "hey this is really cool mahn.. watch it fade away..."  by the third time of being into or out of the settings that re-triggers the closing fade, I was ready to kill that programmer.  Make him suffer for the stupidity of his vision.  Its one thing to make it "cool" and give people the option to live with that plain jane every day FASTER response... and quite the other to force people to relive your "cool" idea every f**king day, every time they go into settings, or need to see the log for what failed on backup.. etc.
    Ever go upto a windows XP pc when someone says it seems slow and *de-select* the "FADE" option for their menus??  (Display Properties -> Appearance -> Effects -> deselect "use the following transition") I have ... and its amazing how perception changes because the menus are there NOW, not taking their time to pull off some grandious entrance ... the first time it may have been cool.. but by the 500 th time you've been into your start menu a year into the game.. that slow fade crap is working on your every nerve.
    Poor impulse control would have had me killing the programmer that put that fade in there.. now I just want to put him in for an hour or two of waterboarding.
    It was bad programming to force some idiots idea of a "cool" view on people, and the programmer should be shot down for it.  It shouldn't be... and it wasn't there before, so some mornon actually went out of their way to put something in because the program just wasn't "cool" enough for them.. and then they decided to F the rest of us by making it so we couldn't DEselect that slice of programmers heaven.
    It may sound like I'm blowing things out of proportion... but really, it was fine the way it was, now they've gone and F'd it up.  Moves for the better get little publicity, you have to live with the knowledge no one is bitching, but when you screw something up ... you need to fix it and need to hear how badly your lack of vision made things for others.
    and.. if they wont' fix it.. its coming off the pc.. I'll go back to the old "uncool" version.
    Post relates to: Centro (Sprint)

  • How do you disable iTunes helper?

    The iTunesHelper.exe application seems to run constantly from startup (according to task manager), even when I've never even opened iTunes, how do you disable this?
    I'm trying to make my computer run a little more effeciently. Thanks.

    Open msconfig, go to startup tab and uncheck the checkbox for helper.
    Is it causing problems? I complain about iTunes resources more than the services Apple wants running.
    Message was edited by: camoracer

  • How do you disable the "Touch to return to call" banner on the top of the screen?

    How do you disable the "Touch to return to call" banner on an iPhone 4s and it is factory unlocked?
    Thank you.

    If your trying to just simply have it not show while navigating the OS during a call, then there is no option to disable it. If it's a problem where it's continuing to show after you disconnect a call it could be a fault in code that fails to run the script to terminate the banner need upon disconnect. I would restore the phone using itunes as a first troubleshooting step. Another avenue might be an issue with the phone failing to recognize the end of call signal from the carrier. In which case I would have the SIM card changed. Easy thing to do at your local carrier store.

  • How do you disable "Connect to iTunes to Enable Push Notification" Message when opeing an app? Thie message is compeleyely annoying and theres is no way to cancel it. You have to clcik on "OK" to use the app.

    How do you disable the "Connect to iTunes to Enable Push Notifications" prompt when opening apps on an iPad (OS7)? The message is completely annoying and there is no way to cancel it. You must click on "OK" to use the app. I have already disabled notifications on those apps in the Notification Center.

    The best way to do this is to leave all files unchanged, but render the file containing that horrendous bird noise unreadable to the system. Open a terminal window, and paste this command:
    sudo chmod 000 /System/Library/Frameworks/Social.framework/XPCServices/com.apple.twitter.xpc/C ontents/Resources/TwitterSent.caf
    That's it. Your Tweets should hereinafter be silent unless you change TwitterSent.caf's permissions again.

  • How do you disable iPod Auto Update with iTunes?

    How do you disable iPod Auto Update with iTunes? I know there is a key press combo that will do it but I forget which keys. Anyone?
    Intel Piii   Windows XP Pro  

    Keep iTunes from automatically updating your iPod
    Another Easier Alternative:
    While connecting the iPod to the computer, hold down the Shift + Ctrl keys in Windows (CMD + Option keys on a Mac). This will stop the iPod from auto-syncing with iTunes. The iPod will then appear in the iTunes source list. Wait until you are sure the iPod has mounted, and that it will not auto-sync and then you can release the keys. This action may take between 3 and 25 seconds depending on your computer.
    You can then ‘right-click‘ on the iPod icon in iTunes’ source column and select iPod Options, then check the box that says “Manually manage songs and playlists”. You can now manage your library without losing any songs on the iPod.
    Note: If connecting to a different computer than the ‘iPod’s Home Computer’, iTunes will ask you if you want to update your iPod and give you an opportunity to opt out. This will not happen if you connect to the ‘Home’ computer – iTunes will auto-sync without warning!. Best to know the difference.

  • How can you disable receiving Broadcast Messages?

    How can you disable receiving Broadcast Messages 
    Without deleting your Contacts ?

    I don't have access to my phone at the moment so I'm going on memory alone.  On your homescreen follow Options>Advanced System Settings>Cell Broadcasting, or maybe you'll see Options>Device>Advanced System Settings>Cell Broadcasting.  I'm sorry I can't be more specific without a phone in front of me.
    Let us know if that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • How do you disable voice announcements on the Gusto 3 ?

    How do you disable Voice Announcements on the Gusto 3 >

        Thanks for reaching out to us, tobrien459! May I ask what readouts you are getting in order for me to make sure I provide you with the most accurate information?
    I'm thinking you are looking for this:
    From the Home screen, press the Left Soft Key
    Menu > Settings > Accessibility > Easy Set-up.
    2. Follow the screen prompts to choose settings for
    Full Readout, Menu Readout, Digit Dial Readout,
    Alert Readout, TXT Message Readout, Browser
    Readout, and Flip Open & Talk
    Let me know if this is what you need.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • How do you disable the automatic list detection in Pages 5?

    How can you disable or deselect the automatic list detection in Pages 5?  I want to stop the auto numbering.

    Menu > Pages > Preferences > General > Editing: uncheck Automatically detect lists
    Peter

  • How do you disable remote access for mac routers

    how do you disable remote access for mac routers

    Hi, I'd never buy an Apple router again, but see if reverse thinking works here....
    https://discussions.apple.com/thread/3926392?tstart=0

  • How do you change the click box properties (line colour and width) in Captivate 7.0?

    How do you change the click box properties (line colour and width) in Captivate 7.0?

    Yes certainly, we can do that, insert a smart shape and use it as a button, then go to the properties pane, change the Alpha to 0, that will make it transparent, and add the stroke color as red and increase the width.
    In case of a button, you have to select button type as transparent and do the same.
    Thanks.

  • HT201365 how can you disable this feature?Don't want to have to use passcode everytime i need to use the devise.

    How can you disable the password feature? Don't want to have to use code every time I need to use the phone.

    goto settings->general->passcode lock->turn passcode off

  • How do you disable "FILE IN USE" pop-ups so you can actually edit and delete PDFs?!

    Can someone please help me with this query:
    How do you disable "FILE IN USE" pop-ups so you can actually edit and delete PDFs?!
    I continue to have a pop saying that either the file in open somewhere in the serve- which it is not- and I cannot delete a particular pdf or edit it.
    It's incredibly frustrating and in the end I end up having four files with different names because it won't let me edit the original file!!!!

    Hi Amila1,
    Are the pdfs stored on a network location?
    If so is the Preview pane turned ON?
    Please check the doc: http://kb.globalscape.com/KnowledgebaseArticle10862.aspx
    Regards,
    Rave

Maybe you are looking for