How do you disable the IE8 ActiveX warning when previewing HTML files created in Dreamweaver?

All,
I'm trying to find a workaround to disable an annoying warning message in Internet Explorer 8 (IE8). 
Explorer generates a security warning if you open a local file (i.e. one stored on your local hard drive and not the server) that contains scirpts or ActiveX controls (including JavaScript).  Button actions such as opening a PDF work but the rollovers will not.  Everything works fine if the user clicks on the warning banner, clicks "allow content", and then clicks "Yes".  Since this file and content may be distributed to many people to run on their local systems, it would be better if they didn't have to perform these three clicks or modify their browser security settiings.
Previous versions of Dreamweaver supported a command called "Insert Mark of the Web" which inserted the following line of code: 
    <!-- saved from url=(0014)about:internet -->) 
Adobe removed this command, so the line of code must now be inserted manually.  I've tried inserting it in various lines of the HTML code, but doing so results in the same problem: the rollovers work, but the button actions do not.
Does anyone know of another work around?
Thanks,
Garrett 

I have not used this program, it may help you http://www.markoftheweb.com/
Gramps

Similar Messages

  • How can I disable the low ink warning messages.

    How can I disable the low ink warning messages.  The Photosmart Plus B210 printer is connected wirelessly to my Mac over a home network..

    Open up a terminal (use spotlight to search for 'terminal')
    Find the process ID of the HP Device monitor by doing 
    ps -eo pid,command | grep "HP Device Monitor"
    The process id will be the number that is printed. Sometimes you may see two results, the correct result to use should print "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
    Then using the number you got from the first step, run the following command.
    sudo kill -9 <pid>; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
    You will be prompted for your admin password.
    Below is an example of when I ran it:
    John-MacBook-Pro:~ john$ ps -eo pid,command | grep "HP Device Monitor"
    90509   /Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor
    90513 grep "HP Device Monitor"
    John-MacBook-Pro:~ john$ sudo kill -9 90509; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"

  • How can you disable the fm radio app on the 7th gen nano?

    How can you disable the FM radio app on a 7th gen NANO?

    Why would you want to? Unless the app is open, you won't be using the functionaloty or using extra power etc.

  • How do you disable the "Touch to return to call" banner on the top of the screen?

    How do you disable the "Touch to return to call" banner on an iPhone 4s and it is factory unlocked?
    Thank you.

    If your trying to just simply have it not show while navigating the OS during a call, then there is no option to disable it. If it's a problem where it's continuing to show after you disconnect a call it could be a fault in code that fails to run the script to terminate the banner need upon disconnect. I would restore the phone using itunes as a first troubleshooting step. Another avenue might be an issue with the phone failing to recognize the end of call signal from the carrier. In which case I would have the SIM card changed. Easy thing to do at your local carrier store.

  • How do you disable the Notification Center in iOS 8?

    How do you disable the Notification Center in iOS 8?  It seems the update has killed this ability.

    Are you in the "today" or "notifications" part of notification center?
    Settings--notifications works for the notifications part but doesn't control the today part of notification center. For that you have to drag down notification center, tap on today, and choose edit from the bottom. From there you can turn off widgets, activate new ones, and change the display order.

  • How can I disable the change of color when changing background in ios7?

    how can I disable the change of color when changing background in ios7?

    For txt messages you can change the option of whether previews are shown (Settings >> Messages >> Show Preview Toggle). Switching this "Off" will still show a notification of a missed txt message, but it will not show text from the message itself.
    Unfortunately, similar functionality does not currently exist for phone calls; however, the new iOS release (scheduled for September, I think rumor has it) will revamp the way notifications are handled, and there maybe an elegant solution for you then.

  • HT4993 How do you turn the weird sound off when sending a text using the iPhone 4S

    How do you turn the weird sound off when sending a text using the iPhone 4S?

    Go to Settings-Sounds-Text Tone and change to None.  You're referring to the sound when posting a message to someone else, correct?  The only issue is if you set to none, you will not hear the incoming either.

  • How do I disable the brushes popup menu when I left click in Photoshop CS5?

    How do I disable the brushes popup menu when I left click in Photoshop CS5? I am trying to use the clone stamp and I am not able to get a sample because of this popup menu.

    LOL,  I can't even begin to complain with the number if times I misread questions, and then try to break my own record for the number of typos in a single post.
    The image above was taken on a photgraphic weekend where the group (of all young ladies ) I was travelling with, set us a photography challenge.  The one above was my response to a 'faceless portrait'.  The only other one I attempted was this response for a picture of a 'wild animal', featuring camera club president Liz.
    Oh what fun we had, laughing and laughing until our faces fell off.
    [EDIT]  Both taken at Karamea, which some visitors to NZ might recognise as the western end of the Heaphy Track.

  • How do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?

    how do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?

    I don't have good news. You will need to repartition and reformat the hard drive in order to determine if the drive is still OK or if it needs to be replaced. If your computer is a 2011 model or later do the following:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.
    If your computer is pre-2011 model, then locate the original installer discs that came with the computer. Then do this:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now download a version of OS X from which to upgrade from your Purchases page in the App Store.

  • On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

    On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

    Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

  • TS3212 how can you remove the pop-up blocker when dowload itunes using google chrome

    how can you remove the pop-up blocker when dowload itunes using google chrome ??

    Set that domain as '''Allowed'''. <br />
    https://support.mozilla.com/en-US/kb/Pop-up%20blocker#w_pop-up-blocker-settings

  • How do I disable the Safari quit warning?

    Talk about annoying. How to I disable the warning that asks me if I am sure I want to quit? I am pretty sure that when I choose Quit I am sure I want to and I am sick of choosing Shut Down, and coming back a day later to see it didn't shut down because Safari couldn't quit, and that my monitors have been blazing for a day on the same screen.
    Can't find anything in the prefs to shut this stupid warning off.

    jsowers897 wrote:
    Talk about annoying. How to I disable the warning that asks me if I am sure I want to quit? I am pretty sure that when I choose Quit I am sure I want to and I am sick of choosing Shut Down, and coming back a day later to see it didn't shut down because Safari couldn't quit, and that my monitors have been blazing for a day on the same screen.
    The warning can be disabled: Safari > Preferences > Tabs, uncheck the box for "Confirm when closing multiple pages."
    The warning occurs when you try to quit when you have +multiple windows or tabs open+. This optional warning is the result of requests from many of us who use the Command-W shortcut to close a tab, since it is very easy to accidentally hit Command-Q instead and lose everything one was working on.
    Message was edited by: Rachel R

  • How do you disable the automatic list detection in Pages 5?

    How can you disable or deselect the automatic list detection in Pages 5?  I want to stop the auto numbering.

    Menu > Pages > Preferences > General > Editing: uncheck Automatically detect lists
    Peter

  • How do you disable the feature to 'keep iMessage conversations running between two devices'?

    I have 2 apple devices- an iPhone 4 and an iPad 2. When I set my iPad up and set iMessage up set it offered me the option to keep iMessage conversations running between the two devices, and i pressed yes. I now cannot stand this feature because every time I recieve an iMessage, I get two alerts, one on each device. How do you disable it?

    Hi DeltaNomad,
    Welcome to the Support Communities!
    You can disable the Substitutions feature completely, or add words you frequently use to the substitutions list.  See this information from the Pages User Guide:
    Replace text automatically - Pages Help for Mac
    http://help.apple.com/pages/mac/5.1/#/tanca15d8a79
    When Text Replacement is turned on for the document, a checkmark appears next to Text Replacement in the Substitutions menu. You can deselect Text Replacement to turn it off, but existing text won’t change unless you select the text, and then follow the steps above.
    Choose Edit > Substitutions > Show Substitutions (from the Edit menu at the top of your computer screen).
    In the Substitutions window, select the Text Replacement checkbox, then click Text Preferences.
    Click Text, click the plus sign, then type the text you want to replace (such as “teh”) in the Replace column.
    Type the word you want to replace it with (such as “the”) in the With column.
    Close the window when you’re done editing substitutions.
    Click a button to replace all occurrences of the replacement text in the document, or only in the selected text.
    Cheers,
    - Judy

  • How do you disable the double dock and top menu bar on my second monitor.

    I need to get rid of the double dock bar and top bar on my second monitor. It is killing me and my work flow. How do you disable this feature.

    Try double tapping the upper left cornerof the touch pad. It worked for me...   -Ed

Maybe you are looking for

  • ICal print format

    I've used Now Up-to-date for over ten years. I would like to switch to iCal, totally, except I can't make it print the way I want it to so it will fit into my planner. I want to see a month, printed landscape on an 8.5x11 sheet, split down the center

  • W32TM reverting to old settings.

    Hi all, I have an issue which is driving me crazy and thought I would reach out to the experts. I am trying to update the time sources on a few servers running 2008 SP2, however it continually reverts back. Scenario - Windows Server 2008 SP2 - Not jo

  • UDPWrite in a loop. "A Windows Sockets function call returned an unexpected error."

    Hello together, i use UDP Support Library in NI CVI 9.0. When i wait for receiving a packet at the pc to send then a packet from the pc, the functions UDPRead and UDPWrite work fine. If i want to test the maximum throughput, i put the UDPWrite in a l

  • Can I increase site or template resolution in iWeb?

    I know that I can increase resolution of a single page from 800 pixel width to whatever I prefer from the pallet menu, but I would like to increase resolution of entire template/site to 1024 width. Is there a way to do it? I searched forum and looked

  • How do I get ldapsearch to stop automatically minimizing base-64 encoded results?

    It appears that: when executing an ldapsearch, any result that is base-64 encoded will automatically be decoded. In cases of the user password that is an encoded salted hash, it ends up removing the "SHA" from the password value. This is not desired.