How do you disabled iPhone 4

How do you take off disabled a iPhone 4

If the iPhone is disabled you need to restore to factory settings as shown in the article below:
http://support.apple.com/kb/HT1808

Similar Messages

  • How do you disable i messaging when switching to a non iphone?

    How do you disable i messaging when switching to a non iphone?

    Nope, that doesn't actually do the trick.  It might keep i messages from going to your i phone but still won't allow them to go to your new device. 

  • How do you disable a restrictions code with out resetting your iPhone and the password

    How do you disable your restrictions code without resetting your phone and without putting in the code?

    No, there isn't. But you can restore your stuff if you have a current backup to restore. Otherwise, you are S.O.L.

  • TS2890 how to activate disabled iphone?

    how to activate disabled iphone?

    If your phone is disabled then there are instructions on this page for how to reset it : http://support.apple.com/kb/HT1212 - you should then be able to restore/resync your content to it

  • How to unlock disabled iphone 5s

    Dear sir,
    i have disabled my iphone 5s, how to unlock disabled iphone 5s.
    with regards
    Amrinder singh

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How do you disable the feature to 'keep iMessage conversations running between two devices'?

    I have 2 apple devices- an iPhone 4 and an iPad 2. When I set my iPad up and set iMessage up set it offered me the option to keep iMessage conversations running between the two devices, and i pressed yes. I now cannot stand this feature because every time I recieve an iMessage, I get two alerts, one on each device. How do you disable it?

    Hi DeltaNomad,
    Welcome to the Support Communities!
    You can disable the Substitutions feature completely, or add words you frequently use to the substitutions list.  See this information from the Pages User Guide:
    Replace text automatically - Pages Help for Mac
    http://help.apple.com/pages/mac/5.1/#/tanca15d8a79
    When Text Replacement is turned on for the document, a checkmark appears next to Text Replacement in the Substitutions menu. You can deselect Text Replacement to turn it off, but existing text won’t change unless you select the text, and then follow the steps above.
    Choose Edit > Substitutions > Show Substitutions (from the Edit menu at the top of your computer screen).
    In the Substitutions window, select the Text Replacement checkbox, then click Text Preferences.
    Click Text, click the plus sign, then type the text you want to replace (such as “teh”) in the Replace column.
    Type the word you want to replace it with (such as “the”) in the With column.
    Close the window when you’re done editing substitutions.
    Click a button to replace all occurrences of the replacement text in the document, or only in the selected text.
    Cheers,
    - Judy

  • How do you disable the "Touch to return to call" banner on the top of the screen?

    How do you disable the "Touch to return to call" banner on an iPhone 4s and it is factory unlocked?
    Thank you.

    If your trying to just simply have it not show while navigating the OS during a call, then there is no option to disable it. If it's a problem where it's continuing to show after you disconnect a call it could be a fault in code that fails to run the script to terminate the banner need upon disconnect. I would restore the phone using itunes as a first troubleshooting step. Another avenue might be an issue with the phone failing to recognize the end of call signal from the carrier. In which case I would have the SIM card changed. Easy thing to do at your local carrier store.

  • HT1695 How do you disable an existing WiFi auto connect?

    I have an Apple iPhone 4.  Under Settings > General > Network > WiFi it states "Known networks will be joined automatically.  If no know networks are available, you will be asked before joining a new network." My question is, how do you disable the automatic connection to known networks?
    Thanks,
    Sue

    If you are near the Wifi network you want to disable, it will be listed in the listing of available networks, obviously.
    Tap the blue arrow on the right side of the wifi's name.  If the network offers auto join and auto login you can turn them off here.  Not all networks offer this. If you just want to keep your phone from automatically joining a specific network you have used in the past you can tap Forget this network and you will be disconnected from it.
    Or if you want to disable all wifi networks you have joined in the past you can reset your network settings.
    Settings => General => Reset => Reset Network Settings
    this will reset your cellular connection as well as your wifi connections.  You will have to enter any ID and Password information for the networks that require you to log in, such as your home wifi network (You do have your home network password protected right?) but you will have disabled your wifi connections.

  • How do you disable iPod touch 8gb 4th generation 6.1.3, How do you disable iPod touch 8gb 4th generation 6.1.3

    How do you disable iPod touch 8gb 4th generation 6.1.3 for 21,000,000 minutes

    To undisable the iPod
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How do you disable voice announcements on the Gusto 3 ?

    How do you disable Voice Announcements on the Gusto 3 >

        Thanks for reaching out to us, tobrien459! May I ask what readouts you are getting in order for me to make sure I provide you with the most accurate information?
    I'm thinking you are looking for this:
    From the Home screen, press the Left Soft Key
    Menu > Settings > Accessibility > Easy Set-up.
    2. Follow the screen prompts to choose settings for
    Full Readout, Menu Readout, Digit Dial Readout,
    Alert Readout, TXT Message Readout, Browser
    Readout, and Flip Open & Talk
    Let me know if this is what you need.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • How do you disable the automatic list detection in Pages 5?

    How can you disable or deselect the automatic list detection in Pages 5?  I want to stop the auto numbering.

    Menu > Pages > Preferences > General > Editing: uncheck Automatically detect lists
    Peter

  • How do you get iPhone 5 to connect to iMac through bluetooth?

    How do you get iPhone 5 to connect to iMac through bluetooth?
    I know the basic steps, but all I get is pairing unsuccessful. I'm using an older bluetooth, would that make a difference? I got connected once with a Motorola bluetooth, but can't reconnect. TIA!

    Try the Bluetooth Troubleshooting steps here:
    http://support.apple.com/kb/TS2756
    Note that you need to have Personal Hotspot set up with your carrier and on your iPhone before you can connect the computer.
    Regards.

  • How do you download iphone 4 apps to a dell pc to make room for apple os update

    How do you download iphone 4 apps to a dell pc to make room for apple os upgrade and transfer it back to the iphone

    Follow the instructions here or here.
    (115390)

  • How do you restore iphone as a new phone?

    Hi there,
    How do you restore iphone as a new phone? Actually, I know how to restore it but I'm not sure how to get the files back on after... I don't really understand how this will be any different from just restoring from a backup if I'm just going to put the content on later anyways.
    Any help or clarification would be greatly appreciated!
    The reason I'm asking about this is because my battery life on my 4S is soooo bad!
    Brandon

    Ah. So, the reason it'll help to use as new device is because typically the app data is not the issue. It's a corrupt system file. So using new device takes away any corrupt system files and almost always solves most any issue. However it does cause the pain of having to add everything back. I've done this in cases where restoring from backup just didn't solve my issue. It ***** but is sometimes needed.

  • How do you deal Iphone 5 with LTE  and at&t

    how do you deal Iphone 5 with LTE  and at&t

    I can make no sense of your message.

Maybe you are looking for

  • Search in Sharepoint Foundation 2013 sp1 do not work

    When we type anything in any search bar, the result is "Sorry, something went wrong" with Correlation ID: aa0fb79c-5878-d0b4-2016-c1ebc17f3336. The server was originally installed with the 2013 Foundation beta version on a 2008 R2 server (single serv

  • How to burn boot cd in 10.7.5?

    I have numerous apps crashing upon launch and wish to run disk utility and repair the disk.  I have an older MacBook that cannot run Mountain Lion.  I'm running 10.7.5 and wish to create a bootable CD with disk utility on it so that I can repair the

  • Precise movement and drawing of objects in CS6

    Hi, having used CS3 before, I've recently bought the CS6 package. I set all Preference settings they way they were in CS3 but I'm having difficulties moving a selected object in precise orthogonal (or diagonal) orientation. I'm used to seeing an "ori

  • Cannot set FlashVars with Flash ActiveX 10.1.53.64

    Hi, My external container isn't able to set FlashVars since I upgraded to Flash version 10.1.53.64. What's the matter ? A simple for loop didn't list anything in the loaderInfo.parameters object (for (var val:String in loaderInfo.parameters)). It did

  • Updating CPS script tables

    Hi all, Beginner question. What is the syntax/appropriate method to update an entry in a self-defined CPS table? I am able to insert values, but the method/syntax for updating specific columns is not clear. Thanks to some helpful posts I have the fol