How do you display a theme across multiple displays?

I have three monitors set up. The problem is the theme will only work for one display. Is there a way to fix this. Google chrome themes span complete width of screen. Thanks.

I found this after I posted. Works like a charm
If the sheets are in the same document, you may do what you want .
At least if you accept that changes are always made in the same table of a given sheet.
Assuming that the "main" table is Table 1 in Sheet 1
In the table Table 2 of Sheet 2 insert the formula :
=Sheet 1 :: Table 1 :: D12
and every value inserted in cell D12 of table "Table 1" of sheet "Sheet 1" will be reflected in the other table.
Yvan KOENIG (VALLAURIS, France) mardi 31 mai 2011 20:37:03
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Similar Messages

How do you share Aperture file across multiple users on same Mac?

How do you share Aperture file across multiple users on same Mac? Seems this should be a preferences choice.

When you share your library between users, you may run into permission and ownership problems, if both users are editing the Aperture library and not only reading it. To avoid that, it helps to put the Aperture library onto a separate disk or a separate partion of your hard drive. For s separate partition or disk you can enable the "ignore ownership on this volume" flag. Then all users can access the library as owners of this library.
You might try to put the aperture library into a shared folder on your mac, but that has caused problems recently, i.e. when the library also contains video files.
Regards
Léonie

How do you Spread an Image across multiple pages and print?

I'm trying to create a large poster to be put on a bulletin board. I've mangaed to spread the image across multiple pages but I can't figure how to be able to print the pages have the edges line up successfully after cropping. I've been playing with the bleed settings but can't figure it out. Here a shot of what im working with:
Im working in CS3 on Mac OS X

Create your InDesign document at your final size and when you print it out put a check mark in the box for Tile

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you display a swf video / videos when you mouse over

How do you display a swf video / videos when you mouse over, It'll be something like a pop up but just that it doesn't open in another windows but within the same window and will be like a pop up roll over image.

Thank you for the reply.
I've been putzing around with it and came across the 'SetEventHandler' object and thought I'd try and make that one work.
Here's what I've got so far.
       <mx:SetEventHandler target="{turnAroundMovie}" name="handleMovieClip" handler="stopMovie()"/>
And then my fuction.
   <mx:Script>
        <![CDATA[
            private function stopMovie():void{
                turnAroundMovie.stop(); 
        ]]>
    </mx:Script>
My first instinct was the simple stop(), but that didn't fly. I even added a stopMovie frame in my .swf and tried a gotoAndStop('stopMovie'); but that didn't fly either. And that's kind of where I'm stuck at.

How do you display exact duplicates in Itunes 11. It is now missung under the file?

How do you display exact duplicates in Itunes 11. It is now missung under the file?

Right-click on this direct link to ExactDuplicates and "download" or "save link as..." to a location of your choice. Double-click to the file to run it. You should get something a bit like this:
If your system will allow it my script will produce a progress bar so you can see what is going on, otherwise you will have to be patient, it will carry on working in the background.
After scanning for duplicates it then adds them to a new playlist. For large libraries this process can be quite slow. (Very slow if you also have old hardware like me.)
Finally you'll get a results window like this (from a different test run, as I didn't have time for the full one to finish when I was grabbing screenshots).
You can use shift-delete to remove selected tracks from the library as well as the playlist. Leave at least one track behind from each repeated group and don't send anything to the recycle bin unless you are sure you have more than one physical copy.
The DeDuper script has several advantages over cleaning by hand. Automating the process allows preservation & amalgamation of ratings, play counts, playlist membership, etc. See this thread for more detail.
tt2

HT1386 HOW DO YOU DISPLAY DUPLICATES IN PLAYLISTS?

How do you display duplicates on the playlist with the new itunes format?

Note that, as with the iTunes feature, this lists make no distinction between "originals" and "dupes", you have to decide which is which.
There is also my DeDuper script for automatically removing duplicates copies but keeping one remaining copy of each set. This can preserve ratings, play counts, playlist membership, etc. which are lost in a manual clean up. Please take note of the warning to backup your library before deduping. See this thread for background on deduping and the script.
If you want to manually remove duplicate tracks use shift-delete to remove selected tracks from the library as well as the playlist. Keep one of each repeated group of files and don't send the others to the recycle bin unless you are sure that there are multiple files on the disc as opposed to multiple entries to the same file. Same advice to backup applies.
tt2

How do you display a new image in webdynpro view?

How do you display a new image in webdynpro view?
Where is the image stored and how do we specify the image path?

hi ,
The UI element Image enables you to integrate graphics into the Web application in a format that is processed by the Web Server u2013 for example, GIF, JPG, and PNG format. Height and width of the graphic can be specified using the properties height and width. The graphic is displayed without borders.
saveur image as mime
with Mime Objects u cn upload doc , jpeg, or giff files from our local system into the webdypnpro system .
Right click on ur component->mime object->import
In the transaction sicf/bc/webdynpro , u cn check your component name there you can view the mime objects created by you .
also refer the SAP online help :
http://help.sap.com/saphelp_crm50/helpdata/en/46/bb182fab4811d4968100a0c94260a5/content.htm
to knw more abt mime repositories.
http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm
regards,
amit

How do you display a price in 2 decimal spaces? e.g. $39.95000

Does anyone know how do you display a price in 2 decimal spaces? e.g. $39.95000
jsp code preferred please,
thanks in advance!

hi,
this is jsp code just follow code
<%@page language="java" import="java.text.*" %>
<%
double d=39.95000;
NumberFormat fmt=new DecimalFormat("0.00");
out.println(fmt.format(d));
%>
jpreddy

How do you display total time for playlist in Itunes 11

how do you display total time for playlist in Itunes 11

"I can see the total time in my playlist on the computer but not on my device??"
I have just posted a question asking the same!
Did you have any joy?

How do you display file type in PS Elements 10?

How do you display file type in PS Elements 10 in the Organizer for each photo?
I know you can right click and look at meta data.
In PSE 7 it was displayed under each photo.

Two things:
1. Set the View option to show file names:
2. Ensure your thumbnails are large enough to display the data:
Ken

How do you display Movies only in iPhoto?

How do you display Movies only in iPhoto?

Create a Smart Album like this (depending on your iPhone model)
You'll see your iPhone pictures and all movies in the library.
OT

ITunes 11 ... How do you display duplicates?

iTunes 11 ... How do you display duplicates?

That function isn't in iTunes 11. Apple has said there will be a small update that will add that function back but no time frame was given.

How do you display excel formulas?

How do you display EXCEL formulas in Numbers once imported?

select the cell and look at the bottom of the window or doubel click the cell:
after double clicking cell:

How do you display the tables of EBS R12 (VIS)?

Hi,
My sqlplus does not work but I have an Oracle sqldeveloper. How do you display the tables info of order management module in EBS R12 for windows?
For example:
Base tables
oe_order_headers_all
oe_lines_all
oe_lot_serial_numbers
oe_sales_credits
oe_price_adjustments
Interface tables:
OE_HEADERS_IFACE_ALL
OE_LINES_IFACE_ALL
OE_RESERVTNS_IFACE_ALL
OE_CREDITS_IFACE_ALL
OE_PRICE_ADJS_IFACE_ALL
OE_LOTSERIALS_IFACE_ALL
OE_ACTIONS_IFACE_ALL
Thanks,
Fernando

Hi Fernando,
The tables for Order Management will mostly be in ONT schema - APPS schema only holds Views, Synonyms, PL/SQL Packages and similar abstractions.
In SQL Developer make a connection to the APPS schema, then go to Synonyms and you'll see the tables (note you should filter as there are lots of objects in Apps schema)!
In the synonym SQL tab you can see the base schema for the table, e.g.
CREATE OR REPLACE SYNONYM "APPS"."OE_ORDER_HEADERS_ALL" FOR *"ONT"*."OE_ORDER_HEADERS_ALL";
Make a connection to the base schema, e.g. ONT.
Then you'll see the ONT tables under the Tables folder.
Alternatively, connect as apps and execute SQL "desc OE_ORDER_HEADERS_ALL"
Or look at the APPS schema views instead, e.g. OE_ORDER_HEADERS
Regards,
Gareth
Edited by: gareth.roberts on Aug 18, 2009 11:52 AM

How do you display a theme across multiple displays?

Similar Messages

Maybe you are looking for