How do you do stop motion in iMovie 10.0.2?

All the videos I have found show in an older version of iMovie.  The main problem is figuring out how to shorten the length of the photo time.

You can select multiple photos and set the duration for all of them in one go see:
https://discussions.apple.com/message/25576391#25576391
This post might also be of interest:
https://discussions.apple.com/message/15074194#15074194
Geoff.

Similar Messages

  • How do you do fast motion on Imovie on your ipad?

    I've tried for hours searching and asking questions!!! Any one that can help please do so!

    Here is one app and there are others, mostly free, similar to it on itunes.
    http://itunes.apple.com/us/app/activity-monitor-top-free/id445279837?mt=8
    From an ipad forums post :
    If you experience your iPad running a bit slow you probably have a ton of applications running in the background. The iPad’s memory is limited, so in order to avoid performance issues you can close background applications by following the steps below.
    . To close background applications press the Home button twice and when the recently used apps bar appears, tap and hold down the app you wish to close.
    You will notice that after a second or two of holding down the icon, all the icons in the recently used apps bar will begin to move from side to side. You will also notice that a small red circle with a minus sign will appear on the top-left corner of the icon. Tap the red circle to close the background applications. Once you’ve closed several applications tap on the Home button again and you will return to the Home Screen or App you were using. Your iPad should feel a little snappier.

  • HOW TO GET THIS STOP MOTION LOOK

    TRYING TO FIND OUT HOW TO GET THIS STOP MOTION LOOK. IS IT DONE WITH EDITS OR PLUGIN
    EXAPLE AT THIS SITE
    http://www.brothersstrause.com/vide...h.php?work_id=1

    I think a lot of that was achieved in camera by manipulating frame rates and so forth.
    Also it looked like some of the awkward jerkiness was achieved by filming the talent actually moving backwads and then reversing it in post. I saw a behind the scenes for a movie that used that technique to get that look. I think it was the grudge or the ring.

  • How do you get timeline view on imovie 08  and speed up a clip on imovie 08

    how do you get timeline view on imovie 08  and speed up a clip on imovie 08

    Hi
    You can not - Nobody else (if not a very selected few at Apple dev.group)
    TimeLine was lost in iMovie'08 and 09 and a very simple one re-introduced in iMovie'11
    Speed Change - Was omitted in iMovie'08 - and returned in iMovie'09 - BUT has to be used in a certain way - the glider/slide if used - will destroy the audio (a Known BUG - in both iM'09 and iM'11) but use of pre-set fixed no. 25% 50% 100% 200% etc. will work.
    Yours - still using iMovie HD6 - and LOVE it - Bengt W

  • How can you import AVCHD movies using iMovie '11?

    How can you import AVCHD movies using iMovie '11?

    H264 is one example of a codec used in MPEG-4 video encoding. Windows Media is a codec. Sorenson is a codec. DVPRO is ...etc....
    Play a source video file and do a get info on it and tell me what the audio and video details are.

  • CF8 dev edition - how do you start / stop server?

    mac osx - CF8 dev edition - how do you start / stop server?
    I would like to turn off CF8 auto start on boot up and
    manually be able to start and stop the server...
    Q: How do I set this up?

    > Now, I am also interested in turning off CF8.01 "auto
    start on boot up"
    > (currently set to that now)
    >
    > Q: How do I turn this auto start off?
    >
    > Hi folks - I'm still interested in setting the CF server
    on MAC OSX 10.5 to
    > *NOT* Auto Start - How do I turn this auto start off?
    I googled "cf8 osx don't autostart", and turned up this:
    http://www.feed-squirrel.com/index.cfm?evt=viewItem&ID=96307
    Does that make sense? It's all a bit Greek to me because I've
    not used a
    Mac for...
    crikey...
    TWENTY YEARS.
    Adam
    (suddenly feeling rather old)

  • How do you add the motion path of a tracking point to a separate clone stamp?

    How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
    Is there a way to keep the clone stamp's initial position and then add the path onto it?
    I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.

    I have spent two days trying to find a solution to this exact same problem. I have seen some overly complex solutions that probably work but trying to figure out the explanations is like trying to understand someone describe drag coefficients of rotary wing aircraft. While I am sure they work, they are way above my comprehension. I wanted an intuitive and straight forward solution for something that shouldn't require some arcane technique to fix.
    What I did:
    1) I used the Clone Stamp tool to paint over the spot on the wall I wanted to remove.
    2) picked a more easily discernible point of reference for Tracking. In my case, I used a poster on the wall.
    3) As per the instructions here, https://www.video2brain.com/en/lessons/removing-an-object-with-clone-stamp, I pasted the Attach Point data from the Tracker into Clone -> Transform - > Position 
    However, that didn't work for me as the object I was painting was not the object I was tracking. The solution from the video was simply moving my cloned spot to the tracked object instead of leaving it where I wanted it. So...
    4)  I then manually adjusted the Anchor Point of the Clone back to the original spot I wanted to cover.
    I played footage and the cloned region successfully moved with the spot I was covering.
    This is what I was able to figure out. I'm not an advanced user. I only use After Effects every couple of months when I need to fix minor things in footage, so I've only learned to use what techniques I need for the job at hand. No doubt, experienced users may shake their heads at my simplistic fix. I'm sure my technique would be wholly inadequate for situations far more complex than fixing spots on a gray wall, which is why my eyeballs cross when reading suggestions that seem way more involved than one would expect for something as seemingly minor as this. It's just a spot! It should be super easy to remove, right? Well, that's what I was looking for and that's what I came up with. I hope it helps.

  • How do you compile movie on new iMovie app?

    I have been a user of the prior iMovie software.  I now have the newest version and am puzzled since when compiling a new video I cannot figure how to save it into a file which I can burn to a disk which will play on my standard blu-ray player.  When I complete a video in the new iMovie and click on "Share" and select "file" is saves a file in my computer but the file will not play on the DVD.  How do you go from the compiled video in iMovie and get a burnable file which will play on the DVD? (If I click on this file to open it, it will not open.) Is there some other software which is necessary? Thank you for any suggestions?  I did download "Quicktime Player 7 Pro" into my utility folder, but I can't see how this helps.

    Top menu> imovie> preferences> General> Show advanced tools.

  • I have downloaded video to iPhotos but how do you get the video to iMovies

    I have downloaded video to iPhotos but how do you get the video to iMovies

    In iMovie look in the Event Library. You should see an Event named "iPhoto Videos" (assuming the videos are compatible with iMovie).
    Each time you open iMovie it will look for any new videos in iPhoto and place thumbnails in the iPhoto Videos Event. You will be given a choice as to whether you want the thumbnails generated now or later. The thumbnails will appear in chronological (date) order in the Event window. Note that the clips themselves are not actually imported to iMovie - they are simply referenced by iMovie (that is, iMovie points to the clips in iPhoto).
    Drag clips (or parts of clips) to a project. To start a new project, select File > New Project from iMovie's menu.
    Please ask if you need more advice. Otherwise, click on Help > iMovie Help in the menu. There you will find plenty of good information about how to use iMovie, including short video tutorials.
    John
    Message was edited by: John Cogdell

  • How do you insert special characters with imovie 08?

    How do you insert special characters into a project
    with imovie 08?

    Don't think that would work. Since my "system date" is already set at 2007. I have 2 imports, one has the year as 2048, and the other at 2016!! I don't know where they are getting these dates from, but they are not the system date.
    Were the files imported directly from a camcorder or from files already on your hard drive? In the first case the year may have been taken from the time "stamp" recorded when the footage was shot (which may or may not have been correctly set by the user). On the other hand, files imported from the hard drive seem to be keyed to the date the imported file is written to the "Events" folder which, of course, reflects the current system time/date setting. That's why I said you had to then import (re-import) the files from a hard drive source -- i.e., to ensure the DTG would be re-written.

  • How do you burn a dvd from imovie if computer does not have idvd anymore?

    How can I burn a dvd from imovie if this computer does not have idvd? is there anything in mountain lion that will allow this simple task to be completed.'
    When i try to finish a project in iphoto it wont even do that...can anyone help?

    Buy iDVD.
    Yes, there are other programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others.  None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
    http://www.apple.com/findouthow/movies/idvd.html
    With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
    IDVD is easy to get. It is available on disk as part of iLife 11.
    IDVD is a wonderful piece of software and well worth the low cost of $40.  (works with all Mac OS 10.5 and newer.)
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • How do you import youtube video to iMovie?

    How do you import youtube videos into iMovie

    Why not ask your questions in the iMovie forums?  It's where the iMovie users hang out at.

  • How do you create chapters in the iMovie version 10.0.3

    I've been unable to find how to create chapters in the new iMovie IOS since its had serveral updates from iMovie 11.
    I don't want to buy another movie creation program, but the new versions seem to have less and less movie edit/creation features.

    Hi doc - if you have installed iMovie 08, then you are entitled to download iMovie HD6 from here:
    http://support.apple.com/downloads/iMovieHD6
    Many people who are unhappy with 08 are using this instead.

  • How do you save your videos in iMovie to a different location on your computer?

    Since i upgraded to OSX Mavericks imovie keeps switching itself off when trying to export video to DVD.
    Genius Bar told me i need to save my videos first then delete imovie and then download imovie from the app store.
    How do i save my videos in imovie to a different location on my imac so i can then delete imovie????

    Copy the iMovie Library. It should be in YourUserFolder/Movies/iMovie Library. See iMovie (2013): Work with multiple libraries

  • How do you send more than 1 iMovie project to the same iDVD project???

    I have 3 separate movie projects in iMovie with chapter markers and am trying to send them over to ONE iDVD project. Every time I send a movie over, it creates a new iDVD project and I can't get all 3 movies in the same project.
    I'm trying to put each movies as a submenu under the main menu in iDVD.
    Any help would be appreciated!
    iMac G5   Mac OS X (10.4.8)  
    iMac G5   Mac OS X (10.4.8)  

    Thanks for the help Karsten...
    OK, after a long night of trial and error, I've figured it out...
    Issue 1: Files not showing up in the media pane--- miraculously after shutting down all open apps and then restarting the computer, my iMovie projects are now showing up in the movie pane of the media panel in iDVD...
    Issue 2: Getting more than one movie project into iDVD with all the chapter settings--- a little more complicated!
    In iMovie: SHARE > iDVD gives you a new iDVD project with 2 submenus: 1 with the entire movie, and 1 with "scene selections"
    If you try to add a second iMovie project to the same iDVD project; it's not possible from within iMovie (at least not that I can figure out!).
    You can add this second iMovie project to the same iDVD project by adding it to the project within iDVD from the MEDIA > MOVIES pane. This, however, will only add the movie and not give you the second submenu with scene selections.
    To get the 2nd iMovie project into iDVD, I dragged the 2nd movie project from a finder window into the opened iDVD project. This adds the 2 submenus (1 with the movie and 1 with the scene selections) to the iDVD project.
    Hope this is useful to someone else, too.
    Thanks!

Maybe you are looking for