How do you downgrade to version 6?

I upgraded to 7, but I don't like it. I'm thinking about downgrading, but I can't figure out how.
Windows XP
Windows XP

UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: Intel(R) 82845G/GL Graphics Controller\Intel(R) 82845G/GL Graphics Controller
IDE\DiskWDCWD800BB-53CAA1_____________________17.07W17, Bus Type ATA, Bus Address [0,0]
IDE\CdRomDVDRWIDE1008___________________________0052___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomMATSHITADVD-ROM_SR-8588________________7Z11___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: MATSHITA DVD-ROM SR-8588, Rev 7Z11
Drive is empty.
F: DVDRW IDE1008, Rev 0052
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 16 20 24 32.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive F: DVDRW IDE1008 on CDR media at speed 16X.

Similar Messages

Hi there, how do you downgrade to a previous iTunes version on a Mac?

Hi there, how do you downgrade to a previous iTunes version on a Mac?

What exactly do we repair permissions of inn disk utility?
OK. The easy explanation:
Mac OS X is a UNIX based operating system and like all other UNIX operating systems, its usage is controlled by permissions. Which user has some, all or no permission to read, write to and otherwise modify files and folders. Applications also have or do not have certain permissions.
In Mac OS X "Library" folder is a sub folder called "Receipts". When software is installed using Apple's Installer application it deposits a .pkg file in Receipts, containing information about the software and what it's permissions should be.
If for some reason those permissions are corrupted or changed to something they should not be, using Disk Utility to repair permissions compares what the current permissions are with the information contained in the .pkg files. Should Disk Utility find differences, it uses the information to correct those permissions.
Disk Utility does not repair permissions on applications that are installed via another routine, such as a custom installer or drag and drop. Neither does it repair permissions on any files or folders that you create.

How do you determine DSP version in an IOS

How do you determine DSP version in an IOS. I have a bug that says 'Downgrading DSPware to 4.4.12 or earlier resolves the echo issue.'
The bug ID is CSCsd54344.

I have a site with CME with similar static issues, they are running 12.3(8r)T7 with CM 3.2. The DSP version is:
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============
edsp 001 01 g711ulaw 0.1 IDLE 50/0/1.1
edsp 002 02 g711ulaw 0.1 IDLE 50/0/1.2
edsp 003 01 g711ulaw 0.1 busy 50/0/2.1
edsp 004 02 g711ulaw 0.1 IDLE 50/0/2.2
edsp 005 01 g711ulaw 0.1 IDLE 50/0/3.1
edsp 006 02 g711ulaw 0.1 IDLE 50/0/3.2
edsp 007 01 g711ulaw 0.1 IDLE 50/0/4.1
edsp 008 02 g729r8 p 0.1 IDLE 50/0/4.2
edsp 009 01 g711ulaw 0.1 IDLE 50/0/5.1
edsp 010 02 g729r8 p 0.1 IDLE 50/0/5.2
---------------------------FLEX VOICE CARD 0 ------------------------------
*DSP VOICE CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
*DSP SIGNALING CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
C5510 001 01 {flex} 4.4.705 alloc idle 0 0 0/0/0 02 0 47166/0
C5510 001 02 {flex} 4.4.705 alloc idle 0 0 0/0/1 06 0 11363/0
C5510 001 03 {flex} 4.4.705 alloc idle 0 0 0/0/2 10 0 1750/0
C5510 001 04 {flex} 4.4.705 alloc idle 0 0 0/0/3 14 0 557/0
C5510 001 05 {flex} 4.4.705 alloc idle 0 0 0/1/0 02 0 934/0
C5510 001 06 {flex} 4.4.705 alloc idle 0 0 0/1/1 06 0 731/0
C5510 001 07 {flex} 4.4.705 alloc idle 0 0 0/1/2 10 0 4837/0
C5510 001 08 {flex} 4.4.705 alloc idle 0 0 0/1/3 14 0 21514/0
------------------------END OF FLEX VOICE CARD 0 ----------------------------
Hmm, whay does it show 0.1 next to the edsp?
Chris

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

Downgrading isn't supported and wouldn't help. You need to fix your phone.
1. Delete and reinstall all email accounts.
2, Restore the phone in iTunes, first using a backup and if needed as a new phone.
iTunes: Restoring iOS software

After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). How can I downgrade to version 5?

I am using ArcGIS 10 and Firefox 6 on Windows XP.
After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). Any ideas of what could be causing this? I have also posted on the ArcGIS forum site for input from that side.
How can I downgrade to version 5? If that is the only option available.

Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas?

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

How do you see what version of PDK you are using?

how do you see what version of PDK you are using?
I'd like to know where I can look to see the full version number and understand what version I am on.

The Release Notes document (pdk.release.notes.html) contains the version information.
Tugdual Grall has a great blog on additional ways of specifying your PDK/OC4J versions.
Peter

How can you tell what version of Quicktime you have?

How do you determine what version of Quicktime you have on your computer? What version do you need for a new 30G Video iPod? How do you upgrade versions, if necessary?
Thanks in advance for any help.
iPod mini for windows Windows XP

Open a QT document and use the Help menu, where you should see an item labeled (I believe) About Quicktime Player. That should tell you the version running the player.
You need QT Pro and QT 7 to have a preset for iPod video. You probably can use QT 6 if you use these settings in making an mpeg-4 video:
"MPEG-4 video: up to 2.5 mbps, 480x480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats<<
QT 7 is available for download from the Apple site by clicking on
"Quicktime" in the Purple banner above

How do you know the version of a JAR file ?

how do you know the version of a JAR file ?
is it what is written on MANIFEST.MF ?
for example i have a JAR file
whose MANIFEST.MF has this
Manifest-Version: 1.0
Created-By: Ant 1.4.1so, whats the version of this JAR ? 1.0 ?

anyway, that was JSTL..jar.
Now, come to another JAR file....
whose MANIFEST.MF has......
Manifest-Version: 1.0
Created-By: Apache Ant 1.5.1
Extension-Name: Struts Framework
Specification-Title: Struts Framework
Specification-Vendor: Apache Software Foundation
Specification-Version: 1.1
Implementation-Title: Struts Framework
Implementation-Vendor: Apache Software Foundation
Implementation-Vendor-Id: org.apache
Implementation-Version: 1.1
Class-Path: commons-beanutils.jar commons-collections.jar commons-dig
ester.jar commons-logging.jar commons-validator.jar jakarta-oro.jar s
truts-legacy.jarso, How do you believe whats the version now ? do u go with the comment "Manifest-Version: 1.0" or "Specification-Version: 1.1" ?
definitely, you would go with the "Specification-Version: 1.1" and declare this JAR as STRUTS 1.1
hmmm, so, if nothing is mentioned like above should we follow the MANIFEST version as the JSTL version ? in my earlier example i did not find any comment on ""Specification-Version" ......so , if anybody gives me that JAR , how do i decide whether its 1.0 specification or 1.1 specifucation compliant ?
can you tell whats the JSTL version of my earler example JAR file ?

How do you know what version of OS X you have on your Mac Mini?

How do you know what version of OS X you have on your Mac Mini?

Apple Menu (upper left on meu bar) > About This Mac
"Verion: " 10.8.x is Mountain Lion, 10.7.x is Lion, 10.9.x is Mavericks, 10.6 x is Snow Leopard.

TS4009 How do you downgrade to the free option or get refund? After selecting free the done button can not be pressed.

How do you downgrade to the free option or get refund? After selecting free the done button can not be pressed.

Refund:
If in the US, follow the link below (you must request a refund within 15 days) -
https://discussions.apple.com/message/16968425#16968425
it gives the USA phone number - if you don't live there you will have to find an equivalent number from the 'Contact Us' link at bottom right of this page.
Keeping current plan, but downgrading when it ends:
Settings>icloud>Storage & Backup>Change Storage Plan. Look at downgrade options. There you can choose the plan you want when the current one ends.

How do you downgrade to iOS 6

How do you downgrade to iOS 6?

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

How do you uninstall older versions of labview

How do you uninstall older versions of labview and all their components, registries etc?
Solved!
Go to Solution.

If you're looking to get a more through uninstall, then Revo Uninstaller is a good way to go. That will run the regular NI uninstallers and then search for leftover registry entries and files. You can also use MSI Blast.

How do you recover previous versions of a excel document, please?

how do you recover previous versions of a excel document, please?

Hi kappy,
I have have gone to Home/Library/Applications Support/Microsoft/but then it doesn't show office for some reason even though it is installed on my lap top? I'm panicking as its all my businesses accounts

How do you downgrade to version 6?

Similar Messages

Maybe you are looking for