How do you edit date/time title slide???

I've used date/time title slides in my movie, but I can't edit the date/time. I want the time of the clip, instead it just shows the date/time I inserted the title into the movie. On other title slides, you just click on the info to edit but it doesn't seem to work???
Thanks

It will pick up the metadata from the clip.
So the first thing to check is whether your clip has metadata. Click VIEW/PLAYHEAD INFO and skim your mouse over the clip. Do you see any data and time info?
You can add date and time info in iMovie by right-clicking on the Event clip and editing the date and time. i am not sure if this will populate the title, but it might. In older versions of iMovie, it would not.
A better solution (assuming you know the date and time) is to select that clip in the Event.
Then right-click on the clip and select Reveal in Finder.
In the Finder, right-click/COPY. Go to your desktop and right-click PASTE. On this copy of the clip, change the name of the clip to clip-yyyy-mm-dd hh;mm;ss;ext where hh is hours in 24 hour time, ext is the current extension, and the rest should be self explanatory.
Once you have done this, import it into iMovie using FILE/IMPORT/MOVIES...
It is OK to import it into the same Event.
Now it should have the correct date and time metadata.

Similar Messages

  • How do you edit the event title after importing?

    I still have not figured this one out. It's not double click, not control click, not command click, not the "info" or "edit" buttons. What is it?
    I am also frustrated with merging and splitting events after import. I am now doing all that in the finder before I import. What a pain! Any tips?

    I don't like iPhoto '11 either.
    1. I can't change the name of the multiple events in the import window as it was possible in earier versions of iPhoto.
    2. It is not possible to merge events anymore in the import window.
    3. When I get back to the Events view directly after importing new pictures, the most recently added events do not show up.
    4. Worse, multiple earlier events seem to have disappeared all together.
    5. When quitting iPhoto, I get the message 'updating library'. After restarting iPhoto, the recently added events do show up without a name but just with a date. Then I can rename and merge these events. The events that had disappeared do show up again.
    All together, this feels like a very crappy and cumbersome upgrade...
    How do I get the correct functionality back, apart from downgrading to an earlier version of iPhoto?

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • Problem with Date / Time Title - Showing Inacurate Information

    I use iMovie to make videos for my job. The videos need to have an accurate running time and date displayed on them. I use the "Date/Time" Title option and the running time and date appear on the video. BUT- there is a problem. The time is wrong.
    When I import a video clip (from my Panasonic HDC-TM80) into iMovie, I can see the "time and date created" as well as the "length" of the video clip. The time and date created shows the time and date of when the clip ENDS. When I overlay the "Date/Time" Title, it starts the time (at the beginning of the clip) from the created time (which is actually the end).
    Example:
    Clip Created (end of clip): 3/23/11 10:30:00am
    Length of clip: 12 min. 35 sec.
    The actual Date/Time Title should show 10:17:25am at the beginning and runs through 10:30:00am (the end).
    But instead it shows 10:30:00am at the beginning and runs through 10:42:35am. This obviously results in a 12 min. 35 sec. inaccuracy.
    Is this a problem with the software? Is there a way to contact someone to alert them of this problem? Or am I missing something simple?
    Thanks in advance for anyone's help.
    -as a quick fix, I adjusted the time and date on the video clips so that it would show the correct info, but I'm usually working with several clips at a time and it is laborious to change each one.

    I don't have an answer but was wondering how you like the TM80? Except for the date/time issue, is it compatible with iMovie'11?
    Thanks!

  • How can I display date+time and not the point number in excell?

    Hi everyone,
    Could anybody tell me how I can save date + time to a file, so that  I can display on a diagram(excel) : date+time in (ox) and data (oy)? :
    My program sets in (ox) the point number and not the date+time....( although  date and time are written correctly in the column...)
    Any help would be great,
    Thanks,
    regards,
    Marc

    hi there,
    excel uses 01.01.1900 00:00 as the time offset, LabVIEW uses 01.01.1904 02:00, so you can't display the correct datetime in excel when you write the time as a fractional number of seconds from LabVIEW. you must format the datetime in LabVIEW to a string and write that to the column. use the "Format Date/Time String" - function and for example "%d.%m.%Y %H:%M:%S%3u" as the format string (see the functions help for more examples). you also could format your data to a string using "Format Into String" - function and write the file as a 2D string array. the decimal point you have to use depends on your system and its settings, but you can specify the decimal point in the Format string like "%.;%f" (means fractional number with point as decimal point).
    best regards
    chris 
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • How to dispaly System date time on Jsff page ?

    Friends,
    It would be simple question for you , Any one has idea about
    How to dispaly System date time on Jsff page using any expression laungage ?
    Thanks in Advance

    Hi,
    I have a solution for you I hope that is helps.
    add this to the top of your page...
    <jsp:useBean id="now" class="java.util.Date" scope="request" />
    so, you want the current date?
    <af:outputText value="#{now}"/>
    you can use the format for date also.
    I hope it is what you want.

  • How do you change the time of day presets in ical?

    How do you change the time of day presets in ical?  I would like them to be only 1 hour difference, with the preset start times of 10:00 am and end time of 6:00 pm, if I have anything starting after 4:00 pm it also changes the date to the next day.  Incredibly annoying!

    Hi there jenni6,
    It looks like this is possible in the Calender prefernces. Take a look at the article below for more infromation.
    Calendar (Mavericks): General preferences
    http://support.apple.com/kb/PH14994
    -Griff W.

  • How can I stamp date & time

    Hello,
    How can I stamp date&time on my photos which taken by my iphone 4
    Regards
    Yasser

    Easy - if it is on the photo and you can see it then it is on the photo and
    You can not [remove it] - you can sort of obscure it using the retouch in iPhoto and if you have PhotoShop or PhotoShop elements the clone tool will do a better job
    It is part of the photo and there is nothind "behind" it to show - in the future do not set your camera to include it
    The EXIF data ia internal to the photo and is never shown on the photo - it can ony be seen using special software that understands it and then it is displayed seperate form the photo never on the photo - like the info pane in iPhoto which shows selected EXIF information
    LN

  • Date/Time title

    How can I change the date and time when I put the date/time title alone. I put it right after the whole movie

    The Title-Safe area is also called the TV Safe area by Apple. In researching my issue, I found a support article on Apple's website regarding iMovie '08 having a similar problem with titles not fitting within the TV safe area when burned to DVD. Of course, this does not apply to the Date/Time Title in iMovie '09. Here's why: This article's advice to avoid such clipping is to use short titles that are centered in the video clip and to select the 'Show Fonts' button in the Preview window and change the left/right justified title to a centered title. Also, it says to avoid using subtitles to prevent clipping at the lower part of the TV screen. In iMovie '09, I don't see any sort of controls in the Date/Time Title to center the title, change the font, or make it not appear as a subtitle. Here's the link to the article:
    http://support.apple.com/kb/TS1004

  • How do you download data from your macbook to the ipad?

    how do you transfer data from your macbook to the ipad?

    What data do you want to transfer ? Music, films, tv shows, photos and ibooks are done by syncing in iTunes (for which there is some help in the iPad manual which can be downloaded from here http://support.apple.com/manuals/#ipad). Documents can also be done via iTunes, but it depends upon the app and the transfer method(s) that it supports e.g. file sharing via the bottom of the device's apps tab on your computer's iTunes, via your wifi network, cloud services, email attachments etc
    Edit : have you got the Keynote app on your iPad, or any other app that supports keynote presentations ? Without a 'suporting' app you can't store a document/file on the iPad (unlike computers files have to be stored within an app)..
    Message was edited by: King_Penguin

  • How do you return System Time of the local box in FTP command

    How do you return System Time of the local box in FTP command... since I want to output the system time of my local box copying to the FTP server...

    Its asking me to enter a new date... I actually want to return it into a log file since I am using ws_ftp.... but the log files dont have any date time being returned... i just want to be able to echo that date time into the log file... but it doesnt do that... I also tried
    SHELL ECHO %DATE% %TIME%
    but it returns this in the log file
    Processing Line 10 [SHELL ECHO %DATE% %TIME]
    I also tried in my ws_ftp script and it says:
    Processing Line 15 [!Date]
    Sending command [!Date] with parameter []
    !Date
    500 '!DATE': command not understood
    Failure in command [!Date]

  • How Do I  Edit Keywords, Description, Title

    How Do I Edit Keywords, Description, Title Dreamweaver 8? In
    my usual web building software, all I need to do is click page
    properties and there are fields to enter the metas... Where do I
    find this feature.

    > Strange indeed.
    Why?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "DJ Website Designer" <[email protected]>
    wrote in message
    news:flgsnu$6j5$[email protected]..
    >I found it. I had to change to tab view, then went to
    "favorites" and then
    >add
    > the keyword and description elements to the toolbar. The
    Page Title shows
    > automatically at the top of the page, in a field next to
    the 3 view
    > buttons....
    > Strange indeed.
    >

  • How do you edit text that is in a text box?

    How do you edit text that is in a text box?  I just want to change the font color of the text.  Solution in the Help files recommends selecting the text and then selecting Optional) To make further changes to the text box:
       Using the Select tool or the Text Box tool, click an edge of the text box to select it, and then drag a corner to resize it. Use the Properties toolbar to change the border and fill options.
       Double-click the text box to edit the text or change the text attributes. Drag across text to select it, and then select options from the Properties toolbar.
    This is what the help files recommend
    (Optional) To make further changes to the text box:
       Using the Select tool or the Text Box tool, click an edge of the text box to select it, and then drag a corner to resize it. Use the Properties toolbar to change the border and fill options.
       Double-click the text box to edit the text or change the text attributes. Drag across text to select it, and then select options from the Properties toolbar.
    When I try the above solution I don't have a  "Options" in the "Properties" toolbar.
    Why would they change a process that was so simple in previous editions to such a hidden awkward process?

    Try with a Brightness/Contrast adjustment layer and/or changing the blending mode.
    If the effect is too much for the rest of the bulb, you may be able to mask it out.
    It would help if you post a representative picture here on the forum page for us to look at.

  • How can you transfer data from one ipod to another ?

    How can you transfer data from one ipod to another ipod ?

    The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device."  Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

  • How do you import data base dmp file in oracle 10g

    How do you run data base dmp file in oracle 10g

    Examples..
    Table Exports/Imports
    The TABLES parameter is used to specify the tables that are to be exported. The following is an example of the table export and import syntax:
    expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
    impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
    For example output files see expdpEMP_DEPT.log and impdpEMP_DEPT.log.
    The TABLE_EXISTS_ACTION=APPEND parameter allows data to be imported into existing tables.
    Schema Exports/Imports
    The OWNER parameter of exp has been replaced by the SCHEMAS parameter which is used to specify the schemas to be exported. The following is an example of the schema export and import syntax:
    expdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=expdpSCOTT.log
    impdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=impdpSCOTT.log
    For example output files see expdpSCOTT.log and impdpSCOTT.log.
    Database Exports/Imports
    The FULL parameter indicates that a complete database export is required. The following is an example of the full database export and import syntax:
    expdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=expdpDB10G.log
    impdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=impdpDB10G.log

Maybe you are looking for