How do you email project to garage band user

how do you email project to garage band user

Christoph Drösser wrote:
Please don't post the same question twice!
Whoa... Have many friends?
RagingMoon wrote:
what i meant here was editable file for collaboration as opposed to finished product so i don't think it is the same question
Google 'Free File Share'
one example is http://www.mediafire.com/ These sorts of services are free but can cap the file size. Media Fire limit there free service to 200mb. Depending on the size of your project you may have to upgrade to paid services.

Similar Messages

  • While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

    While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
    Any ideas why? and how to get my tracks back?
    I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
    I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
    The 2 songs having the issue are titled Exotic Yearning and Reunion.
    I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
    Any thoughts and help would be greatly appreciated!
    Thanks!

    After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
    It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
    Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
    Very Frusterated...:(

  • Open imovie project in garage band

    Hi,
    I am trying to do mulitiple tracks in imovie, with music, voice-over, etc. and I want to hear my voice-over at the same time as the music, to match timing.This is not possibe via imovie, as one's voice-over obscures everything else, so the timing with the music is out.
    I thought that I could export the imovie project to garage band, synch the music and voice-over and send it back.
    I "shared" the imovie project to the media browser,
    now what? Where did it go?
    Can I in fact use garage band in the manner I have described above?
    Can't get any joy from the garage band help.
    Any ideas welcome.
    Thanks.

    Can I in fact use garage band in the manner I have described above?
    Sure, you can!
    To use the movie in GarageBand, click the MediaBrowser icon in the lower right corner of the GaragBand window. Click the "Movies" tab and click disclosure triangle beside the iMovie icon. Now you should see your project.
    Select it. Inthe lower part of the Media Browser you see the different sizes of your movie. Select on of them and drag them to the time line.
    If your movie has an Audio track you will here it when you play your song and you should be able to play or sing  along with the Movie-audio track and record your vocals. Then I would export the vocal track and import it to iMovie and mix the two tracks in iMovie.
    Regards
    Léonie

  • How do you export projects to iDVD in the latest iMovie version?

    How do you export projects to iDVD from the latest iMovie version?  (It used to be a simple click on share!!)

    You need to "Share to file" and pick the 480 or 540 size.
    Use this file with iDVD.

  • How do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    how do you email contents of favorites folder without having to copy and paste each item in the folder individually?

    Zip (compress) the folder before you send it.

  • How do you email poll results?

    How do you email poll results?

    sorry about the typo error on the p.s
    i have attached my vi with an excel file with my measurements i am talking about.the first column goes from segment 1-35 while the second column goes from 1-42.
    i want to compare these 2 columns on the same time axis
    Attachments:
    segment analysis.xls ‏24 KB
    Testing Cepstrum Algo.vi.vi ‏201 KB

  • How do you share Aperture file across multiple users on same Mac?

    How do you share Aperture file across multiple users on same Mac? Seems this should be a preferences choice.

    When you share your library between users, you may run into permission and ownership problems, if both users are editing the Aperture library and not only reading it. To avoid that, it helps to put the Aperture library onto a separate disk or a separate partion of your hard drive. For s separate partition or disk you can enable the "ignore ownership on this volume" flag. Then all users can access the library as owners of this library.
    You might try to put the aperture library into a shared folder on your mac, but that has caused problems recently, i.e. when the library also contains video files.
    Regards
    Léonie

  • How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    See Terence Devlin's thorough explanation here.

  • How do you save "game state" so the user can continue next time?

    I'm not sure what the correct game terminology is for this, but how do you save "game state" so the user can continue next time?
    This seems like a pretty important feature for building some games, we don't want users to have to start over everytime.
    Any ideas if this is possible?

    Check out my blog post on the PersistenceManager:
    http://www.unitedmindset.com/jonbcampos/2010/11/01/flex-4-5-persistencemanager/
    This will help you understand how to store the data. When the app starts up again get the state information from the persistencemanager and reset you game to the state you need. It requires a bit of code for the startup, but it is relatively simple.

  • How to import midi files into garage band for ipad

    I have the newest iPad and installed Garage Band.  I don't have a MAC computer, only Windows machines.  I want to use the iPad to send the midi files to a Roland 150 keyboard to make it play the music.  Is this even possible?  The Roland has Midi In and Out ports and I have the camera adapter kit and a Yamaha UX16 USB to Midi cable.

    You cannot export midi files from GarageBand, sorry. You can only share audio files in aac-format or GarageBand project files, and both are not midi. See what is currently supported: http://help.apple.com/garageband/ipad/1.2/index.html#chsec12c387
    Regards
    Léonie

  • How do I get removed from garage band community?

    When I started using garage band I signed up for the Apple Community. My mailbox is full of hundreds of posts from the community. The more I delete the more come in. I have rechecked all the settings for privacy. Can anyone help me stop the influx of email?.

    Have you also turned off the Notifications on this page (upper right corner?). You need to make all these steps:
    Go to your profile page.
    Select the Notifications tab clear out anything that shows there.
    Go back to your profile
    In the Actions box select Preferences
    Select the Email Notifications Preferences tab
    Set the values as you like
    Go back to your profile
    In the Actions box select Manage Email Notifications
    delete any that show
    Regards
    Léonie

  • How can i export music from garage band to my PC?

    Hi,
    Ive read quit a few threads on this matter, but none of the ideas seem to work.
    I have created a track in GB and i now want to listen to it on my PC.
    The ipad (1st edition) and is syncing up to the PC fine apart from this.
    The process that im following is:-
    Create the song in GB
    Tap ' My Songs' at the top left hand side of the page
    Hit the 'send to itunes' button at the bottom left of the page
    Choose 'AAC Format'
    But when I fire up ITunes (on my PC) , click 'Apps' and then scroll to the bottom, i can see the Garage Band application Icon, but there is no exported music file.  Im not sure where to look next.
    Any ideas would be greatly appreciated.
    Mike

    Yes, no problem, as long as Logic has a equal or higher version. So, Garageband 9 -> Logic 8 will produce problems. With Logic 9, you can import everything and open the GB file directly in Logic.
    Fox

  • I'm Just wondering how to make drum beats in garage band using the sounds it comes with? Also how can i use garage band like a drum machine which i can program an entire song part by part????

    I'm new to using Garageband and loops with garage band. I just wanted to see if there was a way for me to use the drum sounds provided in garageband to create my own original drum tracks and work with it like a drum machine that i can program an entire song into... any info or tutorials would be a great help.. Thanks!!!

    Ah ok, I have a better idea of what you want to do now. 
    Unfortunately there isn't anything inside GB that can come anywhere close to Acoustica Beatcraft, but there are two tools inside Garageband that can help you do something similar. 
    First are the built-in keyboards, which will enable you to trigger drum samples with your computer keyboard or mouse.  Go to Window -> Keyboard or Window -> Musical Typing.  Click with your mouse on the Keyboard or press keys on your computer keyboard with Musical Typing, and you will trigger different drum samples for whatever kit you've chosen for that software track.
    Next is the Track Editor: in Piano Roll mode, you can create and see midi notes somewhat similar to the view in this screenshot from AB.  On the left side of the Editor, you will see a sideways piano keyboard.  When you assign a drum kit to a software track, each of the piano keys corresponds to a different instrument: hi hat, snare, bass drum, etc---you'll have to play them using the on-screen keyboard or musical typing to see what they correspond to.   In order to add a MIDI note you hold the CMD button and click with the mouse. 
    So, if you wanted to add a closed hi-hat hit, you would CMD-click on the Track Editor row corresponding to the closed hi-hat piano key, and then you can drag the MIDI note left & right to change the beat it plays on, or resize the note, which will change its duration.
    Or, as you've already observed, you can use Musical Typing to play out a pattern on your computer keyboard while recording, and you will see the midi notes appear in real time in the Track Editor.
    Hope this helps, feel free to ask more questions.

  • How do you use projects?

    I am an old hand at LabVIEW, but new to LabVIEW projects.
    I've used projects in other languages, and understand them fine.
    But I'm having real trouble making LV projects work FOR me.
    The ONE good thing I found is that I can place a VI into the HOST target or the PXI target, and LV knows to run it on the host, or run it on the PXI,
    Great.
    Beyond that, what do they do FOR you?
    If I double click on my main LLB file, the LOADING box comes up after about 420 VIs, and shows progress up to about 950, then PRESTO, my main window is there, ready to go.
    If the PROJECT that contains this VI is open, though, after the LOADING is done, I get 10-12 seconds of an empty window frame (the size and title of my main VI), before it draws the front panel and is ready.
    If that's a benefit, then somebody explain it to me, because I just don't get it.
    If I drag an LLB into the project, I don't understand what happens. I get a FOLDER with the current CONTENTS of the LLB in it. But if I put something new into the LLB, it does NOT show up in the project folder for that LLB. Isn't it obvious that I want to put the whole library into the project?
    If my MAIN vi is in the project, and it calls subVIs A,B, and C, what benefit is there to putting "A" into the project, versus leaving it out? Everything still works, as far as I can tell.
    In what circumstances should I leave OUT subVI "A"?
    Do I have to put all 950+ VIs into the project to enjoy a benefit? Since it's unable to follow libraries properly, that becomes a giant PITA.
    Basically, how do you make them work FOR you?
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

    I'm quite a fan of the project (maybe because I naive (?) thought if NI thinks we need it, I'll probably need it)
    The shift you have to make to embrace the project is that it is a storage room for everything related to your code. It's not a mirror of your desktop (for that we have explorer).
    Just like every new feature it has its bugs....
    One of the things I love, is the ability to have one installer for several executables!
    The ability to have good tweakable bld file for distributions, easily adjust external routines for different tasks.
    The project itself is quite accesible from within LV, the only thing I miss is  a 'get current project' method for VIs, but I can see why this is not available.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • How to create a mix in garage band from itunes songs on an Ipad?

    I am getting married in August and want to do a fun mix of good hits to dance too.
    My ultimate goal is to take 6-7 songs and just choose snippets from them and form a single song.
    I have the songs on the Itunes on my IPAD but every time I open Garage Band I have to choose keyboard..guitar..etc. and when I try to upload things from Itunes it says it can't read any.
    Can anyone give me simple help so I can get my song put together? Thank you!

    Hi thanks for that!
    It works as desired on the report.
    What I'm basically trying to do on the form is concatenate all the data the user has selected in the given columns and then store that value in a column on a table.
    So, ideally, after the customer hits submit, the column with the concatenated data should be in the table in the database.
    When applying a computation to the column it seems to only return the :P1_COL1 ||'_'|| etc...... query.
    Any ideas on this query?
    Thanks for the help! :D

Maybe you are looking for