How do you embed a Flash video into a Flash form

I am trying to embed a Flash video into a Flash form but the
form displays just fine however the video does not. I have tested
the Flash video with out the Flash form and works fine.

Take a look at CF_PIM
loading
swf files in flash cfforms

Similar Messages

How do I embed a youtube video in a flash web page?

I am attempting to embed a youtube video in a flash web page I created. I have been able to do this in html on static sites and thought I might be able to do the same in flash. Can anyone walk me thru the steps to do this?

Thank you Rob,
I am VERY new to actionscript and have an additional question:
I saw this in the beginning notes of the document link you sent me:
Use the following URL to load the chromeless player into your
application and build your own custom controls in Flash:
http://www.youtube.com/apiplayer?version=3
how do I do this? Do I do this in actionscript (how) or the import
feature?
Any additional assistance you give me will be greatly appreciated
Seta Majkia
Kemitemultimedia
www.kemitesound.com
[email protected]

How do I load photos and video into existing flash

Hi,
I can work with graphics and timeline keyframes but I'm
generally clueless about scripting.
I have a page:
http://www.harmoniccycle.com/hc/swf/IMBA/pineyZ/PINEY_Z.html
that I've prepared with 3 button instances in anticipation of
loading either one of 2 photos or a video clip into a upper level
I am terrible with the loadmovie syntax, and have tried
loading the photos with a onrelease load movie script but keep
getting error reports.
I am also unclear as how best to unload the photos or video
to get back to the lowest level timeline.
I have Flash 8.
I see you can load jpegs or .swf but t seems if I can learn
to load .swfs I could then use the same load/unload solution to
load either my photos (whcih I guess I would *embed* in a .swf) or
the flash video (also as a .swf)
thanks for any help you can offer,
Mike McCue

http://community.sony.com/t5/Cybershot-Cameras/Can-I-Change-Folder-Structure-on-Sony-DSC-WX50/m-p/57317#U57317
KimberleyS's response may help
Also make sure your folder structure in the camera is on Standard and not by Date

How do I embed a small video into a larger video screen?

Adobe Premier Elements 10 for a MacBook Pro Mountain Lion OS 10.8.5
For my ski club, I'm making a short single 3 min video with footage from 3 different camera's. The video frames from one camera are 320 px by 280 px and the frames from the other two cameras are 640 px by 480 px and when shown full screen on a monitor, the footage from the two 640 px by 480 px cameras look OK (if not great) but the footage from the 320 px by 280 px is obviously grainy. I would like to embed the smaller into the larger at 50% so that the picture will be sharper, even though just filling up half the screen. Help please. This is for the upcoming ski show and I need it by Sunday, Oct 20. Thanks. DRThiess

DRthiess
With your Premiere Elements 10 Mac,
a. have you set your project preset for NTSC DV Standard
b. have you imported your 640 x 480 video into this NTSC DV Standard project via Get Media/Files and Folders and now have it on Video track 1.
c. have you then imported your 320 x 280 into this same project and placed it on Video track 2 above the Video track 1 content
d. have you then scaled the selected 320 x 280 on Video Track 2 using either
....Properties Palette/Motion Panel expanded and its Scale slider (check mark next to Constrain Proportions)
or
....Click on Monitor to bring up the bound box of the image and then clicking and dragging on one of the handles of the bounding box to scale the image
There are also some PiPs (Picture in Picture Effects) under Edit Header/Presets that you might want to explore. They are for 25% and 40%, but are adjustable.
Please let us know if any of the above worked for you or if you need supplemental information.
Thank you.
ATR

How do you embed/inject xmp metadata into a mpeg 2 video file?

Im looking to add keywords and descriptions to original file (raw MPEG-2) and have the metadata stick when i go to the transcoding process and batch convert the orginal file to either a wmv and flash file. how can i achive this? what tools are available ? and or is this a custom job? any info and or programmers looking to test this im open to all the help i can get.

Yeah I kind of figured that. I've been trying various ways of trying to batch inject metadata into video files and thought I would start with the master file but because of the limitations the raw digitized mpg 2 video file has. In that case I have yet to find a transcoding program that will batch out various formats and read a xmp side car file to inject the metadata into the outputted file (does anyone know if Adobe media encoder 4 can accomplish this where a xmp sidecar file is created then transcoding into a wmv and or flash file , curious if the metadata will stick and be read in the outputted file) In anycase I may have find an alternative way and use my current Rhozet carbon coder transcoder program to try to inject an xml file during the batch transcoding process. If anyone has successfully accomplished this with injecting xmp metadata in a batch transcoding program please let me know. I've been exhausted searching for the solution this problem for a long time and I don’t want to wait till a mpeg 7 solution comes out.

How do you add a small video into the Presenter Panel on the top right

I'm using Presenter 7.01
I cannot seem to add a video of a taking head to the Presenter Panel.
I can add video to the main slide no problem but there does not seem to be any option to add video to the top right panel and then display a presentation slide for the duration of the video.
If I go into the Slide Properties, and click on the Slide, the Edit button stays greyed out. I can only get the Edit button when I choose multiple slides, but then the options are limited.
Any ideas please?
Cheers

Adding THV is now done using 'Import Video' dialog. There is a small set of radio button to specify if you want the video on slide or on the the sidebar (top-left).

How do you put a youtube video into keynotes

Hi,
I'm doing a presentation using Keynotes and would like to put some you tube videos in it. How do I do that. I've searched in google, but can't find a method that works.

Here's what I just did, and it works:
1. Open Firefox, which already had DownloadHelper installed, went to youtube, tried to DL a video, didn't work. Strange, because I'm sure I'd DL'd youtube videos that way before.
2. Looked around on Firefox's site for other add-ons, and found *1-click YouTube Video Downloader 1.3*, DL'd and installed it, and read the directions.
3. Back to YouTube, clicked on a video, clicked on MP4 (immediately under the video window, on the right). The video DL'd with no problem.
So now I had this MP4 file on my Mac.
4. Opened KN, made a new test file, on the second slide: +Insert > Choose+, navigated to the MP4 file and inserted it.
5. In Inspector, I tried 2 different settings, one to start the video automatically after transition, the other to start on click. Both work fine.

How do you put mpeg type videos into i tunes???

Hi. I have windows XP as well as iTunes 6.0. However I have some videos in mpeg format that I would like to put onto my iPod video. The problem is that I can't get them in to iTunes. If anyone can help me solve this problem I would really apreciate the help.
Also if anyone knows how to convert midi files to AAC format that would be helpful. I use to be able to but now whenever I try it gives me a message that says "an unkown error occured {-50)".
Thanks

hmm. get a file converter like audioconverter. i'd suggest going to a torrent site, like torrentz.com, and searching for "audio converter." if you have a bittorrent downloader, download the file with "crack" in the name, so that the bastards who made audio converter wont take the program away from you after 30 trial days. if you don't have a bittorrent downloader, google search azureus, download that, and then you should be able to download the cracked audio converter. follow it's instructions to un-trail-period it, and then use the program. odds are, you'll try to convert the file and it'll say it failed to convert because. ask for details and it'll take you to some site where you can download additions to the file converter, so you can, finally, convert mpeg movies. and midi, and all that.

How do you drop a still photo into a video?

how do you drop a still photo into a video -- while continuing the audio track unchanded?

by popular demand, Kelli Applies Lip Liner to Audrey's Lips has been completely re-mastered. (ok, it was just one person who asked, but she's a very intelligent and articulate observer of such matters. she noted that the clip suggests "interesting possibilities", but that men probably would be unaware of that. i explained that "men are pretty simple, so we don't see too many moves ahead." she laughed.)
i believe that in an earlier post i indicated that in the re-mastered version i would delete the in-camera audio and dub in the audio from the Zoom H4n audio recorder. this i did.
(syncing the video and audio continues to be a nightmare, though ).
besides signifcantly improving the sound quality, using a separately recorded audio source allowed me to drop (2) still photos into the video track, and still preserve the continuity of the recorded conversation.
dropping in the stills the correct way (unlike in the first re-mastered video) was easier than i thought it would be. it's just a matter of dragging the Premiere Elements 7's red vertical timeline-cursor to the point on the timeline where you want the insert to begin, and then dragging and dropping the still photo alongside the red cursor. the amount of time the still will appear can be shortened or lengthened by dragging with the mouse -- the same way any other file can be extended or contracted.
the video coming out from the still was now running behind the soundtrack. but, the timeline shows the exact duration of the still, so the video coming out was shortened with the mouse by that same duration, and then the audio and video were back in sync.
to add the "sound effect" of the camera's shutter clicking (actually its mirror slapping) before each still appears, i found a point on the audio recording that had the click of my camera actually taking a still, and that had only a little audio from the models underneath it. removing all the audio before and after the sound of the camera click was, again, just a matter of finding the start/stop points i wanted, moving the timeline's red cursor to those points, and using the mouse to drag the ends of the audio file alongside the cursor.
because i wanted the sound of the camera click to merge with the converation anyway, i just put the audio file of the click on its own audio track (which allowed me to separately control its volume).
however, when i tried to copy and paste the audio file of the camera click to the beginning of the second still photo, i was not able to copy and paste by the normal method of using the mouse to right-click-file/left-click-"copy"/left-click-"paste". eventually, i tried doing so by clicking on "edit" on the menu bar at the upper left and then clicking on "copy" and "paste", and there was no problem. (go figure.)
as with the other re-mastered video, i brightened, increased contrast, made the hue a bit warmer, and added a little sharpening. (this has to be done individually for each separate video file that makes up the whole piece -- at least that's what i did.)
interestingly, the audio level can be tweaked directly on the timeline by using the mouse to drag up or down a horizontal yellow line running the length of the audio file.
i again rendered in Adobe Flash Video (.flv). (annoyingly, in XP at least, there's a default download destination that has to be reset everytime you want to save in a different location). from a drop-down menu i selected "NTSC Flash Video 700k" (just in case) and left the file name as "Untitled" (since no matter what i change it to, it saves as "untitled.flv", so i have to rename it anyway once it's saved).
i went into "Advanced..." and, to preserve the dimensions and the HD, i unchecked "Resize Video", chose "Same as source" for the frame rate, and checked 2 "Encoding Passes" (just in case).
for some reason, everytime i click the "save" button, it asks what i want to call these settings. if i use the name i used for the same settings on the previous go-round, it says that that name is already used and (impliedly) can't be used again. so, i add the new date, and yet another name for the same settings gets added to the drop-down menu (odd).
once the compressed .flv file was saved, it was an easy upload to youtube.
btw, it seems that the Elements 7's Audio Mix defaults to 0 dB, OR whatever the setting was in the prior saved version, unless i use the mouse to continuously "ride the slider pot". that's ok for a 48-second video, but does anyone know of a way the dB can be set so that it just sits there, instead of moving back to where it previously was

How to embed a mp4 video into a pdf with acrobat pro XI?

I'm trying to embed a mp4 video into a pdf using Acrobat Pro XI. When I try to play the video, all I see is a black box. The video is H.264 codec. I've tried on a PC and Mac and get the same results.

Video playback in the Acrobat Family uses Flash Player, so if it works in FP (loaded via an HTML page) then it should work in your PDF. First suggestion is to use the free MediaInfo tool to check exactly what the internal structure reports as.

How do you imort a .vob video format into I photo or I movie?

How do you imort a .vob video format into I photo or I movie? I tsays it is not a readable format. can that be changed?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Help inserting a flash video into my web page

Hello!
I'd love some help inserting a flash video into my web page. My web page is hosted by Viviti, templated, and edited online. I can add html to it, and I have the html source for my flash video. I also have uploaded the flash file to the server. Since I am very html illiterate, though, I need some help rewriting the html script so it can be published. There are two problems- firstly, no 'headers' or 'body' allowed in the script- these are already a part of the template. Secondly, I don't know how to rewrite it to refer to the uploaded files. It's also imperative that the full screen mode functions. I've pasted the source code for the flash video here. Please help!!!
Thanks!
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Drag and drop labelling</title>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">



<script language="JavaScript" type="text/javascript">
     AC_FL_RunContent(
          'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0',
          'width', '720',
          'height', '440',
          'src', 'Drag and drop labelling',
          'quality', 'medium',
          'pluginspage', 'http://www.adobe.com/go/getflashplayer',
          'align', 'middle',
          'play', 'true',
          'loop', 'true',
          'scale', 'showall',
          'wmode', 'window',
          'devicefont', 'false',
          'id', 'Drag and drop labelling',
          'bgcolor', '#ffffff',
          'name', 'Drag and drop labelling',
          'menu', 'true',
          'allowFullScreen', 'true',
          'allowScriptAccess','sameDomain',
          'movie', 'Drag and drop labelling',
          'salign', ''
          ); //end AC code
</script>
<noscript>
     <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="720" height="440" id="Drag and drop labelling" align="middle">
     <param name="allowScriptAccess" value="sameDomain" />
     <param name="allowFullScreen" value="true" />
     <param name="movie" value="Drag and drop labelling.swf" /><param name="quality" value="medium" /><param name="bgcolor" value="#ffffff" />     <embed src="Drag and drop labelling.swf" quality="medium" bgcolor="#ffffff" width="720" height="440" name="Drag and drop labelling" align="middle" allowScriptAccess="sameDomain" allowFullScreen="true" type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer" />
     </object>
</noscript>
</body>
</html>

What you basically need to do is copy the sections of content from the code you show into the template (assuming the template already provides the <head> and <body> sections of the page. So in the head section of what you show, take everything starting with...
<script language="JavaScript" type="text/javascript">
all the way down thru...
</script>
, inclusive (in the head section only), and paste that into the head section of your template.
Similarly, take everything that lies between the <body> ... </body> tags (exclusive of the body tags) and paste it into the body section of your template wherever you plan to display the Flash file.

How do you stream a live video to a website

OK - Again I'm feeling smart enough to be real dumb.
How do you stream a live video to a website. I use GoDaddy to host a website. I can plug a video camera into my Mac so I can run the video through whatever program works best. I even have a .mac account (now its mobile me I guess) and could use that. I have read several threads but can't really find a starting point. Any help is appreciated.
I want to video a basketball game and stream it to our schools website.
Thanks again.
CD

You may not be able to embed VideoLobby into your existing website, but this article appears to have some useful links:
_VideoLobby Wants To Help You Create Your Own Custom-Branded Live Webcasts_
Also these for the Mac:
http://www.telestream.net/wire-cast/overview.htm
http://www.apple.com/quicktime/broadcaster/
t4tennessee wrote:
I want to video a basketball game...
Be aware of what you're videoing:
http://www.dothetest.co.uk/basketball.html

Problem inserting Flash video into DW CS3 template

I would like to insert some flash video into an editable
region inside a DW CS3 template. The template I am using seems to
work for literally hundreds of other pages I have made (none of
which, incidentally, have any media of any kind in them).
I have created the template and then an editable region and
now want to insert the flash video in that editable region. All
goes well until I hit the OK button. then I get this error--Making
this change would require changing code that is locked by a
template or translator The change will be discarded.
Can anyone suggest how I might over come this error??
Thx.
Jane

The problem is the detection option in the video insertion
dialog. If you
disable that option, you will not get the error.
This is a problem because the detection routine requires a
modification to
the <body> tag (insertion of an onload event) which you
cannot easily do in
a template child page.
If you really must have the detection, then you can copy and
past the load
call from a dummy (non-templated) page on which you have also
done the same
insertion. Post back with that page's body tag code, and I'll
show you
how....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jane Smith 2300" <[email protected]> wrote
in message
news:fehcup$e6u$[email protected]..
> Further to my post before--The .htm that I am trying to
insert the Flash
> video
> (converted an AVI file using Flash video encoder) was
built from a .dwt.
>
> The template page has several editable regions in it.
There is also CSS.
> formatting the document. I am trying to insert the Flash
video into one
> of the
> editable regions.
>
> I have no problem installing the video in a page not
built with a template
> or
> without css..
>
> Thanks for any help you can provide.
>
> jane
>

How do you embed ePub3 in a web page using 'embed code'?

I have an epub3 that i desperately need to embed onto my web page.
I am using Weebly who allow for embed code on the web page, and also have a code editor where you can upload files.
Is it easy enough to somehow upload the mp3's that are in my epub, and then explode the epub and simply copy and paste this html code into the embed code function from weebly?
This is what I have found so far, but I am no code expert!
http://stackoverflow.com/questions/7419205/how-do-you-embed-an-epub-in-a-web-page

That is an interesting question. Since epub3 is based on everything that a web page is made of and is often called a web page in a box, I doubt that current browsers can show the document. Browsers are only now catching up with showing an SVG image. I suppose that, if an epub3 reader is available on the client, it should theoretically be possible. Think of a Word or a PDF document.
IMHO, the best way out is to convert the book into a PDF format.

How do you embed a Flash video into a Flash form

Similar Messages

Maybe you are looking for