How do you ensure that WiFi is selected over Cell?

I have not had a Smartphone or Data Contract until my iPhone 5. I am looking for tips on how to ensure WiFi is prioritized for Data vs. Cellular, but don't know how best to configure this prioritization. I tried just turning the Cellular Data Off, but that causes Voice Mail to be turned off as well. When I depressed "Phone" and then "Voice Mail Icon" for the first time, it said I had to set up Voice Mail. It told me to enter a password and then re-enter it. I saved that and then it asked if I wanted to use a "Default" greeting or a "Customer" one. I selected "Customer" and recorded one. Next it said, "Voice Mail is currently not available, try again later. I tried a number of times and it continued to be unavailable. I then tried a different meathod, by just going to "Phone" and then "Keyboard" and then depressing and holding "1". It said I needed to setup Voice Mail and that Cellular Data needed to be turned on to use Voice Mail. I turned that on and then recorded a password and greeting. It was a totally different graphical walkthrough vs. the first meathod. I tested it and the greeting now works. Am

As woodmeister50 said, the WiFi will be used preferentially by the iPhone when both cellular and WiFi are available and turned on - this is automatic. Unfortunately if you are concerned about that, there is no way to be sure you are not using cellular data unless you turn cellular off (either through Airplane Mode or Celllular settings), but obviously you need the cellular network for Voice Mail and calls.
By the way, you can turn Airplane Mode on and subsequently turn WiFi on (Airplane Mode will turn it off, but you can just toggle it back on), which will also ensure you are using WiFi only.

Similar Messages

When a cd is not recognised by gracenote data base, how do you ensure that it dowloads all together in recently added. I am trying to download a nn 8 disk compilation and itunes is putting all track 1/track2 etc together

i am trying to download a compilation of 8 cds which are not recognised by gracenote database. how do I ensure that the disks download seorately. My last try had all track 1/2/3 together rather than 1 - X in each cd

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

How do you ensure that what I typed in the Phone number must be an 8 digit number?

Hi all,
I am now creating a text box that allows a person to type in an 8 digit phone number according to my country's specifications. If a person types in a single digit, how do I have a validation check to ensure that he has to type in 8 digits? Under Validation Pattern, I typed in 99999999 but the person can still type in a single digit and still pass through! It will only validate when a person types in more than 8 digits.
What gives?
Thanks for reading!

Again, I use code to check the string against a regular expression. My expressiong validates that a string contains valid US phone pattern. Ex. (999) 999-9999 or (999)999-9999 or 1234567890
Here's my function that I put in a script object called scoAllScripts:
function validateUSPhone(strValue) {
DESCRIPTION: Validates that a string contains valid
US phone pattern.
Ex. (999) 999-9999 or (999)999-9999 or 1234567890
PARAMETERS:
strValue - String to be tested for validity
RETURNS:
True if valid, otherwise false.
var objRegExp = /(^\d{10}$)|(^$[1-9]\d{2}$\s?\d{3}\-\d{4}$)/;
//check for valid us phone with or without space between
//area code
return objRegExp.test(strValue);
Here is the code that I put in the Exit event of my phone number field:
if (!this.rawValue == "") {
if(!xfa.form.FSOrder.PAGE1.variables.scoAllScripts.validateUSPhone(this.formattedValue)) {
xfa.host.messageBox("Please enter a telephone number including area code in the format '1234567890' or '(999) 999-9999'");
Hope that helps.
If you need more help with field validation (i.e, more regular expressions), you can easily find RegExpr pages using a Google search.

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport

HT204216 Used to highlight just the portion of an article that I wanted to print and press print selection only. How do you do that with a MAC?

Used to highlight just the portion of an article that I wanted to print and press print selection only. How do you do that with a MAC?

Depends to some extent what application you're printing from, and what printer you're using, but here's the dialogue box for ⌘P in Firefox -
Note the option to print selection only.
Haven't looked before, but I can't find anything similar in Pages print options.
It does appear in Word though.
Message was edited by: noondaywitch

How do I ensure that, /sapsll/prcts~guid_pr is same as /sapsll/prcon~gui

Hi
Please review the query below, this is from one of the report at work.
How do I ensure that, /sapsll/prctsguid_pr is same as /sapsll/prconguid_pr.
Or in other words, how do I ensure or know that they both means the same.
select *
from /sapsll/prcon
INNER JOIN /sapsll/prcts
    ON /sapsll/prctsguid_pr = /sapsll/prconguid_pr
      into CORRESPONDING FIELDS OF TABLE lt_product_class.
Edited by: Sivanantham kandan on Aug 26, 2008 2:49 PM

SY-DATUM is not part of the table , so it is not possible to do that. but you can do that in reverse.
INNER JOIN /sapsll/ctsnum as a
ON a~guid_ctsnum = /sapsll/prcts~guid_ctsnum
AND a~DATAB le sy-datum   you can do this....
AND a~DATBI   ge sy-datum
INTO CORRESPONDING FIELDS OF TABLE lt_product_class_temp
FOR ALL ENTRIES IN lt_product_class
WHERE /sapsll/prcon~congr IN sp$00017"

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

My iPhone was stolen. I just got a new one and am trying to backup my contacts and data from iCloud. How do you do that?

my iPhone was stolen. I just got a new one and am trying to backup my contacts and data from iCloud. How do you do that?

If your backup is in iCloud, and your new iPhone is already set up, go to Settings>General>Reset, tap Erase All Content and Settings, then go throught the setup screens on the iPhone and when given the option, choose Restore from iCloud Backup and follow the prompts. (If it isn't set up yet, just choose this option when setting it up.)
Be sure your iPhone it connected to wifi and your charger while it is restoring the backup.

I own a ipad mini and a iPod touch , both configured on the same apple account, how do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the ipod

I own a ipad mini and a iPod touch both configured on the same id
How do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the iPod touch when the iPod is connected to a wi fi connection

Mail: do not have the same account loaded onto the two devices.
Photos: go into Settings->Photos & Camera->and turn off photo stream.
everything else, sign out of the Apple ID on the device you dont want to be visible.
good luck

Im syncing my iphone to itunes because i cant unlock the phone due to water damage so that i can take what is on it and put it on a new phone. how can i ensure that everything was taken from the phone and where can i find it in itunes?

my phone recently suffered water damage so that the screen does not reigster when i slide to unlock. I am sycing the data from the phone onto itunes so i can put it onto a new phone. How can i ensure that i took everything off of the old phone before i restore it and where can i find all of that stuff when i sync with the new phone?

iTunes will only store a back up of the iPhone and you find this by following the steps below:
Windows
Edit>Preferences>Devices
Mac
iTunes>Preferences>Devices
The link below can show you what is stored in an iTunes back up:
iTunes: About iOS backups

I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

If you bought Lion from the App Store, you can't legally or practically transfer it, because it's tied to your Apple ID. Reinstall the original software from the discs that came with the machine.

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

Well if you got the Phone Pggray43 at a Local Corporate store in your Area) you should be able to return it as long as you have all the contents.! Phone, Charger and any other accessories that came with it the Box of Course.. As long as you have not went past the 14 Day return.. the store can go over what you used as in Air Time and Data..
Now if you've went past the 14 Day return you be Liable to pay a E.T.F = Early Termination Fee the fee for this is around $300 so hopefully you have not went past the 14 Day return window the Manager if Available is the one I would talk to tell them your on Social Security and you just can't afford a phone as this I'm sure they'll work with you to get something solved..
Hope ya have Good Luck.! b33

How can i ensure that the time capsule back up all my data?

how can i ensure that the time capsule back up all my data and no any data missed during the back up? becz i was backing up my mac to time capsule for the first time and it takes only 5 hourse for 279GB which is doesnt make sense
any idea, how to ensure that all my data been backed up

well this tells you why you are having issues.. since you have a filevault and unless you are logged on as that user TM has no way to backup the vault.
so that is why the backup is so small.
And you cannot remove the file vault because the disk is too small.. you are in catch 22..
You cannot backup and you cannot remove the vault..
Login as the user who has the file vault and copy the files off the computer to a directory on the TC.. Then just delete the files on the computer.. that will then allow you to remove the file vault.
But never will I ever use file vaults so I am being theoretical .. please read it up yourself.
http://pondini.org/TM/25.html
You are not doing the background reading you need to understand what you are doing..
read the whole of pondini's info.. or at least skim it so you know what is there.
Avoid like the plague file vaults..
When disks go belly up, as they always do.. your files will be lost. Somewhere they need to be stored in the clear.. so why bother .. put better security on the computer and forget vaults.

How do I ensure that when a user clicks a box on the check box widget, the check box remains?

Hi, I am using Captivate version 7. I am using a Checkbox widget on a slide. When the user checks the check box and then closes out of the course, how do I ensure that when the user goes back into the course, the check box remains? We're posting on an LMS. Thanks!

Every widget, variable is reset when a course is restarted. Moreover you cannot control what is checked in the Checkbox widget by another action than the user click, even though you can change the value of the associated variable. I think you'll have to look for another solution.

How do you ensure that WiFi is selected over Cell?

Similar Messages

Maybe you are looking for