How do you enter unicode character alt-255?

I need to enter a blank space in a tumblr headline. I can't figure out how to enter alt-255 for the blank.

The software in use here before the current one used to do that, too. Try entering a non breaking space, if HTML is allowed. You would enter it as:
 
This software won't let me enter this the way it's supposed to display. It would be the ampersand character followed by nbsp;

Similar Messages

  • How do you enter recovery mode disc utility?

    On a mac mini server, how do you enter recovery mode disc utility? Before you roll your eyes, the problem I am having is obviously using bluetooth keyboard, on rebooting, it puts the keyboard to sleep so pressing CMD R whilst rebooting doesn't seem to register. Is there any way of doing this using bluetooth keyboard or do I need to get a wired keyboard?

    Thanks, I couldn't tell because I don't have a Restore partition.

  • How do you enter a Capital letter on the iPod touch?

    Sorry for the silly question. But how do you enter a Capital letter on ipod touch? I was entering my network password and first letter is a CAP and for the life of me I could not get it right
    Thanks

    Hi Anna,
    This double tap thing had never worked for me. Surprise, there is a preference to enable it.
    Settings > General > Keyboard > Enable Caps Lock.
    Thanks for hint. Easy.
    ivan

  • HT2486 How do you enter an extension to a phone number in contacts?

    How do you enter an extension to a phone number in contacts?

    From OSX daily:The easiest way is through your iPhone or add a semicolon ";" NOT a comma in Mac Address book .
    Though you’ve long been able to add automatically dialed extensions to contacts on the iPhone, the newest versions of iOS handle extensionsmuch more intelligently, allowing you to create a “Dial Extension” button to any specific contact. That extension dialer can be activated manually, making the navigation of telephony menus infinitely easier, here’s how to quickly add this to a contact:
    Open Contacts and tap the contact name to add the extension to, then tap the “Edit” button
    Tap the phone number entry, place the cursor at the end, then tap the “+*#” button to access additional options
    Choose “wait” then enter the extension afterwards, it will add a semicolon and the extension afterwards to the address appearing like so: 1-888-555-5555;123
    Tap “Done” and exit out of contacts
    Now dial the contact to discover a “Dial 123″ button has appeared, tap that whenever you want to dial the extension
    The extensions can also be added from a Mac in Contacts (Address Book) by adding a semicolon to numbers followed by an extension, just be sure to sync it through the same iCloud account or it won’t go over to the iPhone.
    Anyone who frequently uses extensions to reach specific people at an office, or anyone who has battled an automated phone system knows how useful this can be. You can even set a string of numbers, though the Dial button remains the same.

  • In Font Book OS 10.8.5 how do you insert a character with Font like you could in 10.6

    In OS 10.6 I could go >edit>special characters: view glyph, glyph Catalog, Font: <font name> and I would see a table of each character in a font. Then, I could select a character and either drag it to my document or click Insert Font in the lower right hand corner and it would put the character into the document.
    How do I do the same thing in OS 10.8.5? How do I insert a character into a document through fontbook or any other manner?

    You need to use another app for this, like Ultra Character Map or Popchar.
    This should only be necessary if you are using a non-standard font, which may not be a good idea (since there is no guarantee your glyph will be seen by anyone else).  If the character exists in Unicode, you should be able to find it in Character Viewer and input via double-click or drag/drop.
    If you provide examples of what you need to input, I can perhaps tell you how to find them.

  • How to display a unicode character in a list ?

    Hi,
    sorry if the question seem to be really easy but I doenbt found of to diaply a special character in a list.
    I thank that it was easy :
    1) display tha windows character map
    2) copy paste the charatcter in the ABAP Program to obtain something like this :
    write '&#8804;'.
    But the displayed character is '#' . So, could you tell me how to display a gived unicode character ?
    Regards,
    morgan

    Hello Morgan,
    you need SAP system with unicode. You can check it from every dynpro/mode:
    System->Status: SAP System dada  Unicode system: yes
    I have checked your sign '&#8804;' on my not UC system: is displayed: '='.
    Bye,
    Peter

  • How do you enter and display album liner notes

    Ipod Touch, 16gig, 2nd generation. I have a sizeable jazz collection and am ripping a lot of CDs. No problem on adding album art. Question is, how can I enter album information such as side men (like the album may be Cannonball Adderley, but I want to note that John Coltrane played tenor on tracks x, y and z), when the album was recorded and where, historic facts of interest, etc. When I right click an album I've entered in the music section, I go to a page where I add my album art and I see a comments section. Is that it? But, as important, when I'm listening to the album on my Touch, how do I retrieve the notes on the Touch screen to read them?
    Thanks for any help!

    Paste the liner notes into the lyrics field in iTunes. They will then be visible on the Touch when you tap the album art (not in Coverflow)

  • How do you change the character color for text msgs?

    How do you change font colors for text messages in iOS7 for an iPhone 4S?

    never mind... i got it
    its was the contentbackgroundcolor property....

  • Nokia E71 - How do you enter a HEX WPA Key?

    Hi All,
    I have WiFi at home and I typed my ASCII Network Key in when connecting to the network and it worked perfectly.
    At work I have WiFi and a 64 digit hexadecimal 256 bit Network key and I can't seem to be able to enter it when asked for the network key...After playing around with the different options i was able to enter a maximum of only 63 characters.
    I don't have the ASCII passphrase, so i need to make the hex key work.
    How do I enter a Hex Key, has anyone done this... help please.
    hex key:
    5b6690d71850c17e4c0d7c0bee242fa06ddd706dc4b416a07d39b6d1252d11b6
    Thanks
    Message Edited by yuiou on 12-Jun-2009 08:50 PM

    Fortunately I was able to resolve my problem and I learned something about WPA keys in the process.  In my case, I originally retrieved the key from my laptop using a utility.  It displayed the 256 bit key as a 64 hex characters.  It turns out there was a typable ASCII key that worked.  The reason the hex key couldn't be translated to typable ASCII characters is that it is actually a 256 bit hash calculated from the 63 byte ASCII key combined with the SSID.  The E71x apparently supports entering the key either as the 63 byte ASCII key or as its 256 bit hex hash.  If I understand correctly, the latest implementation of WPA specifies an ASCII key converted to a 256 bit hash but earlier versions allowed entering a 256 bit key directly as hex.  I guess the latest implementation makes sense since hashing the key makes it less vulnerable to a dictionary attack, but it would be nice if the E71 supported entering the the key as hex.

  • How do you define which character set gets embedded with a font embedded in the library (i.e. Korean)?

    I have project that uses a shared fonts. The fonts are all
    contained in a single swf ("fonts.swf"), are embedded in that swf's
    library and are set to export for actionscript and runtime sharing.
    The text in the project is dynamic and is loaded in from
    external XML files. The text is formatted via styles contained in a
    CSS object.
    This project needs to be localized into 20 or so different
    languages.
    Everything works great with one exception: I can’t
    figure out how to set which character set gets exported for runtime
    sharing. i.e. I want to create a fonts.swf that contains Korean
    characters, change the XML based text to Korean and have the text
    display correctly.
    I’ve tried changing the language of my OS (WinXP) and
    re-exporting but that doesn’t work correctly. I’ve also
    tried adding substitute font keys to the registry (at:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\FontSubstitutes) as outlined here:
    http://www.quasimondo.com/archives/000211.php
    but the fonts I added did not show up in Flash's font menue.
    I’ve also tried the method outlined here:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16275
    to no avail.
    I know there must be a simple solution that will allow me to
    embed language specific character sets for the fonts embedded in
    the library but I have yet to discover what it is.
    Any insight would be greatly appreciated.
    http://www.quasimondo.com/archives/000211.php
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16275

    Thanks Jim,
    I know that it is easy to specify the language you want to
    use when setting the embed font properties for a specific text
    field but my project has hundreds of text fields and I'm setting
    the font globally by referencing the font symbols in a single swf.
    I have looked at the info you've pointed out but wasn't
    helped by it. What I'd like to be able to do is to tell Flash to
    embed a language specific character-set for the font symbols in the
    library. It currently is only embedding Latin characters even
    though I know the fonts specified contains characters for other
    languages.
    For example. I have a font symbol in the libary named
    "Font1". When I look at its properties I can see it is spcified as
    Tahoma. I know the Tahoma font on my system contains the characters
    for Korean but when I compile the swf it only contains Latin
    characters (gylphs) - this corresponds to the language of my OS (US
    English). I want to know how to tell Flash to embedd the Korean
    language charaters rather than or as well as the Latin characters
    for any given FONT SYMBOL. If I could do that, then, when I enter
    Korean text into my XML files the correct characters will be
    available to Flash. As it is now, the characters are not available
    and thus the text doesn' t display.
    Make sense?
    Many thanks,
    Mike

  • How can you enter a line-break when using a Bluetooth Keyboard or onscreen Keyboard?

    In Pages &amp; Keynote the only way to force a line break I have found is to put your finger at the end of a line until the select/insert option appears and then selecting insert, then select line break.
    This is frustratingly slow when typing a presentation or document so I bought a Logitech Ultrathin Bluetooth keyboard assuming that would have the Shift+Enter shortcut to make a line break. It doesn't, nor can I find any key combination that does, it's always a new paragraph, or nothing happens.
    I have an Ipad3,  IOS 6.1.3. I've spoken to Logitech support - they said talk to Apple iOS support, I spoke with a chap at IOS support who didn't know what a line break was, didn't know shift+enter on a PC made a line break so didn't understand my question and ended the call.
    Anyone know how to create the shortcut as an alternative to the onscreen slow way?

    Yes
    http://support.apple.com/kb/HT5633
    You can also download the remote app if you have an IOS device

  • How do you use a field for 255 characters plus in HCM?

    There is a 255 character max on the fields in the HCM process and forms.
    I see some types in there:
    QISR_TAB_TYPE
    QISR_TAB_TYPE_TEXT
    QISR_TAB_TYPE_STRING
    I see the text one is for no length restriction, but when I apply it to the field in designtime interface but still everything truncated at 255.
    Is there anyway to use more than 255 characters in a form field in adobe livecycle designer - SAP HCM?

    1694040 - SAP_PD process description fields truncated - 1429386  DTT - wrong data element visible for generic service fields - 1492109  Wrong generation of fields of type pad_long_text 2. In form scenario - change the data element of affected field from You will have to specify long text using multiple field indices. In form scenario - change the data element of affected field from STRING to PAD_LONG_TEXT. check your generic service again Kindly use the data element PAD_LONG_TEXT for the fields which are to hold more than 255 characters. For the usage of this data element, you may refer to the note 1401338 released by PA-ER for the requisition request process.

  • Help!, How do you enter British Pound/Euro symbols?

    Hi,
    I bought an american version powerbook because as an fairly apple newbie turn intermediate level mac user each key was well spelt out in words than the rather symbolic based british keyboard layout. Now funny question is does anyone know how to enter British pound and Euro symbols on an american version powerbook, cos i dont want to be copying and pasting

    £ is Option + 3
    € is Shift + Option + 2
    Also, consult Keyboard Viewer for the key commands for other commonly used characters. You can find Keyboard Viewer by clicking on the flag icon in the menu bar. To activate this menu bar item, go to System Preferences > International > Input Menu and check the box, 'Show input menu in menu bar,'
    Tuttle

  • How do you enter RELEASE DATE for your albums in i-Tunes?

    I can see the column titles Release Date but I don't know how to enter the information. Does anyog know how to?

    Midi,
    Welcome to the Apple Discussion forums.
    If you click on any tune, and then hit command+I, you will get the information for the track. Click on the "Info" tab in this pop-up window and you will see there is a place to enter Date.
    You can put whatever date you want to in here. I try to put release dates in this box myself, for music I did not buy from the iTunes Music Store. For example, right now I am looking at a Thelonius Monk track from Live at the Jazz Workshop that was released in 1964, and so I've labelled it as 1964 in the date field.
    Hope this helps.
    A
    iBook G4 1.2GHz   Mac OS X (10.4.9)  

  • In Pages on Ipad, how do you enter a Tab using the screen keypad?

    Hi,
    I have an iPad2 and am using Pages, Notes and a few other apps. Pages has and supports tabs in the document, but I have yet to find a TAB key in the on-screen keypad? It works fine off the bluetooth keyboard, but I have access to that only about 20% of the time.
    Thanks for your help.
    ...Doug

    http://www.gordonmeyer.com/2010/04/how-to-enter-a-tab-or-page-break-in-pages-on- ipad.html

Maybe you are looking for

  • Can't delete a file or folde after using admin. password.

    Can't delete a file or folder after using admin. password.

  • Upgrade 4.7 to ECC 6.0 : Batch input

    Hello, We have an upgrade project from R3 4.7 to ECC 6.0. I'm looking for information regarding SAP technical advise for interfaces, data update, data creation. We use batch input. Does this technic still available in ECC 6.0 ? Should we use Idoc, BA

  • IPad build vs iPhone build

    hey guys, just in general. is there any difference between a iPhone build or iPad build (provision profiles, etc.) or is everything the same just connect the iPad and use it as a iPhone like? thanks

  • How do I modify the test of an enumeration programmatically?

    Hi everyone, I have an application with 8 scopes on it and the data displayed on the scope is selected by a drop down menu which is an enum control that is a typedef.  Since this application interfaces with different hardware, I need to be able to ch

  • New Intel iMac, FCE 3.0 and dropped frames on capture

    Just got a brand new 20 inch iMAC running 10.4.9 with 2G of RAM and over 200G of space. Can't capture more than a minute or two of footage to the hard drive without a dropped frame abort. Have no problems capturing the same tape to a nearly full Laci