How do you export large audio files?

I made a mix which is about 20 minutes long and seems to be around 600MB. There are 13 songs and I put each song on a separate track. Ive tried bouncing, exporting and sharing and anything I try results in Logic Pro X (version 10.0.1) starting the process then quitting. Does anyone have any suggestions on how to export this file. Ill be honest I don't really have a clue what I am doing. I just recently started using Logic and I am still learning! I wanted to put this mix up on soundcloud so if anyone could give some suggestions that would be very helpful! Thanks!

if the outfile is much larger than 600MB then...
Bounce out as a PCM .caf file.... which allows for much larger maximum file sizes....up to 13.5 hours at 16bit/44.1k for example..
...Also.. if it isn't the size of the output file that is causing the issue.. bounce out in realtime mode rather than offline mode.. to a Wav or MP3 file... in case it is a plugin that is causing the bounce out to quit... and then upload the resulting MP3 or wave file to Soundcloud manually...
Finally, make sure you have set the start and end times in the bounce out dialog box.. to reflect the correct start and end times of your project....

Similar Messages

How do I export detached audio files as separate files, for Pro Tools processing?

My project is a live band performance. I have every song as a separate Event with associated audio. I have detachd all the audio from all the video Events. I now want to Export the audio files to Pro Tools for editing, then Import the edited audio back into FCP X and snap the edited audio to the associated video Events.
My problem is this: FCP X keeps exporting the audio as a single large WAV file, rather than as separate WAV files. In fact, the video events are separate, and so the audio associated with the video Events are separate.
I first renamed the Role of every audio file as "Music", then did a Share --> Export Media of all "Music" audio Roles. After exporting, I found it was one large WAV file, rather than separate files of different sizes.
As a 2nd try, I created Sub-Roles for each audio clip, and named each one with a distinct Sub-Role name. I then Exported all these Sub-Roles (yes, tedious). The result was that every exported WAV file was the same size, the same as the file size in my first try. The only audio that could be heard in each file was the audio in that particular song, but FCP X still created the very large file with silence in all the rest of the file. Since the file lengths don't match the original audio fil lengths, there will be a problem when I Import the edited files back into FCP X and want to Snap them into place.
Question:
How can I export the individual detached audio clips as separate files, the length of each file equaling the length of the original audio file in FCP X?
Do I need to separate the detached audio into separate Layers visually in the Project Timeline, so they are not touching? Or does this matter?
Help!!

Michael Holmes1 wrote:
I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
No.
You need to explore Compound Clips. This workflow may or may not be of help.
Select an Event with clips in it and press Option+G to make a (blank) compound clip.
Select the Event Browser, create a new Event and call it 'Effects'.
Drag the Compound Clip into this Event.
Right-click the clip and select 'Open in Timeline'.
Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
Now open a project and select and copy one of the clips with effects etc.
Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
Andy.

HOW CAN YOU PROCESS AN AUDIO FILE IN LABVIEW?I NEED TO TIME-PITCH SCALE IT

hello guys.
can you insert an audio file into labview for further processing?i need to get an audio file (stored on my computer) and further process it for time-pitch scale.does anybody know how?any pointers will much be appreciated.
regards
alex

hi there
open the "Graphics & Sound" palette from the functions menu to use vis for reading/Writing wavefiles, search the examples shipped with LV for first steps. use the VIs in the "Analyze" functions palette to modify the data.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How do you export separate audio tracks for Pro Tools?

I need to give separate audio tracks to my sound mixer but am confused on how to do so in FCP X.
So far I've:
Set the dialogue roles and stems for each character
Then I went into Master File>Settings
Selected:
"Format: Audio Only"
"Audio File Format: Wav File"
"Roles as: Audio only as separate files"
"Dialogue"
Sara
"Stereo"
And when I export and listen back to the wav file, there is either no audio or I hear select dialogue.
The only thing I can think of that I am doing wrong, is that each characters dialogue is not on the same track like the picture below. The tracks highlighted is of one character's dialogue that I am trying to export onto one linear track to export into Pro Tools.
Can tracks be assigned in FCP X? Or is there a crucial step that I am forgetting tthat explains why the audio for each character is not being exported.
Thanks!

If you're dumping audio for ProTools, you should be able to export XML for use in PT. Haven't done it myself, but the option's been there for a while now. You should be able to find instructions easily.
If you want to stick with making Roles work, I suggest making sure the roles are assigned properly to each clip. Kind of a super pain in the neck, to go one by one, but ... that's the way. There are key commands for the three default roles, but if you've created custom ones then it's more time consuming. Is that 'Sara' one a custom Role that you've created?
My only thought is you have compound audio clips there. Maybe go in and set the roles on the individual files inside the compound clips. Dunno...
The visual organization shouldn't matter (one track above another). That's the X way.
((In your picture, you say you have some files selected. When I select, I get a yellow border; yours are light green and dark green. What is that?))

How do you make MP3 audio files?

I'm running for public office, and a local newspaper invited candidates to submit statements, along with MP3 audio files for display on its website.
So how does one make an MP3 audio file? Is this something I can do with my MacBook Pro and Leopard alone, or do I need to obtain a special software program?
Thanks.

Hi David!
As Francine mentioned, you will want to use the audio production software that came with your Mac, called Garageband. This will let you record speech, and even layer in music, etc. And when everything is set as you like it, the sound file can be exported in a variety of formats. It will provide a great basic audio recording solution for strictly voice and talking, but you can take things one step further and layer in a music track as an intro or outro if desired for a little more flair, edit out mistakes, etc. A great program that comes right with your Mac. There are nice basic tutorials on the Apple website which give an introduction to Garageband. Good luck David!

How do you simplfy STP audio files?

A lot of the sound effects files in Soundtrack Pro have like, 6 channels when I bring them into FCP. I don't need that for my purposes. It just gets in the way. What do I do?
Thanks!

Hi dm,
there are several things you can do.
-Select the audio and hit Option+C to nest the channels
-If they are .caf export the track as Aiff from STP and when you drag the audio clip onto the timeline hit Command+L and delete the 4 tracks from the third to the 6th downward.
-Select the audio track and hit Command + L and delete the unwanted channels.
-Unlink Audio Source from Destination from 3rd to 6th audio track as shown in the pic below then grab the audio and drop it on the timeline making sure the cursor hovers over the video tracks displaying an arrow pointing down.If this is done correctly only the first two audio track will be dropped.
!http://i533.photobucket.com/albums/ee340/gogiangigo/Source-Destination.jpg!
- you could also lock the audio tracks so that when you drop new audio the locked track remains unaltered (see lock icon on the left hand side of the timeline and in the image above).
G.

How do you start 2+ audio files playing at the same time?

I am trying to play 2 audio files at the same time, but I cannot figure out how to start them playing at the same time without latency issues.
If someone can please explain the process for doing this using Audio Queue Services, I will forever be in your debt.
This is for iPhone, but I was getting no love in those forums on this issue.

Thanks for your reply. Apple's iPhone Application Programming Guide states the Following:
*Playing Multiple Sounds Simultaneously*
To play multiple sounds simultaneously, create one playback audio queue object for each sound. For each audio queue, schedule the first buffer of audio to start at the same time using the AudioQueueEnqueueBufferWithParameters function.
This leads me to believe that it is possible. I have just not been able to get them to play precisely the same time, there is always delay.

How do you export a RAW file from Lightroom?

I am trying to export my RAW files to my desktop (on a mac) so that I can send the files via email. Is this possible?

You can't save it as the original RAW file, (e.g. .CR2 or .NEF) but you can export as a DNG file. Go to File settings > Image Format > DNG.
P.S. You should be able to send an NEF or CR2 file by email as long as it doesn't exceed the file size limit

How do you edit the audio files in the slideshow of my idvd project?

I have created a project in idvd and I dragged and dropped in the music files from the audio tab that I wanted - I selected multiple songs (2) and I hear them play just fine. The problem is that I want one song to play for a certain section of the photos and then I want the other song to start at a particular point. Why am I not able to edit the music in the slideshow and how can I do that?

iMovie is a good way to do this if your project is film based. If your using photos (slideshow) in iDVD, I would be inclinded to use GarageBand to edit the audio portion of your project (It may be just me, but whenever I've attempted to create a slideshow in iMovie, the photos look "grainy" to me, not as clear).
If you know the time of when you want your songs to change, you can adjust the length (time) of each song in GarageBand as well as fade in/fade out transition of the two or more songs. After saving, you then can access the saved audio mix via the audio tab in iDVD. (I'm making an assumption that one might be familiar enough with GarageBand to do this

How do you unlink stereo audio files as opt-L did under FCP 7?

Under Final Cut 7, I was able to unlink a stereo file and move the left and right tracks independently forwared and back (manually stereoizing the sound if I wanted to). I see how expand an audio sound and changing panning on left and right, but no way to move the left or right track a few frames independent of the other as in FCP 7. Is there a way to do it?

You mean shifting them out of sync? Change the channel configuration to dual mono and detach the audio.

How do you slow down audio files?

Hey everyone! I was wondering if there is a way that you can slow down audio (not midi) in Logic. I really need that ability so I can start transcribing a lot of pieces for my music lessons...
If Logic doesn't have anything like that, is there a free software I could download (that is NOT one of those trial ones that only play 3 min of the song or can't export)? If it costs somethin', which one is cheapest but has good enough quality?
Cheers, thanks!

Have you tried to use the Time and Pitchmachine within the Sample Editor of Logic. To a certain degree you could certainly slow it down. If youre not happy with that, you probably would have to use another software or buy a third party plugin (like serato's pitch n' time)...
Manuel

How do you delete unused audio files w/out deleting what you want to keep?

I've tried project...clean-up but that's not taking out the 100's if not 1000's of takes that aren't needed.
Thanks in advance

This should help:
http://discussions.apple.com/thread.jspa?messageID=9029605&#9029605

How to move large audio files to deskop from iPhone?

How can I move large audio files from my iPhone 4S (IOS7) to my iMac (OSX 10.5.8)?
I can not use:
- iTunes (will not install high enough to this ol'mac to work with IOS7)
- cloud-servers
- email, iPhone will not mail that big files...
- image transfer program (will not work with audio files)...
- etc.
Is there any cable that will work? Can I modify my iPhone? Is it possible to move back from iOS7 to iOS6?
This is kind of a big issue for me because I make long interviews with my iPhone but now I do not know how to move the files from my iPhone to my iMac for editing and pubishing.
All ideas are welcome (except buy a new iMac)! Thanks in advace!

dileep2all wrote:
i have icloud problem.   plz help
we have mobile shops
i buy mobile from custmoer.   when customer went away. i make formated.   icloud is showing. i have all with box mobile everything
You cannot use the iPhone unless you have the previous owners AppleID & password.
See this -> Find My iPhone Activation Lock: Removing a device from a previous owner’s account
Sounds like you need to change your process when you buy used iPhones.
See this -> What to do before selling or giving away your iPhone, iPad, or iPod touch

How can I add an audio file to each slide when I export to HTML Keynote 6.2

How can I add an audio file to each slide when I export to HTML Keynote 6.2
I am trying to create an audio slide show instead of a movie

Drag and drop one music files onto each slide then export. (File > Export > HTML)

How do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

how do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

Go here:
http://help.apple.com/logicpro/mac/10/
Search on Bounce

How do you export large audio files?

Similar Messages

Maybe you are looking for